I have the subject motherboard in a Maxtor NAS with an Intel 815e chipset
which should (according to the Intel docs and the Supermicro manual)
support ATA/100 on the onboard IDE. However the auto IDE BIOS setting does
not detect the connected ATA/100 disk drive correctly (tried several) and
the manual BIOS setting only goes to UDMA4 (ATA/66). Confused, as
Supermicro's own spec in the manual and web page says it has UDMA5 support,
but the same manual also shows only a max of UDMA4 in the BIOS setup pages.
I tried the BIOS update they offer, but no go. Any hints? Thanks for
reading.
http://www.supermicro.com/products/m...15E/370SSR.cfm
Pete
Linear Mode
