Motherboard Forums


Reply
Thread Tools Display Modes

9800 pro reinstall issue with w2000

 
 
Emmanuel
Guest
Posts: n/a
 
      01-20-2009, 10:18 PM
Hi,
I am under W2000 , with a 9800 pro radeon.
Before , this card was working , no problem with omega 4.8.442 and
FarCry.
Now it doesn't work , I'm in VGA mode:
http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg
I can't install again a decent driver , I get error mesage with omega
and os or video card not supported with ati drivers.
Direct3d gives an error message with dxdiag.
What can I do?
Thank you.

--
Emmanuel
http://ebgy.ath.cx


 
Reply With Quote
 
 
 
 
Guest
Posts: n/a
 
      01-21-2009, 12:26 AM
"Emmanuel" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
> Hi,
> I am under W2000 , with a 9800 pro radeon.
> Before , this card was working , no problem with omega 4.8.442 and
> FarCry.
> Now it doesn't work , I'm in VGA mode:
> http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg
> I can't install again a decent driver , I get error mesage with omega
> and os or video card not supported with ati drivers.
> Direct3d gives an error message with dxdiag.
> What can I do?
> Thank you.
>
> --
> Emmanuel
> http://ebgy.ath.cx


Try booting in Safe Mode, and run ATI's uninstall utility (from their website).
Then install an older Catalyst version (one that specifically supports Win2K).

If that goes ok, then try updating the driver.

If nothing else works, you can try reinstalling SP4 and/or DirectX 9.0c.



 
Reply With Quote
 
 
 
 
Emmanuel
Guest
Posts: n/a
 
      01-23-2009, 09:42 PM
> "Emmanuel" <(E-Mail Removed)> wrote in message
> news:(E-Mail Removed)...
>> Hi,
>> I am under W2000 , with a 9800 pro radeon.
>> Before , this card was working , no problem with omega 4.8.442 and
>> FarCry.
>> Now it doesn't work , I'm in VGA mode:
>> http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg
>> I can't install again a decent driver , I get error mesage with omega
>> and os or video card not supported with ati drivers.
>> Direct3d gives an error message with dxdiag.
>> What can I do?
>> Thank you.
>>
>> --
>> Emmanuel
>> http://ebgy.ath.cx


> Try booting in Safe Mode, and run ATI's uninstall utility (from their
> website). Then install an older Catalyst version (one that specifically
> supports Win2K).


> If that goes ok, then try updating the driver.


> If nothing else works, you can try reinstalling SP4 and/or DirectX 9.0c.


I did it.
Delete everything ati labelled in safe mode
Install 6.2 catalyst from ati driver
Delete everything ati labelled in safe mode
Install last omega driver 4.8.442
Install directx9c of March 08
Install SP4
Now everything seems Ok , except I always get this message by right
clicking on the desktop
http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg
What can I do?

--
Emmanuel
http://tigerfr.free.fr
'97 Tiger
'98 KLX300R


 
Reply With Quote
 
Emmanuel
Guest
Posts: n/a
 
      01-26-2009, 08:34 PM
>> "Emmanuel" <(E-Mail Removed)> wrote in message
>> news:(E-Mail Removed)...
>>> Hi,
>>> I am under W2000 , with a 9800 pro radeon.
>>> Before , this card was working , no problem with omega 4.8.442 and
>>> FarCry.
>>> Now it doesn't work , I'm in VGA mode:
>>> http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg
>>> I can't install again a decent driver , I get error mesage with omega
>>> and os or video card not supported with ati drivers.
>>> Direct3d gives an error message with dxdiag.
>>> What can I do?
>>> Thank you.
>>>
>>> -- Emmanuel
>>> http://ebgy.ath.cx


>> Try booting in Safe Mode, and run ATI's uninstall utility (from their
>> website). Then install an older Catalyst version (one that specifically
>> supports Win2K).


>> If that goes ok, then try updating the driver.


>> If nothing else works, you can try reinstalling SP4 and/or DirectX 9.0c.


> I did it.
> Delete everything ati labelled in safe mode
> Install 6.2 catalyst from ati driver
> Delete everything ati labelled in safe mode
> Install last omega driver 4.8.442
> Install directx9c of March 08
> Install SP4
> Now everything seems Ok , except I always get this message by right clicking
> on the desktop
> http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg
> What can I do?


I boot in reduced (F8) mode in win2000
I go to thr control panel/system.
I choose to go to the video driver place.It's the VGA one.
I stopped it and configure it to auto.
I boot and it's OK.
Thank you for help.

--
Emmanuel
http://ebgy.ath.cx


 
Reply With Quote
 
Guest
Posts: n/a
 
      01-27-2009, 03:10 AM
"Emmanuel" <(E-Mail Removed)> wrote in message news:(E-Mail Removed)...
> >> "Emmanuel" <(E-Mail Removed)> wrote in message
> >> news:(E-Mail Removed)...
> >>> Hi,
> >>> I am under W2000 , with a 9800 pro radeon.
> >>> Before , this card was working , no problem with omega 4.8.442 and
> >>> FarCry.
> >>> Now it doesn't work , I'm in VGA mode:
> >>> http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg
> >>> I can't install again a decent driver , I get error mesage with omega
> >>> and os or video card not supported with ati drivers.
> >>> Direct3d gives an error message with dxdiag.
> >>> What can I do?
> >>> Thank you.
> >>>
> >>> -- Emmanuel
> >>> http://ebgy.ath.cx

>
> >> Try booting in Safe Mode, and run ATI's uninstall utility (from their
> >> website). Then install an older Catalyst version (one that specifically
> >> supports Win2K).

>
> >> If that goes ok, then try updating the driver.

>
> >> If nothing else works, you can try reinstalling SP4 and/or DirectX 9.0c.

>
> > I did it.
> > Delete everything ati labelled in safe mode
> > Install 6.2 catalyst from ati driver
> > Delete everything ati labelled in safe mode
> > Install last omega driver 4.8.442
> > Install directx9c of March 08
> > Install SP4
> > Now everything seems Ok , except I always get this message by right clicking
> > on the desktop
> > http://membres.lycos.fr/ebgy/tempo/driver_omega.jpg
> > What can I do?

>
> I boot in reduced (F8) mode in win2000
> I go to thr control panel/system.
> I choose to go to the video driver place.It's the VGA one.
> I stopped it and configure it to auto.
> I boot and it's OK.
> Thank you for help.


Good to hear you got it working.


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
HD disappeared in W2000 with A7V333 Jeff Lake Asus 3 02-14-2004 05:46 AM
W2000 USB driver for SY-5EHM: where to get? John Kuthe Soyo 8 01-27-2004 05:43 PM
Latitude W95->W2000 Upgrade now wants BIOS Disk Password. Ralph Corderoy Dell 9 09-30-2003 05:04 PM
Presario 5660 upgrade to W2000? lwags Compaq 2 08-08-2003 02:03 AM
Help: ATI AIW 128 PRO & MMC 7.7.0.1 - W2000 : Need REGISTRY help I think Jim ATI 2 06-29-2003 06:58 PM


All times are GMT. The time now is 08:29 AM.


Welcome!
Welcome to Motherboard Point
 

Advertisment