how to...add san disk?

I have 400G san I need to create a newfs on.
I ran devfsadm and see the new disk via cfgadm -al:
cfgadm -al
Ap_Id Type Receptacle Occupant
Condition
c0 scsi-bus connected configured
unknown
c0::dsk/c0t6d0 CD-ROM connected configured
unknown
c0::sg/c0t0l0 unknown connected configured
unknown
c0::sg/c0t0l1 unknown connected configured
unknown
(snip)
c1 fc-private connected configured
unknown
c1::21000020373e8057 disk connected configured
unknown
c1::21000020373e9ae1 disk connected configured
unknown
c2 scsi-bus connected configured
unknown
c2::sg/c1t0l0 unknown connected configured
unknown
c2::sg/c1t0l1 unknown connected configured
unknown
c2::sg/c1t0l2 unknown connected configured
unknown
(snip)
c2::sg/c1t9l4 unknown connected configured
unknown
c4 fc-fabric connected configured
unknown
c4::50050763031b00c1 disk connected configured
unknown
c5 fc connected unconfigured
unknown

format
Searching for disks...done

AVAILABLE DISK SELECTIONS:
0. c1t0d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000020373e8057,0
1. c1t1d0 <SUN36G cyl 24620 alt 2 hd 27 sec 107>
/pci@8,600000/SUNW,qlc@4/fp@0,0/ssd@w21000020373e9ae1,0
2. c4t50050763031B00C1d0 <IBM-2107900- cyl 65533 alt 2 hd 60 sec
134>
/pci@8,600000/QLGC,qla@1/fp@0,0/ssd@w50050763031b00c1,0
How do I determine from this output what disks to add (this is done
with cfgadm -c configure, right)

Using SVM I guess I metainit d200 1 1 the first device and metattach
all the follwoing device?

I've never had to work with san disk before and am confised if not
stumped!

As well, are ther any tutorials that explain all this for a wanna be
admin?

Thanks in advance!

wrote:
> I have 400G san I need to create a newfs on.

Please don't multi-post. Use cross-posting instead.

--
Daniel

how to...crosspost?