Motherboard Forums


Reply
 
 
Herb
Guest
Posts: n/a
 
      08-04-2005, 02:31 PM
I have a Shuttle AK31 socketA motherboard that I have been running about 3
years now. What is the fastest Athlon processor that I can use with this
board? I'm running a 1.74GHz now.


 
Reply With Quote
 
 
 
 
Ranger_Rick
Guest
Posts: n/a
 
      08-04-2005, 02:55 PM
Herb wrote:
> I have a Shuttle AK31 socketA motherboard that I have been running about 3
> years now. What is the fastest Athlon processor that I can use with this
> board? I'm running a 1.74GHz now.
>
>

CPU Support: Socket A CPU
AMD Duron CPU with 200 / 266MHz FSB
AMD Athlon CPU with 200 / 266MHz FSB

Front Side Bus
Including 100/103/105/110/112/120/124/133/140/150 MHz

Multiplier
From x5 to x 12.5 by hardware jumper

I'll add that you can "use" any AMD chip designed for a Socket A
motherboard. You might not be able to get full use of it's potential,
for example, a Barton XP3200. But then again you could upgrade later to
a nF2 Socket A board and you could use the full potential of the Barton
(or other CPU). Or just go all out and get an AMD64 with appropriate
motherboard, but I suspect you're working on a budget so that's a bit
extreme.

--
Ranger Rick

--
Ranger Rick
 
Reply With Quote
 
 
 
 
Herb
Guest
Posts: n/a
 
      08-04-2005, 03:04 PM
Thanks Rick, I'll probly wait and go all out with a new motherboard...

Herb

"Ranger_Rick" <(E-Mail Removed)> wrote in message
news:R%pIe.761$(E-Mail Removed) .net...
> Herb wrote:
>> I have a Shuttle AK31 socketA motherboard that I have been running about
>> 3 years now. What is the fastest Athlon processor that I can use with
>> this board? I'm running a 1.74GHz now.

> CPU Support: Socket A CPU
> AMD Duron CPU with 200 / 266MHz FSB
> AMD Athlon CPU with 200 / 266MHz FSB
>
> Front Side Bus
> Including 100/103/105/110/112/120/124/133/140/150 MHz
>
> Multiplier
> From x5 to x 12.5 by hardware jumper
>
> I'll add that you can "use" any AMD chip designed for a Socket A
> motherboard. You might not be able to get full use of it's potential, for
> example, a Barton XP3200. But then again you could upgrade later to a nF2
> Socket A board and you could use the full potential of the Barton (or
> other CPU). Or just go all out and get an AMD64 with appropriate
> motherboard, but I suspect you're working on a budget so that's a bit
> extreme.
>
> --
> Ranger Rick
>
> --
> Ranger Rick



 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
New processor for AK31 Wim Roffal Shuttle 0 10-28-2003 02:25 PM
Re: ak31 rev2 / AMD Athlon XP 1800+ compatability question BigWez Shuttle 1 07-19-2003 07:33 AM
Can AK31 be flashed with wrong BIOS Nightdrive Shuttle 0 07-18-2003 05:52 PM
AK31 v2.0 compatibility with Tbred Athlon XP 2000? Xenomorph Shuttle 5 07-18-2003 04:23 AM
Re: ak31 rev2 / AMD Athlon XP 1800+ compatability question Carl C. Jackson Shuttle 0 07-17-2003 10:11 AM


All times are GMT. The time now is 06:12 PM.


Welcome!
Welcome to Motherboard Point
 

Advertisment