BH6 problem with Tualatin, reset on OpenGL

Two days ago, I put on my BH6 Slot1 MB, Tualatin 1.2 GHz using Asus S370-DL
adapter. Simple modification... 3 pins insulated and two interconnected. It
seems that everything works well except when I start 3D screensaver (which
uses openGL) I get instant RESET (as when reset button is pushed). Half an
hour ago, I got system reset for no reason at all. Now I'm a bit worried.
Anyone has any idea??? Please?
Goran

That goes for Win2K also. Turn off the automatic reboot function and do some
anal. Is this a Rev 1 or Rev 1.1 board? Are you comfortable that the mod is
done correctly?
Note that some have had to reinstall Direct-X and video drivers to get
stability.

"GTD" <> wrote in message
news:...
> On Sun, 6 Jul 2003 23:34:49 +0200, "Goran"
> <> wrote:
>
> >Two days ago, I put on my BH6 Slot1 MB, Tualatin 1.2 GHz using Asus
S370-DL
> >adapter. Simple modification... 3 pins insulated and two interconnected.
It
> >seems that everything works well except when I start 3D screensaver
(which
> >uses openGL) I get instant RESET (as when reset button is pushed). Half
an
> >hour ago, I got system reset for no reason at all. Now I'm a bit worried.
> >Anyone has any idea??? Please?
> >Goran
> >
> >
> >
> If you're using XP, there's an option to restart the computer upon
> system failure. If you uncheck this (control panel, system, advanced,
> startup and recovery), you may be able to see more of why this is
> happening (no doubt you'll still have the crash, but maybe it will
> allow you to narrow down the cause of the crash)




-----= Posted via Newsfeeds.Com, Uncensored Usenet News =-----
http://www.newsfeeds.com - The #1 Newsgroup Service in the World!
-----== Over 80,000 Newsgroups - 16 Different Servers! =-----

"GTD" <> wrote in message
news:...

> If you're using XP, there's an option to restart the computer upon
> system failure. If you uncheck this (control panel, system, advanced,
> startup and recovery), you may be able to see more of why this is
> happening (no doubt you'll still have the crash, but maybe it will
> allow you to narrow down the cause of the crash)

Thanks, but it seems that it's stable on XP. I have to do some more testing.
I have
dual boot and using win98 as my main OS... and the problem is there. I have
reinstaled Direct-X but nothing changed... Is there any program for thorough
CPU testing and diagnosis?
Goran

On Sun, 6 Jul 2003 23:34:49 +0200, "Goran"
<> wrote:

>Two days ago, I put on my BH6 Slot1 MB, Tualatin 1.2 GHz using Asus S370-DL
>adapter. Simple modification... 3 pins insulated and two interconnected. It
>seems that everything works well except when I start 3D screensaver (which
>uses openGL) I get instant RESET

instead of using ak4bridge to ak26, use an11 !
Ups, like I recall for that slotket, you even do NOT need that bridge
!!!

Lower your Vcore to 1,5V & do not pass 1,35GHz if OC-ing! mount extra
HSs to Voltage mosfets & check your PSU & caps.

See also my site!


-- Regards, SPAJKY
- http://freeweb.siol.net/jerman55/HP/Spajky.htm
Celly-III OC-ed "Tualatin on BX-Slot1-MoBo!"
E-mail AntiSpam: remove ##