Motherboard Forums


Reply
Thread Tools Display Modes

BIOS problems with Tyan S2882-D motherboard

 
 
Frank Tarczynski
Guest
Posts: n/a
 
      10-16-2007, 11:31 AM
Has anyone else observed this? Does anyone have experience with the
Tyan S2882-D motherboard?

I'm (still) having a problem booting my Tyan S2882-D
motherboard from a SCSI disk when a SATA disk is has been added.

Tyan suggested changing the PCI bus scanning order from Descent to
Ascent. I tried this but observed that the PCI bus address for the
on-board SATA controller and my video card are moving when I change
the scan order. No matter what I try the on-board SATA controller
always is detected before the on-board SCSI controller.

Scanpci -v output with BIOS PCI scan set to ascent:

pci bus 0x0001 cardnum 0x05 function 0x00: vendor 0x1095 device 0x3114
Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA
Controller
STATUS 0x02b0 COMMAND 0x0007
CLASS 0x01 0x80 0x00 REVISION 0x02
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x10
BASE0 0x00008c01 addr 0x00008c00 I/O
BASE1 0x00008881 addr 0x00008880 I/O
BASE2 0x00008801 addr 0x00008800 I/O
BASE3 0x00008481 addr 0x00008480 I/O
BASE4 0x00008401 addr 0x00008400 I/O
BASE5 0xfc4ffc00 addr 0xfc4ffc00 MEM
BASEROM 0xfc400000 addr 0xfc400000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x02 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00

pci bus 0x0002 cardnum 0x06 function 0x00: vendor 0x9005 device 0x801d
Adaptec AIC-7902B U320
CardVendor 0x9005 card 0x005e (Adaptec, Card unknown)
STATUS 0x0430 COMMAND 0x0047
CLASS 0x01 0x00 0x00 REVISION 0x10
BIST 0x00 HEADER 0x80 LATENCY 0x40 CACHE 0x10
BASE0 0x0000a001 addr 0x0000a000 I/O
BASE1 0x00000000fc8f6004 addr 0x00000000fc8f6000 MEM 64BIT
BASE3 0x00009801 addr 0x00009800 I/O
BASEROM 0xfc780000 addr 0xfc780000 not-decode-enabled
MAX_LAT 0x19 MIN_GNT 0x28 INT_PIN 0x01 INT_LINE 0x05
BYTE_0 0xc6 BYTE_1 0xe3 BYTE_2 0x00 BYTE_3 0x80

pci bus 0x0002 cardnum 0x06 function 0x01: vendor 0x9005 device 0x801d
Adaptec AIC-7902B U320
CardVendor 0x9005 card 0x005e (Adaptec, Card unknown)
STATUS 0x0430 COMMAND 0x0047
CLASS 0x01 0x00 0x00 REVISION 0x10
BIST 0x00 HEADER 0x80 LATENCY 0x40 CACHE 0x10
BASE0 0x0000a801 addr 0x0000a800 I/O
BASE1 0x00000000fc8fc004 addr 0x00000000fc8fc000 MEM 64BIT
BASE3 0x0000a401 addr 0x0000a400 I/O
BASEROM 0xfc800000 addr 0xfc800000 not-decode-enabled
MAX_LAT 0x19 MIN_GNT 0x28 INT_PIN 0x02 INT_LINE 0x09
BYTE_0 0xc6 BYTE_1 0xe3 BYTE_2 0x00 BYTE_3 0x80

pci bus 0x0004 cardnum 0x03 function 0x00: vendor 0x10de device 0x0322
nVidia Corporation NV34 [GeForce FX 5200]
CardVendor 0x3842 card 0xb309 (eVga.com. Corp., Card unknown)
STATUS 0x02b0 COMMAND 0x0007
CLASS 0x03 0x00 0x00 REVISION 0xa1
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0xfd000000 addr 0xfd000000 MEM
BASE1 0xf0000008 addr 0xf0000000 MEM PREFETCHABLE
BASEROM 0xfeae0000 addr 0xfeae0000 not-decode-enabled
MAX_LAT 0x01 MIN_GNT 0x05 INT_PIN 0x01 INT_LINE 0x00
BYTE_0 0x42 BYTE_1 0x38 BYTE_2 0x09 BYTE_3 0xb3

Scanpci -v output with BIOS PCI scan set to descent:

pci bus 0x0001 cardnum 0x03 function 0x00: vendor 0x10de device 0x0322
nVidia Corporation NV34 [GeForce FX 5200]
CardVendor 0x3842 card 0xb309 (eVga.com. Corp., Card unknown)
STATUS 0x02b0 COMMAND 0x0007
CLASS 0x03 0x00 0x00 REVISION 0xa1
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x00
BASE0 0xfb000000 addr 0xfb000000 MEM
BASE1 0xf0000008 addr 0xf0000000 MEM PREFETCHABLE
BASEROM 0xfc4e0000 addr 0xfc4e0000 not-decode-enabled
MAX_LAT 0x01 MIN_GNT 0x05 INT_PIN 0x01 INT_LINE 0x00
BYTE_0 0x42 BYTE_1 0x38 BYTE_2 0x09 BYTE_3 0xb3

pci bus 0x0002 cardnum 0x06 function 0x00: vendor 0x9005 device 0x801d
Adaptec AIC-7902B U320
CardVendor 0x9005 card 0x005e (Adaptec, Card unknown)
STATUS 0x0430 COMMAND 0x0047
CLASS 0x01 0x00 0x00 REVISION 0x10
BIST 0x00 HEADER 0x80 LATENCY 0x40 CACHE 0x10
BASE0 0x00007801 addr 0x00007800 I/O
BASE1 0x00000000fc8f6004 addr 0x00000000fc8f6000 MEM 64BIT
BASE3 0x00007401 addr 0x00007400 I/O
BASEROM 0xfc780000 addr 0xfc780000 not-decode-enabled
MAX_LAT 0x19 MIN_GNT 0x28 INT_PIN 0x01 INT_LINE 0x09
BYTE_0 0xc6 BYTE_1 0xe3 BYTE_2 0x00 BYTE_3 0x80

pci bus 0x0002 cardnum 0x06 function 0x01: vendor 0x9005 device 0x801d
Adaptec AIC-7902B U320
CardVendor 0x9005 card 0x005e (Adaptec, Card unknown)
STATUS 0x0430 COMMAND 0x0047
CLASS 0x01 0x00 0x00 REVISION 0x10
BIST 0x00 HEADER 0x80 LATENCY 0x40 CACHE 0x10
BASE0 0x00008401 addr 0x00008400 I/O
BASE1 0x00000000fc8fc004 addr 0x00000000fc8fc000 MEM 64BIT
BASE3 0x00008001 addr 0x00008000 I/O
BASEROM 0xfc800000 addr 0xfc800000 not-decode-enabled
MAX_LAT 0x19 MIN_GNT 0x28 INT_PIN 0x02 INT_LINE 0x05
BYTE_0 0xc6 BYTE_1 0xe3 BYTE_2 0x00 BYTE_3 0x80

pci bus 0x0004 cardnum 0x05 function 0x00: vendor 0x1095 device 0x3114
Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA
Controller
STATUS 0x02b0 COMMAND 0x0007
CLASS 0x01 0x80 0x00 REVISION 0x02
BIST 0x00 HEADER 0x00 LATENCY 0x40 CACHE 0x10
BASE0 0x0000bc01 addr 0x0000bc00 I/O
BASE1 0x0000b881 addr 0x0000b880 I/O
BASE2 0x0000b801 addr 0x0000b800 I/O
BASE3 0x0000b481 addr 0x0000b480 I/O
BASE4 0x0000b401 addr 0x0000b400 I/O
BASE5 0xfeaffc00 addr 0xfeaffc00 MEM
BASEROM 0xfea00000 addr 0xfea00000 not-decode-enabled
MAX_LAT 0x00 MIN_GNT 0x00 INT_PIN 0x01 INT_LINE 0x0b
BYTE_0 0x02 BYTE_1 0x00 BYTE_2 0x00 BYTE_3 0x00
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Tyan Thunder K8W S2885 - Can't get Highpoint BIOS and SI SATA BIOS at same time Noozer Tyan 1 08-28-2004 08:24 PM
bios chips, bios updates, bios upgrades, bios info, Tyan recommended biosman Tyan 0 08-26-2004 07:17 AM
Re: Tyan Trinity i875P memory problems after BIOS upgrade Lissy+Peter Tyan 4 04-07-2004 05:00 AM
Problem with Tyan 9600PRO graphics card and ASUS P4B266 motherboard! Damo Asus 2 12-11-2003 09:22 PM
More X$@*&^! problems with TYAN S2080 BIOS. Michael P Gabriel Hardware 2 11-14-2003 01:29 PM


All times are GMT. The time now is 06:53 AM.


Welcome!
Welcome to Motherboard Point
 

Advertisment