Motherboard Forums


Reply
Thread Tools Display Modes

Biostar M7NCD

 
 
Dalgibbard
Guest
Posts: n/a
 
      09-29-2004, 01:33 PM
Does anyone have any reason why my M7NCD mobo is putting my fsb at 200 when
ive got a athlonxp3200? its a 400 fsb board without the 400 fsb option?? i
dont get it lol

Dalgibbard.


 
Reply With Quote
 
 
 
 
Wes Newell
Guest
Posts: n/a
 
      09-29-2004, 03:45 PM
On Wed, 29 Sep 2004 13:33:01 +0000, Dalgibbard wrote:

> Does anyone have any reason why my M7NCD mobo is putting my fsb at 200 when
> ive got a athlonxp3200? its a 400 fsb board without the 400 fsb option?? i
> dont get it lol
>

Because the FSB is supposed to be 200MHz, not 400MHz. See The Real Front
Side Bus in link below.

--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
http://mysite.verizon.net/res0exft/cpu.htm
 
Reply With Quote
 
 
 
 
Krutibas Biswal
Guest
Posts: n/a
 
      09-29-2004, 11:10 PM
I have a BioStar M7NCD and I am running it with AMD 3200+ XP,
ATI Radeon 9250 SE and PC3200 DDR 512MB for two weeks now.
So far no problems.

I also tried to overclock it using the utility

http://www.cpuid.com/clockgen.php

It seemed to work for a while @210 and then crashed. I will
run more expts soon

-KB
 
Reply With Quote
 
Dalgibbard
Guest
Posts: n/a
 
      09-30-2004, 09:37 AM
Yea ive tweaked it about a bit- but the basic level M7NCD (not the pro or
ultra versions) don't allow voltage changes- so stability was an issue for
me too- i managed to get it from 2200mhz to about 2400mhz without voltage
clocking but it wasnt too happy lol
Dalgibbard.

"Krutibas Biswal" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed) om...
> I have a BioStar M7NCD and I am running it with AMD 3200+ XP,
> ATI Radeon 9250 SE and PC3200 DDR 512MB for two weeks now.
> So far no problems.
>
> I also tried to overclock it using the utility
>
> http://www.cpuid.com/clockgen.php
>
> It seemed to work for a while @210 and then crashed. I will
> run more expts soon
>
> -KB



 
Reply With Quote
 
Gareth Tuckwell
Guest
Posts: n/a
 
      09-30-2004, 10:11 AM
To achieve a FSB speed of 400, the clock is set to 200Mhz This is doubled to
get the FSB figure. As in DDR memory - "Double Data Rate", the FSB sends 2
signals for each clock tick, therefore FSB 400 is achieved at 200MHz.


"Dalgibbard" <dalgibbard@*remove*blueyonder.*remove*co.uk> wrote in message
news:hQy6d.118680$(E-Mail Removed) .uk...
> Does anyone have any reason why my M7NCD mobo is putting my fsb at 200
> when
> ive got a athlonxp3200? its a 400 fsb board without the 400 fsb option?? i
> dont get it lol
>
> Dalgibbard.
>
>



 
Reply With Quote
 
Wes Newell
Guest
Posts: n/a
 
      09-30-2004, 04:34 PM
On Thu, 30 Sep 2004 09:37:51 +0000, Dalgibbard wrote:

> Yea ive tweaked it about a bit- but the basic level M7NCD (not the pro or
> ultra versions) don't allow voltage changes- so stability was an issue for
> me too- i managed to get it from 2200mhz to about 2400mhz without voltage
> clocking but it wasnt too happy lol
> Dalgibbard.
>

Using the pinmod would only take 1 wire to get 1.85v, 2 wires for 1.75v,
and with 3 you can get about all you want.

http://www.ocinside.de/go_e.html?/ht...md_pinmod.html

--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
http://mysite.verizon.net/res0exft/cpu.htm
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
dual channel problem with Biostar M7NCD-Ultra Craig Biostar 0 09-23-2004 03:54 PM
Biostar M7NCD versus Abit AN7 Mr. Brian Allen Biostar 1 04-30-2004 04:33 PM
Front audio on Biostar M7NCD pro? Fred Biostar 0 04-05-2004 02:51 PM
Biostar M7NCD Pro, no IDE The Psycho Biostar 1 10-29-2003 05:13 PM
BioStar M7NCD BIOS Settings? Peter van der Goes Biostar 4 10-27-2003 06:30 AM


All times are GMT. The time now is 04:33 AM.


Welcome!
Welcome to Motherboard Point
 

Advertisment