Motherboard Forums


Reply
Thread Tools Display Modes

Biostar M7VIG 400 Problems

 
 
Junior Member
Join Date: Oct 2006
Posts: 1
 
      10-26-2006, 01:46 PM
Hi all...

Recently purchased a new mobo & case/power supply after a power surge took out my Emachine.

Replaced with a Biostar M7VIG 400 & In-win MicroATX case w/ 350 watt power supply.

Going into the machine are 256 megs of RAM (factory ram from an emachine D2346).
AMD Athlon XP 2800+
Hard drives, DVD Burner, etc.

Anyway, according to AMD spec this processor is supposed to be set to a 166mhz FSB. There are jumpers on the mobo to set to either a 100, 133, or 166 setting. From the factory it was set at 100 and it booted up fine. But when changed to 166, I get nothing. Power spins up, but no POST or BIOS screen.

Is there something I'm missing here or am I going to have to deal with a system dumbed down to 100mhz FSB??

Thanks in advance...
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
xp 1700 on M7vig mobo, how to overclock via multiplier? JT AMD Overclocking 1 12-01-2004 09:06 AM
Biostar M7VIG accept an AMD Sempron 2800+? Mobo Newbie Biostar 2 11-23-2004 09:24 AM
Semi-OT: No video with BIOSTAR M7NCG 400 after installing driver... Cory Dunkle Biostar 3 10-29-2004 01:00 AM
Biostar M7VIT Pro problems John Voznak Biostar 0 11-05-2003 11:06 AM
BIOSTAR M7VIG PRO/Xp1800 Gunner Biostar 5 09-25-2003 07:27 PM


All times are GMT. The time now is 08:04 AM.


Welcome!
Welcome to Motherboard Point
 

Advertisment