celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?

celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?

Or can I expect problems running this celeron on 533 Bus
Did anyone buy this and had problems with IT ?

Or is the speed 2.4x133 =3.20Ghz too high ans should I put
processor on 2.0x133=2.6Ghz

Any experience with it ?

some folks are hitting ~3.2GHz with the P4 celerons, check out the database
at www.overclockers.com ... but of course this is no guarantee that yours
will


"chackie" <> wrote in message
news:...
> celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?
>
> Or can I expect problems running this celeron on 533 Bus
> Did anyone buy this and had problems with IT ?
>
> Or is the speed 2.4x133 =3.20Ghz too high ans should I put
> processor on 2.0x133=2.6Ghz
>
> Any experience with it ?

I'd get the 2.2.

22x133 is almost 3Ghz at 133 FSB - you should get 3Ghz safely


"chackie" <> wrote in message
news:...
> celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?
>
> Or can I expect problems running this celeron on 533 Bus
> Did anyone buy this and had problems with IT ?
>
> Or is the speed 2.4x133 =3.20Ghz too high ans should I put
> processor on 2.0x133=2.6Ghz
>
> Any experience with it ?

chackie wrote:
> celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?
>
> Or can I expect problems running this celeron on 533 Bus
> Did anyone buy this and had problems with IT ?
>
> Or is the speed 2.4x133 =3.20Ghz too high ans should I put
> processor on 2.0x133=2.6Ghz
>
> Any experience with it ?

Celerons are highly overclockable... But still slow buggers.. I've seen a
test where a Celeron 2.0, overclocked to 3.0, looses in some tests from a P4
1.8...

My advice; try for a cheap low clocked P4, or get one second hand. In the
Netherlands, i can really recommend the second hand shopping... I have
purchased an Intel 875 board with a P4 2.6C for only 225 euro's (about 230
dollars)

Thomas

On Wed, 10 Sep 2003 12:46:33 +0100, "Nick Hogg" <>
wrote:

>some folks are hitting ~3.2GHz with the P4 celerons, check out the database
>at www.overclockers.com ... but of course this is no guarantee that yours
>will
thanks, already reading and looking for more

>
>
>"chackie" <> wrote in message
>news:.. .
>> celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?
>>
>> Or can I expect problems running this celeron on 533 Bus
>> Did anyone buy this and had problems with IT ?
>>
>> Or is the speed 2.4x133 =3.20Ghz too high ans should I put
>> processor on 2.0x133=2.6Ghz
>>
>> Any experience with it ?


>

On Wed, 10 Sep 2003 17:44:42 +0200, "Thomas"
<> wrote:

>chackie wrote:
>> celeron 2.0 or 2.4 100Mhz bus putting on 533Mhz bus possible ?
>>
>> Or can I expect problems running this celeron on 533 Bus
>> Did anyone buy this and had problems with IT ?
>>
>> Or is the speed 2.4x133 =3.20Ghz too high ans should I put
>> processor on 2.0x133=2.6Ghz
>>
>> Any experience with it ?
>
>Celerons are highly overclockable... But still slow buggers.. I've seen a
>test where a Celeron 2.0, overclocked to 3.0, looses in some tests from a P4
>1.8...
>
>My advice; try for a cheap low clocked P4, or get one second hand. In the
>Netherlands, i can really recommend the second hand shopping... I have
>purchased an Intel 875 board with a P4 2.6C for only 225 euro's (about 230
>dollars)
>
>Thomas

thats cheap, but a p4 is just out, second hand looks not possible,

waar heb je dat 2e hands setje gekocht ? marktplaats ofzo
>

chackie wrote:
>> My advice; try for a cheap low clocked P4, or get one second hand.
>> In the Netherlands, i can really recommend the second hand
>> shopping... I have purchased an Intel 875 board with a P4 2.6C for
>> only 225 euro's (about 230 dollars)
>
> thats cheap, but a p4 is just out, second hand looks not possible,
>
> waar heb je dat 2e hands setje gekocht ? marktplaats ofzo

Processor at marktplaats, board in www.tweakers.net

Thomas.