COMPAQ LTE Lite 4/33C - Display is dead?

Hi all!

ok, this is an old machine from 1993. Hope that someone has a hint for
this problem: I have a COMPAQ LTE Lite 4/33C and it looks like new. I
had it stored in its original package in a room for more than 2 years.
it worked perfectly well before and it was not touched during those 2
years. Now, i switched it on..and everything looks fine but the
display stays DARK! The hard disk is fine and spinning but nothing
shows upt on the display. What could have caused that?? How can i fix
it? As i said the machine was not touched for more than 2 years and it
worked perfectly before!

Thanks,

lactose

Lactose wrote:
> Hi all!
>
> ok, this is an old machine from 1993. Hope that someone has a hint for
> this problem: I have a COMPAQ LTE Lite 4/33C and it looks like new. I
> had it stored in its original package in a room for more than 2 years.
> it worked perfectly well before and it was not touched during those 2
> years. Now, i switched it on..and everything looks fine but the
> display stays DARK! The hard disk is fine and spinning but nothing
> shows upt on the display. What could have caused that?? How can i fix
> it? As i said the machine was not touched for more than 2 years and it
> worked perfectly before!
>
Try it with an external display, if that works, try shining a bright
torch on the display. If you can see a very dark, faint display, then
it's likely to be the inverter or the cold cathode flourescent tubes
that have failed, or the flexible connection from the lower part to the
display panel.

http://www.trademoon.com/SearchResul...te%20lite%2033

Shows a list of some parts still available for that machine. Not
recommending them, they just came up first on Google.

--
Tciao for Now!

John.

On 22 Okt., 05:01, John Williamson <johnwilliam...@btinternet.com>
wrote:
> Lactose wrote:
> > Hi all!
>
> > ok, this is an old machine from 1993. Hope that someone has a hint for
> > this problem: I have a COMPAQ LTE Lite 4/33C and it looks like new. I
> > had it stored in its original package in a room for more than 2 years.
> > it worked perfectly well before and it was not touched during those 2
> > years. Now, i switched it on..and everything looks fine but the
> > display stays DARK! The hard disk is fine and spinning *but nothing
> > shows upt on the display. What could have caused that?? How can i fix
> > it? As i said the machine was not touched for more than 2 years and it
> > worked perfectly before!
>
> Try it with an external display, if that works, try shining a bright
> torch on the display. If you can see a very dark, faint display, then
> it's likely to be the inverter or the cold cathode flourescent tubes
> that have failed, or the flexible connection from the lower part to the
> display panel.
>
> http://www.trademoon.com/SearchResul...te%20lite%2033
>
> Shows a list of some parts still available for that machine. Not
> recommending them, they just came up first on Google.
>
> --
> Tciao for Now!
>
> John.

My monitor doesnt fit into the monitor plugon the compaq laptop. seems
an old system. the connector i have isn from a viewsonic 19" monitor
and has one pin more that the lte lte plug has...so i cant try it now

On 22 Okt., 03:33, "HH" <H...@nowhere.net> wrote:
> Either the dispay itself, the video chip on the motherboard or the backlight
> is dead. *Finding parts for any of them is going to be next to impossible.
> Might try Craig's List or eBay and see if another is out there, but it's
> unlikely. *Time for the old warhorse to be retired permanently.
>
> HH
>
> "Lactose" <europa....@gmail.com> wrote in message
>
> news:15ae26d5-2560-4ad9-b6f0-...
>
> > Hi all!
>
> > ok, this is an old machine from 1993. Hope that someone has a hint for
> > this problem: I have a COMPAQ LTE Lite 4/33C and it looks like new. I
> > had it stored in its original package in a room for more than 2 years.
> > it worked perfectly well before and it was not touched during those 2
> > years. Now, i switched it on..and everything looks fine but the
> > display stays DARK! The hard disk is fine and spinning *but nothing
> > shows upt on the display. What could have caused that?? How can i fix
> > it? As i said the machine was not touched for more than 2 years and it
> > worked perfectly before!
>
> > Thanks,
>
> > lactose

thanks, hh

in fact it is still very easy to get parts. a few bucks and u can buy
a second working unit on ebay and use the parts of it. can this be
fixed? i remember that when i opened the packagage it smells
humid...so i believe that humidity caused this. i will have to open
it..maybe it can be fixed..