Emuzed TVT3 Dual TV Tuner

Does anyone know if drivers for the Emuzed TVT3 Dual TV Tuner (Angel MPEG
Device) are going to be available for Vista?

Thanks

"Darrel Dobbs" <> wrote in message
news:eqdljb$gc9$...
> Does anyone know if drivers for the Emuzed TVT3 Dual TV Tuner (Angel MPEG
> Device) are going to be available for Vista?
>
> Thanks

According to this page:

http://www.lumanate.com/aspx/sptangelpci.aspx

they are included with Vista.

The Card shows in my device manager twice as Angel MPEG Device, just like it
is suppose to... but Windows Media Center says "Tuner Not Found; The Tv
Signal cannot be configured because no tuner hardware was detected. Please
ensure your hardware is corretly installed."
Then Vista looks for a solution to the problem but doesn't ever find one.
Has anyone else been able to get the tuner to work in Vista? Any help would
be appreciated.

Thanks,
Darrel Dobbs

"Tom Scales" <> wrote in message
news:45ca5ca4$0$25923$...
>
> "Darrel Dobbs" <> wrote in message
> news:eqdljb$gc9$...
>> Does anyone know if drivers for the Emuzed TVT3 Dual TV Tuner (Angel MPEG
>> Device) are going to be available for Vista?
>>
>> Thanks
>
> According to this page:
>
> http://www.lumanate.com/aspx/sptangelpci.aspx
>
> they are included with Vista.
>

Darrel Dobbs wrote:
> The Card shows in my device manager twice as Angel MPEG Device, just
> like it is suppose to... but Windows Media Center says "Tuner Not Found;
> The Tv Signal cannot be configured because no tuner hardware was
> detected. Please ensure your hardware is corretly installed."
> Then Vista looks for a solution to the problem but doesn't ever find
> one. Has anyone else been able to get the tuner to work in Vista? Any
> help would be appreciated.

With Vista having *just* been released, you might have to wait a while
for some feedback.

--
Notan

Did it work before you installed VISTA? Did you run the
Vista upgrade advisor program?

You might use the Device Manager to remove all listed
references, then re-install the card.



"Darrel Dobbs" <> wrote in message
news:eqdnmn$ijm$...
| The Card shows in my device manager twice as Angel MPEG
Device, just like it
| is suppose to... but Windows Media Center says "Tuner Not
Found; The Tv
| Signal cannot be configured because no tuner hardware was
detected. Please
| ensure your hardware is corretly installed."
| Then Vista looks for a solution to the problem but doesn't
ever find one.
| Has anyone else been able to get the tuner to work in
Vista? Any help would
| be appreciated.
|
| Thanks,
| Darrel Dobbs
|
| "Tom Scales" <> wrote in message
| news:45ca5ca4$0$25923$...
| >
| > "Darrel Dobbs" <> wrote in message
| > news:eqdljb$gc9$...
| >> Does anyone know if drivers for the Emuzed TVT3 Dual TV
Tuner (Angel MPEG
| >> Device) are going to be available for Vista?
| >>
| >> Thanks
| >
| > According to this page:
| >
| > http://www.lumanate.com/aspx/sptangelpci.aspx
| >
| > they are included with Vista.
| >
|

It worked, the upgrade advisor program said it should work in Vista. I may
try to uninstall and reinstall

"Jim Macklin" <p51mustang[threeX12]@xxxhotmail.calm> wrote in message
news1uyh.47747$...
> Did it work before you installed VISTA? Did you run the
> Vista upgrade advisor program?
>
> You might use the Device Manager to remove all listed
> references, then re-install the card.
>
>
>
> "Darrel Dobbs" <> wrote in message
> news:eqdnmn$ijm$...
> | The Card shows in my device manager twice as Angel MPEG
> Device, just like it
> | is suppose to... but Windows Media Center says "Tuner Not
> Found; The Tv
> | Signal cannot be configured because no tuner hardware was
> detected. Please
> | ensure your hardware is corretly installed."
> | Then Vista looks for a solution to the problem but doesn't
> ever find one.
> | Has anyone else been able to get the tuner to work in
> Vista? Any help would
> | be appreciated.
> |
> | Thanks,
> | Darrel Dobbs
> |
> | "Tom Scales" <> wrote in message
> | news:45ca5ca4$0$25923$...
> | >
> | > "Darrel Dobbs" <> wrote in message
> | > news:eqdljb$gc9$...
> | >> Does anyone know if drivers for the Emuzed TVT3 Dual TV
> Tuner (Angel MPEG
> | >> Device) are going to be available for Vista?
> | >>
> | >> Thanks
> | >
> | > According to this page:
> | >
> | > http://www.lumanate.com/aspx/sptangelpci.aspx
> | >
> | > they are included with Vista.
> | >
> |
>
>

I have had the same problem with my TVT3 in Vista. I tried uninstalling and reinstalling without success. Have you had better luck?

I uninstalled and then reinstalled and still not working.

"Darrel Dobbs" <> wrote in message
news:eqe14k$sap$...
> It worked, the upgrade advisor program said it should work in Vista. I
> may try to uninstall and reinstall
>
> "Jim Macklin" <p51mustang[threeX12]@xxxhotmail.calm> wrote in message
> news1uyh.47747$...
>> Did it work before you installed VISTA? Did you run the
>> Vista upgrade advisor program?
>>
>> You might use the Device Manager to remove all listed
>> references, then re-install the card.
>>
>>
>>
>> "Darrel Dobbs" <> wrote in message
>> news:eqdnmn$ijm$...
>> | The Card shows in my device manager twice as Angel MPEG
>> Device, just like it
>> | is suppose to... but Windows Media Center says "Tuner Not
>> Found; The Tv
>> | Signal cannot be configured because no tuner hardware was
>> detected. Please
>> | ensure your hardware is corretly installed."
>> | Then Vista looks for a solution to the problem but doesn't
>> ever find one.
>> | Has anyone else been able to get the tuner to work in
>> Vista? Any help would
>> | be appreciated.
>> |
>> | Thanks,
>> | Darrel Dobbs
>> |
>> | "Tom Scales" <> wrote in message
>> | news:45ca5ca4$0$25923$...
>> | >
>> | > "Darrel Dobbs" <> wrote in message
>> | > news:eqdljb$gc9$...
>> | >> Does anyone know if drivers for the Emuzed TVT3 Dual TV
>> Tuner (Angel MPEG
>> | >> Device) are going to be available for Vista?
>> | >>
>> | >> Thanks
>> | >
>> | > According to this page:
>> | >
>> | > http://www.lumanate.com/aspx/sptangelpci.aspx
>> | >
>> | > they are included with Vista.
>> | >
>> |
>>
>>
>