Motherboard Forums


Reply
Thread Tools Display Modes

Epox 8RDA3+Pro FSB issue

 
 
joeybrfld
Guest
Posts: n/a
 
      03-04-2007, 08:52 PM

I have an Epox 8rda3+Pro installed on my pc with an Athlon XP 3200+ CPU
I have built the same system for my partner, but when I go into th
BIOS to update the FSB to 200 so that it will recognize the CPU a
3200+ the board shuts down the whole system and will not boot when
save the BIOS. I reset the CMOS and then tried again with 133/166/20
settings as well as used Default Optimum settings. Same effect. Am
missing something? Why is mine working great but not the other PC

--
joeybrfl
-----------------------------------------------------------------------
joeybrfld's Profile: http://www.futurehardware.in/member.php?userid=104
View this thread: http://www.futurehardware.in/showthread.php?t=57595

Future Hardware - http://www.futurehardware.i

 
Reply With Quote
 
 
 
 
dave
Guest
Posts: n/a
 
      03-05-2007, 04:49 AM
Do they have the same version bios?

DaveL


"joeybrfld" <(E-Mail Removed)> wrote in message
news:(E-Mail Removed)...
>
> I have an Epox 8rda3+Pro installed on my pc with an Athlon XP 3200+ CPU.
> I have built the same system for my partner, but when I go into the
> BIOS to update the FSB to 200 so that it will recognize the CPU as
> 3200+ the board shuts down the whole system and will not boot when I
> save the BIOS. I reset the CMOS and then tried again with 133/166/200
> settings as well as used Default Optimum settings. Same effect. Am I
> missing something? Why is mine working great but not the other PC?
>
>
> --
> joeybrfld
> ------------------------------------------------------------------------
> joeybrfld's Profile: http://www.futurehardware.in/member.php?userid=1043
> View this thread: http://www.futurehardware.in/showthread.php?t=575956
>
> Future Hardware - http://www.futurehardware.in
>


 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Epox 9NPAJ SLI IDE controller issue Philburg Epox 1 02-08-2006 12:14 AM
Epox 8RDA+ died after 14 months bad capacitors for Epox-Tech Michel Weijts Epox 4 09-08-2004 06:21 PM
Re: 166 FSB on 8KHA+ German Epox sites says 2800+ is possible Epox 0 07-13-2003 03:28 PM
KG7 - FSB @ 133MHz = Unstable / FSB @ 100MHz = Stable - Help! Timmy The Turtle Abit 0 07-08-2003 07:38 PM
Re: 166 FSB on 8KHA+ German Epox sites says 2800+ is possible Nitza666 Epox 0 07-02-2003 01:09 AM


All times are GMT. The time now is 01:09 PM.


Welcome!
Welcome to Motherboard Point
 

Advertisment