Motherboard Forums


Reply
Thread Tools Display Modes

GA-MA790FX-DS5 Memory timing

 
 
jss27560
Guest
Posts: n/a
 
      07-08-2008, 05:23 PM
I am trying to make sure that my memory is configuired correctly. From
what I can tell the memory is running at 736 instead of the 800 that
it's supose to be and the timing is 5-4-4-12 and it should be
5-5-5-15 . What is the easiest way to correct it.

Also is my CPU running at the correct speed?

my machine is a Gigybyte GA-MA790FX-DS5, AMD 64 X2 4200+ Brisbane
2.2GHz, OCZ SLI-Ready Edition 2GB (2 x 1GB) 240-Pin DDR2 SDRAM DDR2
1066, 2x POWERCOLOR 26PRO 512M DDR2 Radeon HD 2600PRO 512MB Crossfire

Memory SPD
------------------------------------------------------------------------------

DIMM #1

General
Memory type DDR2
Module format Regular UDIMM
Manufacturer (ID) OCZ (7F7F7F7FB0000000)
Size 1024 MBytes
Max bandwidth PC2-5300 (333 MHz)
Part number OCZ2N1066SR1G
Serial number FFFFFFFF
Manufacturing date Week 165/Year 165

Attributes
Number of banks 2
Data width 64 bits
Correction None
Nominal Voltage 1.80 Volts
EPP yes (1 profiles)
XMP no

Timings table
Frequency (MHz) 270 270 333
CAS# 3.0 4.0 5.0
RAS# to CAS# delay 4 4 5
RAS# Precharge 4 4 5
TRAS 13 13 15
TRC 15 15 19

EPP profile 1 (full)
Voltage level 2.100 Volts
Address Command Rate 2T
Cycle time 1.875 ns (533.3 MHz)
tCL 5.0 clocks
tRCD 5 clocks (9.25 ns)
tRP 5 clocks (9.25 ns)
tRAS 15 clocks (28.00 ns)
tRC 22 clocks (41.00 ns)
tWR 6 clocks (11.25 ns)


Processors Information
------------------------------------------------------------------------------------

Processor 1 (ID = 0)
Number of cores 2 (max 2)
Number of threads 2 (max 2)
Name AMD Athlon 64 X2 4200+
Codename Brisbane
Specification AMD Athlon(tm) 64 X2 Dual Core Processor 4200+
Package Socket AM2 (940)
CPUID F.B.2
Extended CPUID F.6B
Brand ID 4
Core Stepping BH-G2
Technology 65 nm
Core Speed 2210.1 MHz (11.0 x 200.9 MHz)
HT Link speed 1004.6 MHz
Stock frequency 2200 MHz
Instructions sets MMX (+), 3DNow! (+), SSE, SSE2, SSE3, x86-64
L1 Data cache 2 x 64 KBytes, 2-way set associative, 64-byte line size
L1 Instruction cache 2 x 64 KBytes, 2-way set associative, 64-byte
line size
L2 cache 2 x 512 KBytes, 16-way set associative, 64-byte line size
FID/VID Control yes
max FID 11.0x
max VID 1.300 V
Features XD, VT
K8 Thermal sensor yes
K8 Revision ID 6.0
Attached device PCI device at bus 0, device 24, function 0
Attached device PCI device at bus 0, device 24, function 1
Attached device PCI device at bus 0, device 24, function 2
Attached device PCI device at bus 0, device 24, function 3



[img]http://
valid.x86-secret.com/cache/banner/386342.png[/img]

 
Reply With Quote
 
 
 
 
Junior Member
Join Date: Jul 2008
Posts: 20
 
      07-08-2008, 05:55 PM
Boot sequence is "1=CDROM" "2=HDD"
XP CD is inserted
"Enabled" BIOS' "OnChip SATA Controller"-option
If I turn on "AHCI" as "OnChip SATA Type" boot process stops while
"Verifying DMI Pool Data...."
If I turn on "Native IDE" as "Type" boot process finishes and XP
starts installation stating there were two disks ("drive 0 id 0 bus 0
and drive 0 id 1 bus 0") each with 131.070 MB

What is this all about?
Why does boot process stop when in AHCI mode? It might be necessary
to install os-drivers to fully use AHCI, but that should not work if
AHCI is turned off by BIOS (from my point of view or did I understand
something wrong?)
Why does XP report 131.070 MB for the drives?
 
Reply With Quote
 
 
 
 
Junior Member
Join Date: Jul 2008
Posts: 3
 
      07-29-2008, 12:06 PM
Ohh.. I used the same board, but i have not encounter that problem eversince. I also don't have any idea how to do the timing.
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
BH-5 Memory Timing Lankshire Abit 4 05-01-2004 04:53 AM
P4C800 Deluxe memory timing settings <---INFO Noozer Asus 1 02-05-2004 10:34 AM
Memory timing advise for A7N8X deluxe me@here.com Asus 2 07-14-2003 11:03 PM
Need agressive memory timing advise please me@here.com Asus 1 06-26-2003 07:17 PM
A7N8X deluxe memory timing settings help needed please me@here.com Asus 2 06-25-2003 04:39 PM


All times are GMT. The time now is 11:19 AM.


Welcome!
Welcome to Motherboard Point
 

Advertisment