In article <> ,
Peter Huebner <> wrote:
> In article <>,
> says...
> >
> > Abit very much still worth having. A lot depends how much you want to spend
> > and how far you want to overclock, but the AB9 QuadGT is arguably the best
> > performing 965 based design on the planet. The IP35 Pro is better than the
> > QuadGT in some ways, worse in others. On balance little to choose between
> > them. The AW9D series are established and stable.
> >
> > The forthcoming IX38-Max and IX38-QuadGT should be killer, the same board
> > but one with DDR3 and the other with DDR2 sockets.
>
> Depends on what you want in features, really. I'm currently also looking at
> upgrading my NF7S to some thing a little .... gruntier. It's my 3rd generation
> of Abit boards. But I think I will abandon Abit this time around. I want a
> board with _2_ PATA channels. Which precludes the 965 chipset and leads me to
> the NVidia650i.
> I also want a serial port at the back of my box, thank you very much, since I
> don't want to throw away a lot of good expensive hardware; be it UPS, be it
> external dialup modem for emergencies or testing ...
I have an external modem and a UPS (both of which use serial) to hook up
to a M2N-E SLi (which has one serial port). My previous motherboard had
two serial ports. I have a USB-serial converter, but it does something
which causes the UPS to power off whenever Linux inits the USB ports
during the boot sequence. This is obviously unacceptable. So I
switched them -- modem on the USB-serial thingy, UPS on the real serial
port. Works fine that way.
--
-eben
P
http://royalty.mine.nu:81
Are you confident that you appear to be professional in your electronic
communication? Consider this: A: No
Q: Can I top post? from