HP All-In-One Laserjet 3390 Printer - No IP Address - DHCP

Below find the solution to my previous posting.

The symptoms were as follows:

My HP 3390 printer stopped working as a network printer but continued
working via USB port. According to the printers network report, the
printer had no IP address and instead reported IP_ADDRESS=Configuring.
Since that time numerous printing jobs have failed (as reported
through XP print utility) and had to be restarted.

The following cleared up the IP address issue and I am no longer
getting print errors.

Thanks to the person who sent me the solution:

<BEGIN>

This should fix your problem

This is not the factory default from the menu but one step
beyond......

Try performing an NVRAM reset. An NVRAM initialization will
return the following device settings to the factory-set defaults:

All menu settings, including the fax header and company name
Fax numbers and names that are associated with one-touch keys and
speed-dial codes
Additionally, all faxes stored in memory are cleared.

To perform a NVRAM initialization

1. Turn off the device.
2. Simultaneously press and hold the Enter button and the * button,
and then turn on the device.
3. Wait until the message Permanent storage init. appears, and then
release the Enter and * buttons.

Printer is working again and tcpip settings are active again.

Good luck!
<end>

Hello
You can find wholesale laser printers and drop shippers on online web directories..!!

frenchsuppliers.com]
diytoolsdirectory.com]
usawholesalers.com]
francewholesalers.com]