HP XW8000 dual 2.4 Xeons - U1 power supply solutions - Please

Hello,

I was wondering if anyone could please help me out in this problem my cousin
and I are having. we have a HP xw8000 motherboard, but we put this board
into a U1 rack chassis.. the original HP power supply that came with this
board does work but the U1 power supply we bought for this board.. 1U
EPS Sparkle FSP460-601U.. well it did not work..after hooking it up, turned
it on and got nothing but an error beep that the HP manual describes as:
"Power supply is in protected mode, or system is hung in an undetermined
on/off state."
http://h200005.www2.hp.com/bc/docs/s...9/lpv38919.pdf

Power supply info: http://thcclan.kicks-ass.net/files/voltages.xls

I need to know what power supply will work with this system board.. must be
a U1 power supply to fit in the chassis. or is this a motherboard
grounding issue.

PS.. My cousin has more INFO about this issue with other responses at this
website Forums:
http://www.lanwar.com/forumsh/forum/...TOPIC_ID=11854

any help will be appreciated GREATLY.
Please email at

thank you
Dave

Try the mobo outside 1U with RAM/Graphic/Floppy and PSU. I use a ground pad
but a wood table would do. Let me know, as I did not have time to check spec
on mobo/PSU. Some boards from tier-1 company has proprietary requirements.
"Grimzella" <> wrote in message
newsKajc.41772$_L6.2533725@attbi_s53...
> Hello,
>
> I was wondering if anyone could please help me out in this problem my
cousin
> and I are having. we have a HP xw8000 motherboard, but we put this
board
> into a U1 rack chassis.. the original HP power supply that came with this
> board does work but the U1 power supply we bought for this board.. 1U
> EPS Sparkle FSP460-601U.. well it did not work..after hooking it up,
turned
> it on and got nothing but an error beep that the HP manual describes as:
> "Power supply is in protected mode, or system is hung in an undetermined
> on/off state."
>
http://h200005.www2.hp.com/bc/docs/s...9/lpv38919.pdf
>
> Power supply info: http://thcclan.kicks-ass.net/files/voltages.xls
>
> I need to know what power supply will work with this system board.. must
be
> a U1 power supply to fit in the chassis. or is this a motherboard
> grounding issue.
>
> PS.. My cousin has more INFO about this issue with other responses at this
> website Forums:
> http://www.lanwar.com/forumsh/forum/...TOPIC_ID=11854
>
> any help will be appreciated GREATLY.
> Please email at
>
> thank you
> Dave
>
>
>