HPpsc 2210 .. Problems !

HI..
Printer is almost a month old and sure have had some problems. 1st.
Does anyone's printer make a LOT of noise ? (enough to make one jump
when it starts printing) and it really Shakes so hard I am going to that
I'm going to have to put it on a stand alone table .
and .. I have tried to print a jpg using "BEST" as the printing mode.
ISn't that supposed to be the very best copy ? I tried it 2 times and
the jpg printed in color but you could hardly see it because it
printed a dark gray color over it . I didn't select "Grayscale"..I
select the Color Cartridge and Best as printing mode. This has happened
both times I've selected "Best" ..
thank you much

i agree with you, this psc2210 is shaking my table
when it starts & when it prints,
but except for the bug i describe in a msg, hereunder, it produces
good photos


<> a écrit dans le message de
news:...
> HI..
> Printer is almost a month old and sure have had some problems. 1st.
> Does anyone's printer make a LOT of noise ? (enough to make one jump
> when it starts printing) and it really Shakes so hard I am going to that
> I'm going to have to put it on a stand alone table .
> and .. I have tried to print a jpg using "BEST" as the printing mode.
> ISn't that supposed to be the very best copy ? I tried it 2 times and
> the jpg printed in color but you could hardly see it because it
> printed a dark gray color over it . I didn't select "Grayscale"..I
> select the Color Cartridge and Best as printing mode. This has happened
> both times I've selected "Best" ..
> thank you much
>

In article <>,
says...
> HI..
> Printer is almost a month old and sure have had some problems. 1st.
> Does anyone's printer make a LOT of noise ? (enough to make one jump
> when it starts printing) and it really Shakes so hard I am going to that
> I'm going to have to put it on a stand alone table .
> and .. I have tried to print a jpg using "BEST" as the printing mode.
> ISn't that supposed to be the very best copy ? I tried it 2 times and
> the jpg printed in color but you could hardly see it because it
> printed a dark gray color over it . I didn't select "Grayscale"..I
> select the Color Cartridge and Best as printing mode. This has happened
> both times I've selected "Best" ..
> thank you much
>
>
I have the HP PSC 750XI and it is quiet and no shaking at all. Maybe
yours is defective and should be exchanged.
--
Cheers!

Jan

<> wrote in message news:...

> Printer is almost a month old and sure have had some problems. 1st.
> Does anyone's printer make a LOT of noise ? (enough to make one jump
> when it starts printing) and it really Shakes so hard I am going to that
> I'm going to have to put it on a stand alone table .

I use a PSC 2210 both at home and at work and do not have any issues with noise
or vibration. You should call HP support tool-free at 1-800-HPINVENT
(474-6836) for warranty service.

> and .. I have tried to print a jpg using "BEST" as the printing mode.
> ISn't that supposed to be the very best copy ? I tried it 2 times and
> the jpg printed in color but you could hardly see it because it
> printed a dark gray color over it .

If you are using the HP Printing and Imaging Editor version software you should
check the following for a workaround:
http://h20015.www2.hp.com/en/documen...Name=c00001927

I believe there is a new driver which also addresses this issue, but it is a
rather large download:
http://h20015.www2.hp.com/en/softwar..._lang=en&cc=us

Regards,
Bob Headrick, not speaking for my employer HP

Hi Have a PSC 2210 (the model up) and it doesn't shake or print incorrectly.

Sounds like you have a faulty one there.

Why don't you change it for a 2210 much better at printing and scanning,
plus you have the added fax option.


Pete



"Bob Headrick" <> wrote in message
news:...
>
> <> wrote in message
news:...
>
> > Printer is almost a month old and sure have had some problems. 1st.
> > Does anyone's printer make a LOT of noise ? (enough to make one jump
> > when it starts printing) and it really Shakes so hard I am going to that
> > I'm going to have to put it on a stand alone table .
>
> I use a PSC 2210 both at home and at work and do not have any issues with
noise
> or vibration. You should call HP support tool-free at 1-800-HPINVENT
> (474-6836) for warranty service.
>
> > and .. I have tried to print a jpg using "BEST" as the printing mode.
> > ISn't that supposed to be the very best copy ? I tried it 2 times and
> > the jpg printed in color but you could hardly see it because it
> > printed a dark gray color over it .
>
> If you are using the HP Printing and Imaging Editor version software you
should
> check the following for a workaround:
> http://h20015.www2.hp.com/en/documen...Name=c00001927
>
> I believe there is a new driver which also addresses this issue, but it is
a
> rather large download:
>
http://h20015.www2.hp.com/en/softwar...type=software&
prodId=hppsc2210a79499&sw_lang=en&cc=us
>
> Regards,
> Bob Headrick, not speaking for my employer HP
>
>
>
>

opps how stupid am I lol
Thought you had a 2110 ,thats the model bellow the 2210

I would still take it back for a exchange.


Pete


<> wrote in message
news:...
> HI..
> Printer is almost a month old and sure have had some problems. 1st.
> Does anyone's printer make a LOT of noise ? (enough to make one jump
> when it starts printing) and it really Shakes so hard I am going to that
> I'm going to have to put it on a stand alone table .
> and .. I have tried to print a jpg using "BEST" as the printing mode.
> ISn't that supposed to be the very best copy ? I tried it 2 times and
> the jpg printed in color but you could hardly see it because it
> printed a dark gray color over it . I didn't select "Grayscale"..I
> select the Color Cartridge and Best as printing mode. This has happened
> both times I've selected "Best" ..
> thank you much
>