K8WE Motherboard (S2895) and LSI onboard SCSI Drivers in Win x64

I didn't like the fact that my onboard LSI SCSI was using a Microsoft
driver from 2002, so I went looking for a new driver. I found some LSI
drivers for their *own* SCSI cards, and LSI had an x64 version. I
tried them, and my board soaked them up. However, I haven't tried any
SCSI devices yet.

Has anyone had any experience using the LSI drivers directly with the
onboard SCSI chip in Win x64?

Thank you!

Jim

Hi again Jim,

try www.k8we.com
look under file section

My powersupply just packed it in :-) so I can't tell you, which was an
Enhance 650W. Which Iwill be replacing with a Zippy 800W (@ 3x the price of
the first one!
though it could have to do with that it is warming up here down under
(summer is on its way!)

I hope you find it,

Henrik

PS: will check as soon as I get my box back - but I had no problems using
the LSI with 5 scsi disks

Henrik,

Thanks for the tip! I still don't have any SCSI devices attached yet,
but I plan to get a SCSI AIT tape drive.

Jim