KN1 sli lite

Is there a known problem when using pide and sata hard disks in a system.

I had a problem in that windows xp is installed on drive c (piade) and data
resides on drive d (sata). With sata connected the computer would take three
or four attempts to boot (windows would load then restart once the desktop
had appeared), and would also restart every 30 minutes or so, if I was
lucky. I changed memory, power supplies, and chips, originally a 3700+ sna
diago core, then a x2 3800+ dual manchester core, same problem with both
chips. Out of desperation I disconected the sata draive and everything seems
fine!

Any help would be appreciated.

David Hester wrote:
> Is there a known problem when using pide and sata hard disks in a system.
>
> I had a problem in that windows xp is installed on drive c (piade) and data
> resides on drive d (sata). With sata connected the computer would take three
> or four attempts to boot (windows would load then restart once the desktop
> had appeared), and would also restart every 30 minutes or so, if I was
> lucky. I changed memory, power supplies, and chips, originally a 3700+ sna
> diago core, then a x2 3800+ dual manchester core, same problem with both
> chips. Out of desperation I disconected the sata draive and everything seems
> fine!
>
> Any help would be appreciated.
>
>
>
unfortunatley conflict between sata and pide not the problem, back to
the drawing board!

After much eresearch it would apper to be nVidia Network Access Manager
being the problem.

This problem also exists on the previous mb I waas using ASUS A8N SLI if any
of you are interested, which from the lack of posts I don't think anybody is
out there.

"David Hester" <> wrote in message
news:...
> David Hester wrote:
>> Is there a known problem when using pide and sata hard disks in a system.
>>
>> I had a problem in that windows xp is installed on drive c (piade) and
>> data resides on drive d (sata). With sata connected the computer would
>> take three or four attempts to boot (windows would load then restart once
>> the desktop had appeared), and would also restart every 30 minutes or so,
>> if I was lucky. I changed memory, power supplies, and chips, originally a
>> 3700+ sna diago core, then a x2 3800+ dual manchester core, same problem
>> with both chips. Out of desperation I disconected the sata draive and
>> everything seems fine!
>>
>> Any help would be appreciated.
>>
>>
>>
> unfortunatley conflict between sata and pide not the problem, back to the
> drawing board!

Hi,
I just ordered the KN1 Extreme without SLI, because it´s of no use for
me. Still waiting for it.
I also heard that there is a lot of trouble regarding the network
manager i.e. active armor feature.
Allthough I am looking forward to receiving this board!
R