Matrox Dual-Head-To-Go and TabletPC

04-28-2006, 02:08 PM

Has anyone got any experience with this item?

http://www.matrox.com/graphics/offhome/dh2go/home.cfm

I currently use a Desktop with a 128MB Nvidia Quadro4 750 XGL running
dual 19" CRT's at 1280 x 1024 (32 bit) (85 Hz).

Can the new Gateway Dual-Cores running the Radeon X1400 64MB get me to
the same level?

Thanks,

CMD

04-28-2006, 03:12 PM

Most Tablet PCs support "an" external monitor through their graphics card,
but the device seems to add additional functionality. I would check with
Gateway's support section first, before counting on that type of support
natively.
--
Chris H.
Microsoft Windows MVP/Tablet PC
Tablet Creations - http://nicecreations.us/
Associate Expert
Expert Zone - www.microsoft.com/windowsxp/expertzone

"CMD" <> wrote in message
news: ups.com...
> Has anyone got any experience with this item?
>
> http://www.matrox.com/graphics/offhome/dh2go/home.cfm
>
> I currently use a Desktop with a 128MB Nvidia Quadro4 750 XGL running
> dual 19" CRT's at 1280 x 1024 (32 bit) (85 Hz).
>
> Can the new Gateway Dual-Cores running the Radeon X1400 64MB get me to
> the same level?
>
> Thanks,
>
> CMD
>

04-29-2006, 03:27 AM

Hi,

The Matrox device will present the two external monitors as a single monitor
with 2560 x 1024 resolution. Best to check with ATI or Gateway what
resolutions are available via the external VGA port. 1600x1200 is usually a
common maximum resolution obtainable via the VGA port.

Cheers
Ken

"CMD" <> wrote in message
news: ups.com...
> Has anyone got any experience with this item?
>
> http://www.matrox.com/graphics/offhome/dh2go/home.cfm
>
> I currently use a Desktop with a 128MB Nvidia Quadro4 750 XGL running
> dual 19" CRT's at 1280 x 1024 (32 bit) (85 Hz).
>
> Can the new Gateway Dual-Cores running the Radeon X1400 64MB get me to
> the same level?
>
> Thanks,
>
> CMD
>

05-11-2006, 08:48 AM

And now available, the Triple Head To Go...
http://www.tomshardware.com/2006/05/...hree_displays/

"CMD" <> wrote in message
news: ups.com...
> Has anyone got any experience with this item?
>
> http://www.matrox.com/graphics/offhome/dh2go/home.cfm
>
> I currently use a Desktop with a 128MB Nvidia Quadro4 750 XGL running
> dual 19" CRT's at 1280 x 1024 (32 bit) (85 Hz).
>
> Can the new Gateway Dual-Cores running the Radeon X1400 64MB get me to
> the same level?
>
> Thanks,
>
> CMD
>

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
using tabletPC as a digitizer and submonitor?	mn9h0st@hotmail.com	Laptops	4	11-07-2006 03:29 PM
Matrox Dual-Head-To-Go and TabletPC	CMD	Tablet PC	3	05-11-2006 08:48 AM
Difference between TabletPC and TabletPC 2005	Newbie	Tablet PC	1	01-20-2006 04:19 PM
A strange default setting on the bios of the C-100 and C-110tci TabletPC	Juan I. Cahis	Acer	0	05-31-2005 02:28 PM
Re: I'm looking into getting a dual-TFT monitor setup for my home office and I want to have DVI for both monitors. I've only found two graphics cards that will do this: the Matrox P-series (Parhelia, P650 and P750) and the Asus 9560. Does anyone know	Paul Duffy	Nvidia	1	12-03-2003 10:58 PM