NF7-S 2.0, USB & Firewire

Hi, both my USB ports and Firewire are mounted on the same backplate,
contrary to reviews I have read. Both of these ports do not work at all so
I'm wondering if I have been supplied the wrong parts, or, that this is
correct for a UK spec board. However if the backplate is wrong where do I
get a replacement???
Chris C

--
System:
ABit NF7-S
Athlon XP 2500+ FSB200x11
Cooler Master Aero 7+
1 x 512 Kingston PC3200 DDR
1 x 80g Matrox ATA133 7200rpm on SATA using ABit adaptor
1 x 20GB WD ATA100 on SATA using adaptor
CDR
LG Burner
ATI 9800XT
SoundBlaster Audigy Player 1394
CT Inspire 5.1 5300
Onboard LAN (Enabled)
Lian Li PC65 case & window
Blue Cold Cathode Tube
550 Watt PSU

That is exactly how mine is (UK), but my ports all work. You do have them
plugged into the appropriate on board headers? Also, you should have two USB
ports under the LAN port on the main backpanel.

Mike Bernstein

"chris.catt" <chris.catt@com> wrote in message
news:Hy2Eb.5207$...
> Hi, both my USB ports and Firewire are mounted on the same backplate,
> contrary to reviews I have read. Both of these ports do not work at all so
> I'm wondering if I have been supplied the wrong parts, or, that this is
> correct for a UK spec board. However if the backplate is wrong where do I
> get a replacement???
> Chris C
>
> --
> System:
> ABit NF7-S
> Athlon XP 2500+ FSB200x11
> Cooler Master Aero 7+
> 1 x 512 Kingston PC3200 DDR
> 1 x 80g Matrox ATA133 7200rpm on SATA using ABit adaptor
> 1 x 20GB WD ATA100 on SATA using adaptor
> CDR
> LG Burner
> ATI 9800XT
> SoundBlaster Audigy Player 1394
> CT Inspire 5.1 5300
> Onboard LAN (Enabled)
> Lian Li PC65 case & window
> Blue Cold Cathode Tube
> 550 Watt PSU
>
>

Hi Mike, you were correct, took my side panel off and discovered that the
USB cable was connected to the firewire and visa versa.
Thanks
Chris

--
System:
ABit NF7-S
Athlon XP 2500+ FSB200x11
Cooler Master Aero 7+
1 x 512 Kingston PC3200 DDR
1 x 80g Matrox ATA133 7200rpm on SATA using ABit adaptor
1 x 20GB WD ATA100 on SATA using adaptor
CDR
LG Burner
ATI 9800XT
SoundBlaster Audigy Player 1394
CT Inspire 5.1 5300
Onboard LAN (Enabled)
Lian Li PC65 case & window
Blue Cold Cathode Tube
550 Watt PSU
"Mike Bernstein"
<mike.bernstein@REMOVE_CAPS_AND_INVALIDchemlaw.co. uk.invalid> wrote in
message news:3fe0bfd4$0$10973$.. .
> That is exactly how mine is (UK), but my ports all work. You do have them
> plugged into the appropriate on board headers? Also, you should have two
USB
> ports under the LAN port on the main backpanel.
>
> Mike Bernstein
>
> "chris.catt" <chris.catt@com> wrote in message
> news:Hy2Eb.5207$...
> > Hi, both my USB ports and Firewire are mounted on the same backplate,
> > contrary to reviews I have read. Both of these ports do not work at all
so
> > I'm wondering if I have been supplied the wrong parts, or, that this is
> > correct for a UK spec board. However if the backplate is wrong where do
I
> > get a replacement???
> > Chris C
> >
> > --
> > System:
> > ABit NF7-S
> > Athlon XP 2500+ FSB200x11
> > Cooler Master Aero 7+
> > 1 x 512 Kingston PC3200 DDR
> > 1 x 80g Matrox ATA133 7200rpm on SATA using ABit adaptor
> > 1 x 20GB WD ATA100 on SATA using adaptor
> > CDR
> > LG Burner
> > ATI 9800XT
> > SoundBlaster Audigy Player 1394
> > CT Inspire 5.1 5300
> > Onboard LAN (Enabled)
> > Lian Li PC65 case & window
> > Blue Cold Cathode Tube
> > 550 Watt PSU
> >
> >
>
>