P4M800-PRO onboard speaker - how to disable ?

How do I disable the beeper on P4M800-PRO v2 ?
Mobo functions fine and really doesn't need diagnostic BIOS beeps on every
startup etc.
They are annoying and loud enough to wake people up. Is there an option
somewhere ? Can't find anything in the manual or BIOS.
TIA for help

Alex

Put a piece of tape over the hole in the center, or drip some epoxy into it.
The former turns it down, the latter turns it off.

Amir



"AlexZ" <> wrote in message
news:Xns98F8AA2076483undefinedsomewhereor@216.196. 97.136...
> How do I disable the beeper on P4M800-PRO v2 ?
> Mobo functions fine and really doesn't need diagnostic BIOS beeps on every
> startup etc.
> They are annoying and loud enough to wake people up. Is there an option
> somewhere ? Can't find anything in the manual or BIOS.
> TIA for help
>
> Alex

"Amir Facade" <> wrote in
news:RZydncnSEr-:

> Put a piece of tape over the hole in the center, or drip some epoxy
> into it. The former turns it down, the latter turns it off.
>
> Amir

Thanks, I think I'll try the epoxy route. I tried the tape already, but
it's not enough. Hopefully it will completely seal it off.

Alex

The epoxy will also prevent the plastic case itself from vibrating.

Amir



"AlexZ" <> wrote in message
news:Xns98F8C23468E04undefinedsomewhereor@216.196. 97.136...
> "Amir Facade" <> wrote in
> news:RZydncnSEr-:
>
>> Put a piece of tape over the hole in the center, or drip some epoxy
>> into it. The former turns it down, the latter turns it off.
>>
>> Amir
>
> Thanks, I think I'll try the epoxy route. I tried the tape already, but
> it's not enough. Hopefully it will completely seal it off.
>
> Alex