P5N32E SLI : Troubles in dual channel mode

Hello
Here is my hardware :
E6600 + P5N32E SLI (BIOS 1101) + 2xDDR2 1Gb CL4 Corsair (2.1v)
Video : 8800 GTX
Vista 32 bits (frequently windows updated, drivers nVidia updated)
No overclocking.

I have frequent Blue Screens or hard reboots when i play 3D games (FSX and
rFactor).
And when i try to use only one DRR2 (no dual channel mode), it works fine.
So i think my troubles might come from the dual channel mode...

What can i do?
Modify voltage? (i use default values expected for DDR2 overloaded at 2.1
volts).
My Northbidge voltage seems too low : 1.34 volts (measured by Probe).

Any other ideas? thanks a lot.

Did you run memtest86 with both sticks in? Do you have any errors?

I had a set of OCZ which worked 100% fine by themselfs, but in dual channel
mode I ran into issues. I had everything manually set (voltage, timings,
etc) and nothing helped. I ended up buying a set of kingston and it worked
fine in dual channel mode - so I sent the OCZ back.

Amy



"TTT" <> wrote in message
news:4657cc4e$0$5380$...
> Hello
> Here is my hardware :
> E6600 + P5N32E SLI (BIOS 1101) + 2xDDR2 1Gb CL4 Corsair (2.1v)
> Video : 8800 GTX
> Vista 32 bits (frequently windows updated, drivers nVidia updated)
> No overclocking.
>
> I have frequent Blue Screens or hard reboots when i play 3D games (FSX and
> rFactor).
> And when i try to use only one DRR2 (no dual channel mode), it works fine.
> So i think my troubles might come from the dual channel mode...
>
> What can i do?
> Modify voltage? (i use default values expected for DDR2 overloaded at 2.1
> volts).
> My Northbidge voltage seems too low : 1.34 volts (measured by Probe).
>
> Any other ideas? thanks a lot.
>

> Did you run memtest86 with both sticks in? Do you have any errors?
MemTest86 no error during 48 hours in dual mode


> I had a set of OCZ which worked 100% fine by themselfs, but in dual
> channel mode I ran into issues. I had everything manually set (voltage,
> timings, etc) and nothing helped. I ended up buying a set of kingston and
> it worked fine in dual channel mode - so I sent the OCZ back.
May be it is what i should do with my Corsair... Are you sure we can sent
back rams without any reason?