Problem on Mobo Asus A7N8X

Hello to all
A colleague told me to take the computer to his son for troubleshooting:
Carte Mere cited above, Athlon XP 2800 +, 512mb DDR2700 Danelec, Hitachi HDD
160GB
Symptoms, the PC does not boot, no beep at POST and broken down saved
He told me that it is the alim who died.
I dismounted and test all components one after another.
I ride a 900 FSB Athlon 4.5 x200, and the remaining component, after having
move the jumper 200/233, 266.400, the PC starts and installing XP on a
HDD without problem.
I said therefore that the CPU has toasted, I tested a sempron 2400 + which
Trolling and no boot, I flash the bios with the latest version, re tests,
nothing, ditto with a Barton 2500 +.
Avecune try another bar DDR2700 @ 333, no boot, no post, no
beep and no trick of speach at Asus, I leave the jumper on 333
or as I put on 200, it nothing happens, I shall give a 800 and XP PC
restart and boot from WinXP with no problem ...
I tested the CPU on a KT266 A and all CPUs start, those at 333 FSB
are not recognized and in turn Xx266 Mhz but start and launch XP.
I do not know what is happening, what could it be that management
266/333/400
is flinguée and only the 200Mhz works? in that case why does the CPU
they would start not view as Undercloqués on KT7 Turbo?
An idea that can help me?
Thank you and good day
--
Roswellbob

are you trollingue dear Robert ?
ze cartmere equipped ouize a Barton at 466 FSB is trop high tuned.
Aille had the patience to read yourre prose until ze bout and I ame sure zat
zis ize nor seriousse.

baille


"Roswellbob" <> a écrit dans le message de news:
4aa27ca4$0$12640$...
>
> Hello to all
> A colleague told me to take the computer to his son for troubleshooting:
> Carte Mere cited above, Athlon XP 2800 +, 512mb DDR2700 Danelec, Hitachi
HDD
> 160GB
> Symptoms, the PC does not boot, no beep at POST and broken down saved
> He told me that it is the alim who died.
> I dismounted and test all components one after another.
> I ride a 900 FSB Athlon 4.5 x200, and the remaining component, after
having
> move the jumper 200/233, 266.400, the PC starts and installing XP on a
> HDD without problem.
> I said therefore that the CPU has toasted, I tested a sempron 2400 + which
> Trolling and no boot, I flash the bios with the latest version, re tests,
> nothing, ditto with a Barton 2500 +.
> Avecune try another bar DDR2700 @ 333, no boot, no post, no
> beep and no trick of speach at Asus, I leave the jumper on 333
> or as I put on 200, it nothing happens, I shall give a 800 and XP PC
> restart and boot from WinXP with no problem ...
> I tested the CPU on a KT266 A and all CPUs start, those at 333 FSB
> are not recognized and in turn Xx266 Mhz but start and launch XP.
> I do not know what is happening, what could it be that management
> 266/333/400
> is flinguée and only the 200Mhz works? in that case why does the CPU
> they would start not view as Undercloqués on KT7 Turbo?
> An idea that can help me?
> Thank you and good day
> --
> Roswellbob
>
>

frischmoutt wrote:
> are you trollingue dear Robert ?
> ze cartmere equipped ouize a Barton at 466 FSB is trop high tuned.
> Aille had the patience to read yourre prose until ze bout and I ame
> sure zat zis ize nor seriousse.
>
> baille

pourtant ça l'est, mais j'ai juste utilisé le traducteur de Google a partir
d'un post sur un newsgroup français, je m'en excuse
:-(
j'essayerai de corriger demain, mais bon je suis pas tres fort en
anglais....
Bye


--
Roswellbob

Roswellbob wrote:
> Hello to all
> A colleague told me to take the computer to his son for troubleshooting:
> Carte Mere cited above, Athlon XP 2800 +, 512mb DDR2700 Danelec, Hitachi HDD
> 160GB
> Symptoms, the PC does not boot, no beep at POST and broken down saved
> He told me that it is the alim who died.
> I dismounted and test all components one after another.
> I ride a 900 FSB Athlon 4.5 x200, and the remaining component, after having
> move the jumper 200/233, 266.400, the PC starts and installing XP on a
> HDD without problem.
> I said therefore that the CPU has toasted, I tested a sempron 2400 + which
> Trolling and no boot, I flash the bios with the latest version, re tests,
> nothing, ditto with a Barton 2500 +.
> Avecune try another bar DDR2700 @ 333, no boot, no post, no
> beep and no trick of speach at Asus, I leave the jumper on 333
> or as I put on 200, it nothing happens, I shall give a 800 and XP PC
> restart and boot from WinXP with no problem ...
> I tested the CPU on a KT266 A and all CPUs start, those at 333 FSB
> are not recognized and in turn Xx266 Mhz but start and launch XP.
> I do not know what is happening, what could it be that management
> 266/333/400
> is flinguée and only the 200Mhz works? in that case why does the CPU
> they would start not view as Undercloqués on KT7 Turbo?
> An idea that can help me?
> Thank you and good day

Are the capacitors in good shape ?

http://upload.wozzap.de/up/A7N8X.jpg

There are occasionally problems with capacitors on A7N8X.

Paul

Paul wrote:

>
> Are the capacitors in good shape ?
>
> http://upload.wozzap.de/up/A7N8X.jpg
>
> There are occasionally problems with capacitors on A7N8X.

all seem's to be in good health....
Thanks for reply

> Paul



--
Roswellbob