Motherboard Forums


Reply
Thread Tools Display Modes

PS/2 mice pause in 32-bit Windows XP Pro. SP3 (safe mode too) and 7 PE liveCD...

 
 
Ant
Guest
Posts: n/a
 
      04-26-2011, 07:27 PM
Hello!

Does anyone know why my PS/2 mice, with its USB adapter (Logitech and
eMachine), like to pause on my new EVGA X58 SLI (132-BL-E758; BIOS date
5/11/2010; v6.00 PG; release number IX58SZ64) motherboard in 32-bit
Windows? I never had this problem with my other older motherboards with
pure PS/2 connections, but this new motherboard only has a PS/2 keyboard
port so I was forced to use a USB adapter for the mouse. The reason for
a PS/2 mouse is because I use a KVM to share my monitor, mouse, and
keyboard. I already eliminated the cables and KVM switch box to see
where the pauses are coming from. They're not from KVM and its cables.


My PS/2 mice likes to pause in 32-bit Windows. Rear ports seems to pause
way more than the front. The pauses can cause randomly and every few
seconds. I also tried different adapter cables beside different PS/2
mice. I can reproduce this in both 32-bit Windows XP Pro. SP3 (safe mode
too) and 7 PE liveCD.

I was not able to reproduce it with a KNOPPIX v6.4.4 liveCD, but I did
notice these USB errors in dmesg command:
a_codec_realtek cx24123 cx24113 i7core_edac snd_hda_intel r8169 mii
s5h1420 edac_core snd_hda_codec i2c_i801
[ 14.355804] Pid: 2102, comm: modprobe Tainted: G W 2.6.37
#13
[ 14.355807] Call Trace:
[ 14.355812] [<c0133505>] warn_slowpath_common+0x77/0x8c
[ 14.355816] [<c01fd12c>] ? __xlate_proc_name+0x99/0xa0
[ 14.355820] [<c01fd12c>] ? __xlate_proc_name+0x99/0xa0
[ 14.355824] [<c0133596>] warn_slowpath_fmt+0x2e/0x30
[ 14.355827] [<c01fd12c>] __xlate_proc_name+0x99/0xa0
[ 14.355831] [<c01fdb67>] __proc_create+0x46/0xea
[ 14.355835] [<c01fdd8b>] proc_mkdir_mode+0x23/0x47
[ 14.355839] [<c01fddbe>] proc_mkdir+0xf/0x11
[ 14.355844] [<c01751e8>] register_handler_proc+0xce/0xde
[ 14.355849] [<c01734af>] __setup_irq+0x216/0x277
[ 14.355854] [<c02f1fc2>] ? __pci_request_region+0xb0/0xf8
[ 14.355858] [<c017390d>] request_threaded_irq+0x109/0x12e
[ 14.355865] [<f839a109>] ? flexcop_pci_isr+0x0/0xf0
[b2c2_flexcop_pci]
[ 14.355871] [<f839a363>] flexcop_pci_probe+0x16a/0x281
[b2c2_flexcop_pci]
[ 14.355875] [<c02f329f>] local_pci_probe+0x3e/0x81
[ 14.355879] [<c02f3d63>] pci_device_probe+0x43/0x66
[ 14.355884] [<c0380d7b>] driver_probe_device+0x97/0x128
[ 14.355887] [<c0380e4f>] __driver_attach+0x43/0x5f
[ 14.355892] [<c0380532>] bus_for_each_dev+0x3d/0x67
[ 14.355896] [<c0380c13>] driver_attach+0x19/0x1b
[ 14.355899] [<c0380e0c>] ? __driver_attach+0x0/0x5f
[ 14.355902] [<c03808fb>] bus_add_driver+0x9e/0x1e3
[ 14.355906] [<c03810a2>] driver_register+0x84/0xeb
[ 14.355910] [<c02f3f45>] __pci_register_driver+0x38/0x95
[ 14.355916] [<f839d017>] flexcop_pci_module_init+0x17/0x19
[b2c2_flexcop_pci]
[ 14.355920] [<c0101174>] do_one_initcall+0x87/0x13d
[ 14.355925] [<f839d000>] ? flexcop_pci_module_init+0x0/0x19
[b2c2_flexcop_pci]
[ 14.355930] [<c015df40>] sys_init_module+0xcd4/0xe74
[ 14.355936] [<c057df05>] syscall_call+0x7/0xb
[ 14.355940] ---[ end trace 5a0003f5d005a066 ]---
[ 14.366953] DVB: registering new adapter (FlexCop Digital TV device)
[ 14.368564] b2c2-flexcop: MAC address = 00:d0:d7:30:19:c1
[ 14.369171] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
[ 14.369173] CX24123: wrong demod revision: 87
[ 14.570685] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a,
err == -121)
[ 14.570689] Unknown/Unsupported NXT chip: 00 00 00 00 00
[ 14.571177] lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02
error (ret == -121)
[ 14.571514] bcm3510: Revision: 0x1, Layer: 0xb.
[ 14.583081] b2c2-flexcop: found 'Broadcom BCM3510 VSB/QAM frontend' .
[ 14.583085] DVB: registering adapter 1 frontend 0 (Broadcom BCM3510
VSB/QAM frontend)...
[ 14.583191] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC
1st generation' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
[ 14.612931] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 15.874030] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 15.894649] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 16.272853] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 20.818513] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 22.974664] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 26.511687] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 28.707741] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 31.679122] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 33.183186] [drm] Initialized drm 1.1.0 20060810
[ 33.412969] [drm] radeon kernel modesetting enabled.
[ 33.413014] radeon 0000:02:00.0: PCI INT A -> GSI 16 (level, low) ->
IRQ 16
[ 33.413018] radeon 0000:02:00.0: setting latency timer to 64
[ 33.413881] [drm] initializing kernel modesetting (RV770
0x1002:0x9440).
[ 33.414052] [drm] register mmio base: 0xF3BE0000
[ 33.414055] [drm] register mmio size: 65536
[ 33.414275] ATOM BIOS: WEKIVA
[ 33.414290] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 -
0x000000001FFFFFFF (512M used)
[ 33.414292] radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 -
0x000000003FFFFFFF
[ 33.417099] [drm] Detected VRAM RAM=512M, BAR=256M
[ 33.417101] [drm] RAM width 256bits DDR
[ 33.417163] [TTM] Zone kernel: Available graphics memory: 440070
kiB.
[ 33.417166] [TTM] Zone highmem: Available graphics memory: 1291818
kiB.
[ 33.417168] [TTM] Initializing pool allocator.
[ 33.417185] [drm] radeon: 512M of VRAM memory ready
[ 33.417187] [drm] radeon: 512M of GTT memory ready.
[ 33.417232] radeon 0000:02:00.0: irq 44 for MSI/MSI-X
[ 33.417237] radeon 0000:02:00.0: radeon: using MSI.
[ 33.417263] [drm] radeon: irq initialized.
[ 33.417265] [drm] GART: num cpu pages 131072, num gpu pages 131072
[ 33.417525] [drm] Loading RV770 Microcode
[ 33.564928] radeon 0000:02:00.0: WB enabled
[ 33.611699] [drm] ring test succeeded in 1 usecs
[ 33.611807] [drm] radeon: ib pool ready.
[ 33.611902] [drm] ib test succeeded in 0 usecs
[ 33.611904] [drm] Enabling audio support
[ 33.611909] failed to evaluate ATIF got AE_BAD_PARAMETER
[ 33.612360] [drm] Radeon Display Connectors
[ 33.612362] [drm] Connector 0:
[ 33.612363] [drm] DVI-I
[ 33.612364] [drm] HPD2
[ 33.612365] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68
0x7e6c 0x7e6c
[ 33.612366] [drm] Encoders:
[ 33.612368] [drm] DFP1: INTERNAL_UNIPHY
[ 33.612369] [drm] CRT2: INTERNAL_KLDSCP_DAC2
[ 33.612370] [drm] Connector 1:
[ 33.612371] [drm] DIN
[ 33.612372] [drm] Encoders:
[ 33.612373] [drm] TV1: INTERNAL_KLDSCP_DAC2
[ 33.612374] [drm] Connector 2:
[ 33.612374] [drm] DVI-I
[ 33.612375] [drm] HPD1
[ 33.612377] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28
0x7e2c 0x7e2c
[ 33.612378] [drm] Encoders:
[ 33.612379] [drm] CRT1: INTERNAL_KLDSCP_DAC1
[ 33.612380] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
[ 33.718954] [drm] Internal thermal controller with fan control
[ 33.719028] [drm] radeon: power management initialized
[ 33.852563] [drm] fb mappable at 0xD0142000
[ 33.852565] [drm] vram apper at 0xD0000000
[ 33.852566] [drm] size 5242880
[ 33.852567] [drm] fb depth is 24
[ 33.852568] [drm] pitch is 5120
[ 34.278659] Console: switching to colour frame buffer device 160x64
[ 34.285293] fb0: radeondrmfb frame buffer device
[ 34.285294] drm: registered panic notifier
[ 34.285297] [drm] Initialized radeon 2.7.0 20080528 for 0000:02:00.0
on minor 0
[ 40.114035] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 42.180338] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 46.612427] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 49.680232] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 54.654704] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 62.480716] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 64.463835] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 67.049219] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 69.844227] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 79.277358] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 89.652149] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 94.872817] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 95.632505] NET: Registered protocol family 10
[ 95.633185] lo: Disabled Privacy Extensions
[ 97.062232] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 103.108100] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 108.446748] lp: driver loaded but no devices found
[ 108.470690] ppdev: user-space parallel port driver
[ 108.498813] r8169 0000:07:00.0: eth0: link down
[ 108.498899] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 108.534227] r8169 0000:08:00.0: eth1: link up
[ 108.534238] r8169 0000:08:00.0: eth1: link up
[ 114.008620] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 116.387697] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 119.036273] eth1: no IPv6 routers present
[ 124.183759] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 130.093198] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 151.614751] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 159.354201] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 164.897676] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 181.125314] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 189.863026] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 198.287969] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 212.765426] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 220.704585] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 223.333203] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 226.407712] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 228.899943] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 231.086014] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 234.935796] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 239.201473] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 243.450576] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 259.398739] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 264.829034] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 269.820114] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 292.173511] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 328.791420] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 351.024955] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 353.221014] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 370.343766] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 378.465890] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 381.101197] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 393.678725] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 404.699026] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 413.905902] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 433.114917] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 436.019723] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 451.412212] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 462.702018] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 468.012513] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 472.431309] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 479.049477] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 483.508131] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 490.518934] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 505.102857] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 506.906330] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 511.571328] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 514.143401] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 516.888492] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 521.649982] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 526.105354] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 541.391366] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 543.713877] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 550.631512] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 553.107087] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 555.832232] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 557.812012] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 560.294241] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 570.406189] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 577.017682] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 581.619455] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 587.688625] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 594.386637] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 600.938226] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 607.060651] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 620.799395] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 631.533556] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 645.668278] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 653.797110] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 656.409120] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 668.930050] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 698.959723] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 715.084235] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 720.348117] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 732.822526] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 768.655149] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 799.909251] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 829.942268] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 840.277108] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 843.261804] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 851.121066] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 858.581075] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 860.727237] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 868.579872] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 882.252097] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 886.833925] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 894.956061] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 897.857542] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 904.013170] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 909.147360] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 934.831444] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 1012.020116] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 1019.303808] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 1038.076903] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 1040.961754] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 1088.001000] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 1094.046886] usb 7-1: reset low speed USB device using uhci_hcd and
address 2
[ 1105.762590] usb 7-1: reset low speed USB device using uhci_hcd and
address 2


Does Windows not reset USB device or something? I also tried Logitech
Mouseware, but that didn't seem to help either.

Thank you in advance.

FYI on my PC specifications: Intel i7 950 CPU, three 2 GB of Kingston
HyperX T1 Series 240-Pin DDR3 SDRAM 2000 (PC3 16000) Desktop Memory
Model KHX2000C9AD3T1K3/6GX DDR3 RAM (6 GB total; 2.5 GB shown; will
install a 64-bit OS later on to use it all) in 32-bit old, updated
Windows XP Pro. SP3 (Internet Explorer [rarely used] v6.0 SP3 and
DirectX 9.0c [June 2010]), EVGA X58 SLI (132-BL-E758; BIOS date
5/11/2010; v6.00 PG; release number IX58SZ64) motherboard, MSI
R4870-T2D512 OC Radeon HD 4870 512 MB (S-video+composite cables and
adapter connected to Toshiba W-627 VCR to a January 1996 20" Sharp CRT
TV), an used mid-tower Antec P180 ATX case, five 120 mm case fans, a
side dual cooler fan to cool PCI cards, two onboard RealTek Gigabit
Ethernets and onboard RealTek sound, Corsair CMPSU-650TX 650 watts
ATX12V/EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC
power supply, two Broadband Technologies Air2PC-ATSC-PCI HDTV tuner
cards (DVB; revision 2; connected to a DB2 bowtie antenna), LG HL-DT-ST
DVDRAM GH24NS50 burner drive, Sony NEC Optiarc DVD-RW AD-7220S SATA
burner drive, two internal 7200 RPM Seagate SATA hard disk drives (HDDs)
[ST3320620AS 320 GB and ST3500320AS 500 GB], and Logitech Z-2300
speakers (2.1 setup and analog).
--
Quote of the Week: "The foreign policy aim of ants can be summed up as
follows: restless aggression, territorial conquest, and genocidal
annihilation of neighboring colonies whenever possible. If ants had
nuclear weapons, they would probably end the world in a week." --Journey
to the Ants, page 59. Bert Holldobler & Edward O. Wilson
/\___/\ Ant @ http://antfarm.home.dhs.org (Personal Web Site)
/ /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net
| |o o| |
\ _ / Please nuke ANT if replying by e-mail. If crediting,
( ) then please kindly use Ant nickname and AQFL URL/link.
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
PS/2 mice pause in 32-bit Windows XP Pro. SP3 (safe mode too) and 7 PE liveCD... Ant Intel 0 04-26-2011 07:27 PM
Re: PS/2 mice pause in 32-bit Windows XP Pro. SP3 (safe mode too)and 7 PE liveCD... Ant IBM 0 04-26-2011 01:49 PM
Which to use, MS SP3 download or Dell Reinstallation SP3 CD. mm Dell 2 10-23-2010 09:09 AM
WTB: Windows XP Pro Recovery Book and CD SP1, SP2, SP3 and or just CDalone. network buyer Dell 1 12-12-2009 10:56 PM
TV On Demand Audio Help...pause live tv..audio does not pause Greg ATI 0 10-18-2003 04:02 AM


All times are GMT. The time now is 05:16 AM.


Welcome!
Welcome to Motherboard Point
 

Advertisment