I have had the same problem with mine off and on for about 2yrs. I just
rebooted the computer until the devices on the secondary ide channel showed
up. I haven't had the problem since I flashed my bios with the Honey X pro
bios. Yes I am running the pro bios on a non pro board. It works for me.
Thanks to Shep for providing it in bootable CD-Rom format.
<> wrote in message
news:...
Have WinXP that boots fine with HD & CDRW as Master/slave on
primary IDE,,but unable to see other CDRom or HDr that are
loaded on secondary IDE. All will show fine & are switchable
in the BIOS-as master/slave,,HDr or CD's,but unable to see
the other devices on the Secondary in Explorer or Device
Manger under CDROMS ,,,{only the one loaded on the primary
IDE},, No yellow icons shown on the Hard Disk Controllers.
I have interchanged the cables 40/80 pins,settings on
devices master/slaves & it will reflect in the BIOS.Still
not seen. Any ideas? Thanks for reading.
BudinFL
|
Similar Threads
Linear Mode
