Re: K7S5A Pro v5.0 won't recognize 2400+ processor

133/133 is the correct setting for this processor

Cheers
Pokey

"Joe Lastoria" <> wrote in message
news:fxrUa.31807$ ...
> Thanks to everyone who helped with suggestions. It seems that there was
no
> need to update the bios at all.
>
> Although i wasn't able to successfully change the the mainboard's bios
> settings from 100/100 to 166/133, I simply changed it to 133/133 and the
> system booted up at 2400+ instead of 1800+.
>
> Thanks again,
>
> Joe
>
> "Joe Lastoria" <> wrote in message
> news:h_pUa.31801$ ...
> > For the memory I am using PC133 SDRAM so I changed the bios settings to:
> > Processor: 166mhz
> > Memory: 133mhz
> >
> > The system refused to boot-up (or even post). I am going to try
flashing
> > the bios tonight so hopefully all will be fine after I do so.
> >
> > Does anyone know if those are the right settings for a 2400+ using PC133
> > SDRAM?
> >
> > Joe
> > "<>" <> wrote in message
> > news:bfscuk$i9ufe$...
> > > Check you memory and CPU bus speeds in the BIOS under CPU
> > >
> > >
> > > "Joe Lastoria" <> wrote in message
> > > news:RSeUa.31423$ ...
> > > > Hi Guys,
> > > >
> > > > My K7S5A Pro v5.0 works just fine but my processor is only running
at
> > > 1800+
> > > > (as it states at startup) instead of running at 2400+ as the retail
> box
> > on
> > > > the processor says it should.
> > > >
> > > > Does anyone have any ideas about this?
> > > >
> > > > Thanks in advance for your help ,
> > > >
> > > > Joe
> > > >
> > > >
> > >
> > >
> >
> >
>
>