MRCOSMITH wrote:
> I have a Microstar MS-6570 motherboard and I’m trying to find out the
> >pin configurations for the front USB ports and the power i/o (power
> >switch, reset switch, hdd led, power led, standby led, etc.). Anyone
>
> >know where to go or have a manual? This question came up in 2003
> with no answer. I am in the same situation. Please Help
>
K7N2-L Nforce2 board. There are a couple boards that share MS-6570 and
the PCBs look similar on these two pages.
http://www.msicomputer.com/product/d...p?model=K7N2-L
http://www.msicomputer.com/product/p...lta-L&class=mb
There is a manual download, on this page.
http://global.msi.com.tw/index.php?f...=1&prod_no=546
http://download1.msi.com.tw/files/do.../E6570v1.3.zip
http://download1.msi.com.tw/files/do.../E6570v1.0.zip
It is likely, that those manuals aren't exactly for your motherboard,
but for the purposes of the PANEL header or USB wiring and the
like, they should help you.
For the USBOC pin on the 2x5 USB connector, you might want to
disconnect that. If it is left connected, the computer may
report an "overcurrent" problem. If USBOC is grounded, that
signals an overcurrent problem with the connector. When pin 10
on the header is unconnected, then no overcurrent will be
reported. Pin 10 would normally be used, with a USB wiring
assembly that supports overcurrent detection in some way.
Paul
Linear Mode
