Re: P4P800 Deluxe WOL - help

Have setup the Bios to Wake on PCI, set the properties for the 3Com NIC
to accept Both for Wake On Lan (i.e. Magic Packets) in Win2k.

Used a couple of apps downloaded from Depicus but the machine still fails
to Wake up when in Standby.

Any other help would be appreciated.

Thanks




Subject: Re: P4P800 Deluxe WOL - help
From: "Al" <>
Newsgroups: alt.comp.periphs.mainboard.asus
Reply-To: "Al" <>

"Pedge" <> escreveu na mensagem
news:40049c21$0$10802$ ...
> Anybody managed to get Wake On Lan setup and working using the onboard
3Com
> chip on this board?
>
> If so can you let me know how it was done.
>

Hi,

You must set the properties for your network card in control panel, there
is
a option for the network card related to power management that enables
wake
on lan request. You must also set that option in your bios, wake on pci
or
something like that.

After you have correctly se up your computer, you must send magic packets
to
wake your computer, you can get it from here :

http://www.matcode.com/wol.htm

or

http://www.depicus.com/wake-on-lan/

or

http://www.amd.com/us-en/assets/cont.../magic_pkt.exe

On 19 Jan 2004 03:38:52 GMT, Pedge <> wrote:

>Have setup the Bios to Wake on PCI, set the properties for the 3Com NIC
>to accept Both for Wake On Lan (i.e. Magic Packets) in Win2k.
>
>Used a couple of apps downloaded from Depicus but the machine still fails
>to Wake up when in Standby.
>
>Any other help would be appreciated.

I missed the beginnings of this thread, but does the system wake properly from
the keyboard? And when it is in standby mode, is there a link light on the
nic? Also, is the system in the same subnet as the one you're using to wake
it?

Try MC-WOL.EXE (Google it). If anything will wake that puppy, MC-WOL will...

/daytripper