S2460 and large Harddisk

Hi everywhere.

The Board (S2460 with last Firmware) does only recognise 128 GB
of my HD (Seagate 250GB). I thought the Board hasn't that Limit.

Any Possibility to use Partitions bigger than 128GB? And how?

Thanks for Help (and Mercy for my poor english).
--
ryl: GKar

hi ,

the disk is shown as 128gb in the bios-setup ?

if you don't want to use a diskmanager or an additional ide-card - no .
otherwise use a risky diskmanager and let it translate or buy some
expansion-card and plug in your too big disks there .

In article <Xns99748BEB6B679gkar1gmxbiz@127.0.0.1>, says...
> Hi everywhere.
>
> The Board (S2460 with last Firmware) does only recognise 128 GB
> of my HD (Seagate 250GB). I thought the Board hasn't that Limit.
>
> Any Possibility to use Partitions bigger than 128GB? And how?
>
> Thanks for Help (and Mercy for my poor english).
>

--
gravity is still active
-<--@
gruss , wolfgang

wolfgang schneider hammered in the Keyboard

> the disk is shown as 128gb in the bios-setup ?

Yes, in the bios Setup. But the curious thing is,
after adding a Entry in the Registry "EnableBigLba"
i was able to use the complete 250 GB (232 GB).
But after a few Restarts, the HD seems to be empty.

> if you don't want to use a diskmanager or an additional
> ide-card - no . otherwise use a risky diskmanager and
> let it translate or buy some expansion-card and plug
> in your too big disks there .

I think i'll use some RAID Controller Card.
Thanks for your Answer.
--
ryl: GKar