Sempron 2400+ Settings

Just met one of these things for the first time. By default, shows as XP
1000. Clocked up to show XP2000 and still stable with temp of 40C.
Simple question, where should I leave it without contravening the
manufacturers settings?
Doubt if it could be as simple as 2400 because the XP 2600+ thbd only
runs as just over 2.

Board:- MSI KT4AV-L
Memory 512 DDR 2700 333

W

On Mon, 27 Sep 2004 19:37:26 +0100, needtooknow-basis wrote:

> Just met one of these things for the first time. By default, shows as XP
> 1000. Clocked up to show XP2000 and still stable with temp of 40C.
> Simple question, where should I leave it without contravening the
> manufacturers settings?
> Doubt if it could be as simple as 2400 because the XP 2600+ thbd only
> runs as just over 2.
>
> Board:- MSI KT4AV-L
> Memory 512 DDR 2700 333
>
It's designed for a default 166Mhz FSB, and that's probably where you have
yours now if it's reading as an 2000+ XP. Semprons are XP's only setup
with defaylt 166MHz FSB and ratings that compare it to Celerons. If your
board doesn't support the new Sempron name it should report as an XP -400,
thus the Sempron 2400+ is approximately the same as an Athlon XP 2000+.
To get max performance out of the Semprons, you'll need a FSB of 200 or
higher. 233MHz should be easy.

--
Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
http://mysite.verizon.net/res0exft/cpu.htm

Got it!, Many thanks!

W
"Wes Newell" <> wrote in message
newsan.2004.09.28.00.05.47.502865@TAKEOUTverizon .net...
> On Mon, 27 Sep 2004 19:37:26 +0100, needtooknow-basis wrote:
>
>> Just met one of these things for the first time. By default, shows as XP
>> 1000. Clocked up to show XP2000 and still stable with temp of 40C.
>> Simple question, where should I leave it without contravening the
>> manufacturers settings?
>> Doubt if it could be as simple as 2400 because the XP 2600+ thbd
>> only
>> runs as just over 2.
>>
>> Board:- MSI KT4AV-L
>> Memory 512 DDR 2700 333
>>
> It's designed for a default 166Mhz FSB, and that's probably where you have
> yours now if it's reading as an 2000+ XP. Semprons are XP's only setup
> with defaylt 166MHz FSB and ratings that compare it to Celerons. If your
> board doesn't support the new Sempron name it should report as an XP -400,
> thus the Sempron 2400+ is approximately the same as an Athlon XP 2000+.
> To get max performance out of the Semprons, you'll need a FSB of 200 or
> higher. 233MHz should be easy.
>
> --
> Abit KT7-Raid (KT133) Tbred B core CPU @2400MHz (24x100FSB)
> http://mysite.verizon.net/res0exft/cpu.htm