Shuttle SB81P

Hello,
I have been runnning my SB81P for a wwek now, with no problems.
Then, using SiSoft Sandra 2005, i see the following:
Relevant lines marked with >>>

>>> Auto Fan Speed Control : No

>>> Warning 216 : CPU fan has failed! Check it.

CPU-Temp is at 55C, so cooling is taking place.
I do feel that the fan is noisy, doesn't seem to alter speed, running at
the same RPM all the time,

Any good advice out there?

Greetings from Nils Langeland




SiSoftware Sandra

Processor
Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
Speed : 3.22GHz
Performance Rating : PR4276 (estimated)
CPUs per Core : 1 Unit(s)
SMT Support : 2 Unit(s)
Type : Standard
Package : FC LGA775
Rated Speed/FSB : 3200MHz / 4x 200MHz
Multiplier : 16/1x
Minimum/Maximum Multiplier : 2/1x / 16/1x
Generation : G8
Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
Revision/Stepping : 3 / 4 (0)
Stepping Mask : D0
Microcode : MU0F340E
Maximum Physical / Virtual Addressing : 36-bit / 32-bit
Native Page Size : 4kB

Co-Processor (FPU)
Type : Built-in
Revision/Stepping : 3 / 4 (0)

Processor Cache(s)
Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64 byte
line size, 2 threads sharing
Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64 byte
line size
L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte line
size, 2 lines per sector, 2 threads sharing
L2 Cache Multiplier : 1/1x (3215MHz)

Upgradeability
Socket/Slot : Socket 478
Upgrade Interface : ZIF Socket
Supported Speed(s) : 3.22GHz+

Environment Monitor 1
Model : ITE IT8705/12 ISA
Mainboard Specific Support : No

Sensors
CPU Temperature : 55.0°C / 131.0°F td
>>> Auto Fan Speed Control : No
CPU Fan Speed : 654rpm
CPU Voltage : 1.30V

Features
FPU - Co-Processor Built-in : Yes
VME - Virtual Mode Extensions : Yes
DE - Debugging Extension : Yes
PSE - Page Size Extension : Yes
TSC - Time Stamp Counter : Yes
MSR - Model Specific Registers : Yes
PAE - Physical Address Extension : Yes
MCE - Machine Check Exception : Yes
CX8 - Compare & Exchange Instruction : Yes
APIC - Local APIC Built-in : Yes
SEP - Fast System Call : Yes
MTRR - Memory Type Range Registers : Yes
PGE - Page Global Enable : Yes
MCA - Machine Check Architecture : Yes
PAT - Page Attribute Table : Yes
PSE36 - 36-bit Page Size Extension : Yes
PSN - Unique Serial Number : No
CLF - Cache Line Flush Support : Yes
DS - Debug Trace & EMON Store : Yes
ACPI - Software Clock Control : Yes
(W)MMX Technology : Yes
FXSR - Fast Float Save & Restore : Yes
SSE Technology : Yes
SSE2 Technology : Yes
SS - Self Snoop : Yes
HTT - Hyper-Threading Technology : Yes
TM - Thermal Monitor : Yes
PBE - Pending Break Enable : Yes
IA64 Technology : No
SSE3 Technology : Yes
MON - Monitor/MWait : Yes
DSCPL - CPL qualified Debug Store : Yes
EST - Enhanced SpeedStep Technology : No
TM2 - Thermal Monitor 2 : No
CID - Context ID : Yes
xTPR - Send Task Priority Messages : Yes
DAZ - Denormals Are Zero : Yes

Advanced Settings
Data Error Checking : No
Fast Strings : No
x86 FPU Compatibility Mode : No
Prefetch Queue : Yes
Branch Trace Storage : Yes
Data Cache Active Mode : Yes
IO Queue Depth : 12 request(s)
TM - Thermal Monitor : Yes
TM2 - Thermal Monitor 2 : No
Specific Platform Requirements : No
Control Temperature : 68.0°C / 154.4°F

Machine Check Architecture Settings
Number of Reporting Banks : 4 bank(s)
Extended Machine Check Support : Yes
Number of Extended Reporting Banks : 12 bank(s)

Variable Range MTRR Settings
MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB

Fixed Range MTRR Settings
MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT

PAT Settings
PAT 0 : WB
PAT 1 : WC
PAT 2 : UC-
PAT 3 : UC
PAT 4 : WB
PAT 5 : WC
PAT 6 : UC-
PAT 7 : UC

Performance Tips
Notice 224 : SMBIOS/DMI information may be inaccurate.
>>> Warning 216 : CPU fan has failed! Check it.
Tip 2 : Double-click tip or press Enter while a tip is selected for more
information about the tip.

Does your SB81P has the most recent BIOS? Shuttle has made some changes
in the thermal config lately...

Regards,
Evert

Nils Langeland wrote:
> Hello,
> I have been runnning my SB81P for a wwek now, with no problems.
> Then, using SiSoft Sandra 2005, i see the following:
> Relevant lines marked with >>>
>
>>>> Auto Fan Speed Control : No
>
>
>>>> Warning 216 : CPU fan has failed! Check it.
>
>
> CPU-Temp is at 55C, so cooling is taking place.
> I do feel that the fan is noisy, doesn't seem to alter speed, running
> at the same RPM all the time,
>
> Any good advice out there?
>
> Greetings from Nils Langeland
>
>
>
>
> SiSoftware Sandra
>
> Processor
> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
> Speed : 3.22GHz
> Performance Rating : PR4276 (estimated)
> CPUs per Core : 1 Unit(s)
> SMT Support : 2 Unit(s)
> Type : Standard
> Package : FC LGA775
> Rated Speed/FSB : 3200MHz / 4x 200MHz
> Multiplier : 16/1x
> Minimum/Maximum Multiplier : 2/1x / 16/1x
> Generation : G8
> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
> Revision/Stepping : 3 / 4 (0)
> Stepping Mask : D0
> Microcode : MU0F340E
> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
> Native Page Size : 4kB
>
> Co-Processor (FPU)
> Type : Built-in
> Revision/Stepping : 3 / 4 (0)
>
> Processor Cache(s)
> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64 byte
> line size, 2 threads sharing
> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64 byte
> line size
> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte line
> size, 2 lines per sector, 2 threads sharing
> L2 Cache Multiplier : 1/1x (3215MHz)
>
> Upgradeability
> Socket/Slot : Socket 478
> Upgrade Interface : ZIF Socket
> Supported Speed(s) : 3.22GHz+
>
> Environment Monitor 1
> Model : ITE IT8705/12 ISA
> Mainboard Specific Support : No
>
> Sensors
> CPU Temperature : 55.0°C / 131.0°F td
>
>>>> Auto Fan Speed Control : No
>
> CPU Fan Speed : 654rpm
> CPU Voltage : 1.30V
>
> Features
> FPU - Co-Processor Built-in : Yes
> VME - Virtual Mode Extensions : Yes
> DE - Debugging Extension : Yes
> PSE - Page Size Extension : Yes
> TSC - Time Stamp Counter : Yes
> MSR - Model Specific Registers : Yes
> PAE - Physical Address Extension : Yes
> MCE - Machine Check Exception : Yes
> CX8 - Compare & Exchange Instruction : Yes
> APIC - Local APIC Built-in : Yes
> SEP - Fast System Call : Yes
> MTRR - Memory Type Range Registers : Yes
> PGE - Page Global Enable : Yes
> MCA - Machine Check Architecture : Yes
> PAT - Page Attribute Table : Yes
> PSE36 - 36-bit Page Size Extension : Yes
> PSN - Unique Serial Number : No
> CLF - Cache Line Flush Support : Yes
> DS - Debug Trace & EMON Store : Yes
> ACPI - Software Clock Control : Yes
> (W)MMX Technology : Yes
> FXSR - Fast Float Save & Restore : Yes
> SSE Technology : Yes
> SSE2 Technology : Yes
> SS - Self Snoop : Yes
> HTT - Hyper-Threading Technology : Yes
> TM - Thermal Monitor : Yes
> PBE - Pending Break Enable : Yes
> IA64 Technology : No
> SSE3 Technology : Yes
> MON - Monitor/MWait : Yes
> DSCPL - CPL qualified Debug Store : Yes
> EST - Enhanced SpeedStep Technology : No
> TM2 - Thermal Monitor 2 : No
> CID - Context ID : Yes
> xTPR - Send Task Priority Messages : Yes
> DAZ - Denormals Are Zero : Yes
>
> Advanced Settings
> Data Error Checking : No
> Fast Strings : No
> x86 FPU Compatibility Mode : No
> Prefetch Queue : Yes
> Branch Trace Storage : Yes
> Data Cache Active Mode : Yes
> IO Queue Depth : 12 request(s)
> TM - Thermal Monitor : Yes
> TM2 - Thermal Monitor 2 : No
> Specific Platform Requirements : No
> Control Temperature : 68.0°C / 154.4°F
>
> Machine Check Architecture Settings
> Number of Reporting Banks : 4 bank(s)
> Extended Machine Check Support : Yes
> Number of Extended Reporting Banks : 12 bank(s)
>
> Variable Range MTRR Settings
> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
>
> Fixed Range MTRR Settings
> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
>
> PAT Settings
> PAT 0 : WB
> PAT 1 : WC
> PAT 2 : UC-
> PAT 3 : UC
> PAT 4 : WB
> PAT 5 : WC
> PAT 6 : UC-
> PAT 7 : UC
>
> Performance Tips
> Notice 224 : SMBIOS/DMI information may be inaccurate.
>
>>>> Warning 216 : CPU fan has failed! Check it.
>
> Tip 2 : Double-click tip or press Enter while a tip is selected for
> more information about the tip.

Thanks Evert.
Do you have a straight-forward procedure for flashing the BIOS?
I only find a .bin file on SHUTTLE, but that's not enough for flashing
from a floppy - or?

Nils

On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie <>
wrote:

> Does your SB81P has the most recent BIOS? Shuttle has made some changes
> in the thermal config lately...
>
> Regards,
> Evert
>
> Nils Langeland wrote:
>> Hello,
>> I have been runnning my SB81P for a wwek now, with no problems.
>> Then, using SiSoft Sandra 2005, i see the following:
>> Relevant lines marked with >>>
>>
>>>>> Auto Fan Speed Control : No
>>
>>>>> Warning 216 : CPU fan has failed! Check it.
>> CPU-Temp is at 55C, so cooling is taking place.
>> I do feel that the fan is noisy, doesn't seem to alter speed, running
>> at the same RPM all the time,
>> Any good advice out there?
>> Greetings from Nils Langeland
>> SiSoftware Sandra
>> Processor
>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
>> Speed : 3.22GHz
>> Performance Rating : PR4276 (estimated)
>> CPUs per Core : 1 Unit(s)
>> SMT Support : 2 Unit(s)
>> Type : Standard
>> Package : FC LGA775
>> Rated Speed/FSB : 3200MHz / 4x 200MHz
>> Multiplier : 16/1x
>> Minimum/Maximum Multiplier : 2/1x / 16/1x
>> Generation : G8
>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
>> Revision/Stepping : 3 / 4 (0)
>> Stepping Mask : D0
>> Microcode : MU0F340E
>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
>> Native Page Size : 4kB
>> Co-Processor (FPU)
>> Type : Built-in
>> Revision/Stepping : 3 / 4 (0)
>> Processor Cache(s)
>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64 byte
>> line size, 2 threads sharing
>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64
>> byte line size
>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte line
>> size, 2 lines per sector, 2 threads sharing
>> L2 Cache Multiplier : 1/1x (3215MHz)
>> Upgradeability
>> Socket/Slot : Socket 478
>> Upgrade Interface : ZIF Socket
>> Supported Speed(s) : 3.22GHz+
>> Environment Monitor 1
>> Model : ITE IT8705/12 ISA
>> Mainboard Specific Support : No
>> Sensors
>> CPU Temperature : 55.0°C / 131.0°F td
>>
>>>>> Auto Fan Speed Control : No
>> CPU Fan Speed : 654rpm
>> CPU Voltage : 1.30V
>> Features
>> FPU - Co-Processor Built-in : Yes
>> VME - Virtual Mode Extensions : Yes
>> DE - Debugging Extension : Yes
>> PSE - Page Size Extension : Yes
>> TSC - Time Stamp Counter : Yes
>> MSR - Model Specific Registers : Yes
>> PAE - Physical Address Extension : Yes
>> MCE - Machine Check Exception : Yes
>> CX8 - Compare & Exchange Instruction : Yes
>> APIC - Local APIC Built-in : Yes
>> SEP - Fast System Call : Yes
>> MTRR - Memory Type Range Registers : Yes
>> PGE - Page Global Enable : Yes
>> MCA - Machine Check Architecture : Yes
>> PAT - Page Attribute Table : Yes
>> PSE36 - 36-bit Page Size Extension : Yes
>> PSN - Unique Serial Number : No
>> CLF - Cache Line Flush Support : Yes
>> DS - Debug Trace & EMON Store : Yes
>> ACPI - Software Clock Control : Yes
>> (W)MMX Technology : Yes
>> FXSR - Fast Float Save & Restore : Yes
>> SSE Technology : Yes
>> SSE2 Technology : Yes
>> SS - Self Snoop : Yes
>> HTT - Hyper-Threading Technology : Yes
>> TM - Thermal Monitor : Yes
>> PBE - Pending Break Enable : Yes
>> IA64 Technology : No
>> SSE3 Technology : Yes
>> MON - Monitor/MWait : Yes
>> DSCPL - CPL qualified Debug Store : Yes
>> EST - Enhanced SpeedStep Technology : No
>> TM2 - Thermal Monitor 2 : No
>> CID - Context ID : Yes
>> xTPR - Send Task Priority Messages : Yes
>> DAZ - Denormals Are Zero : Yes
>> Advanced Settings
>> Data Error Checking : No
>> Fast Strings : No
>> x86 FPU Compatibility Mode : No
>> Prefetch Queue : Yes
>> Branch Trace Storage : Yes
>> Data Cache Active Mode : Yes
>> IO Queue Depth : 12 request(s)
>> TM - Thermal Monitor : Yes
>> TM2 - Thermal Monitor 2 : No
>> Specific Platform Requirements : No
>> Control Temperature : 68.0°C / 154.4°F
>> Machine Check Architecture Settings
>> Number of Reporting Banks : 4 bank(s)
>> Extended Machine Check Support : Yes
>> Number of Extended Reporting Banks : 12 bank(s)
>> Variable Range MTRR Settings
>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
>> Fixed Range MTRR Settings
>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
>> PAT Settings
>> PAT 0 : WB
>> PAT 1 : WC
>> PAT 2 : UC-
>> PAT 3 : UC
>> PAT 4 : WB
>> PAT 5 : WC
>> PAT 6 : UC-
>> PAT 7 : UC
>> Performance Tips
>> Notice 224 : SMBIOS/DMI information may be inaccurate.
>>
>>>>> Warning 216 : CPU fan has failed! Check it.
>> Tip 2 : Double-click tip or press Enter while a tip is selected for
>> more information about the tip.



--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

Why not do it the east way and use Winflash to flash from Windoze? Then
all you need is that .bin file... 8-)

Greetz,
Evert

Nils Langeland wrote:
> Thanks Evert.
> Do you have a straight-forward procedure for flashing the BIOS?
> I only find a .bin file on SHUTTLE, but that's not enough for flashing
> from a floppy - or?
>
> Nils
>
> On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie <>
> wrote:
>
>> Does your SB81P has the most recent BIOS? Shuttle has made some
>> changes in the thermal config lately...
>>
>> Regards,
>> Evert
>>
>> Nils Langeland wrote:
>>
>>> Hello,
>>> I have been runnning my SB81P for a wwek now, with no problems.
>>> Then, using SiSoft Sandra 2005, i see the following:
>>> Relevant lines marked with >>>
>>>
>>>>>> Auto Fan Speed Control : No
>>>
>>>
>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>
>>> CPU-Temp is at 55C, so cooling is taking place.
>>> I do feel that the fan is noisy, doesn't seem to alter speed,
>>> running at the same RPM all the time,
>>> Any good advice out there?
>>> Greetings from Nils Langeland
>>> SiSoftware Sandra
>>> Processor
>>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
>>> Speed : 3.22GHz
>>> Performance Rating : PR4276 (estimated)
>>> CPUs per Core : 1 Unit(s)
>>> SMT Support : 2 Unit(s)
>>> Type : Standard
>>> Package : FC LGA775
>>> Rated Speed/FSB : 3200MHz / 4x 200MHz
>>> Multiplier : 16/1x
>>> Minimum/Maximum Multiplier : 2/1x / 16/1x
>>> Generation : G8
>>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
>>> Revision/Stepping : 3 / 4 (0)
>>> Stepping Mask : D0
>>> Microcode : MU0F340E
>>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
>>> Native Page Size : 4kB
>>> Co-Processor (FPU)
>>> Type : Built-in
>>> Revision/Stepping : 3 / 4 (0)
>>> Processor Cache(s)
>>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
>>> byte line size, 2 threads sharing
>>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64
>>> byte line size
>>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
>>> line size, 2 lines per sector, 2 threads sharing
>>> L2 Cache Multiplier : 1/1x (3215MHz)
>>> Upgradeability
>>> Socket/Slot : Socket 478
>>> Upgrade Interface : ZIF Socket
>>> Supported Speed(s) : 3.22GHz+
>>> Environment Monitor 1
>>> Model : ITE IT8705/12 ISA
>>> Mainboard Specific Support : No
>>> Sensors
>>> CPU Temperature : 55.0°C / 131.0°F td
>>>
>>>>>> Auto Fan Speed Control : No
>>>
>>> CPU Fan Speed : 654rpm
>>> CPU Voltage : 1.30V
>>> Features
>>> FPU - Co-Processor Built-in : Yes
>>> VME - Virtual Mode Extensions : Yes
>>> DE - Debugging Extension : Yes
>>> PSE - Page Size Extension : Yes
>>> TSC - Time Stamp Counter : Yes
>>> MSR - Model Specific Registers : Yes
>>> PAE - Physical Address Extension : Yes
>>> MCE - Machine Check Exception : Yes
>>> CX8 - Compare & Exchange Instruction : Yes
>>> APIC - Local APIC Built-in : Yes
>>> SEP - Fast System Call : Yes
>>> MTRR - Memory Type Range Registers : Yes
>>> PGE - Page Global Enable : Yes
>>> MCA - Machine Check Architecture : Yes
>>> PAT - Page Attribute Table : Yes
>>> PSE36 - 36-bit Page Size Extension : Yes
>>> PSN - Unique Serial Number : No
>>> CLF - Cache Line Flush Support : Yes
>>> DS - Debug Trace & EMON Store : Yes
>>> ACPI - Software Clock Control : Yes
>>> (W)MMX Technology : Yes
>>> FXSR - Fast Float Save & Restore : Yes
>>> SSE Technology : Yes
>>> SSE2 Technology : Yes
>>> SS - Self Snoop : Yes
>>> HTT - Hyper-Threading Technology : Yes
>>> TM - Thermal Monitor : Yes
>>> PBE - Pending Break Enable : Yes
>>> IA64 Technology : No
>>> SSE3 Technology : Yes
>>> MON - Monitor/MWait : Yes
>>> DSCPL - CPL qualified Debug Store : Yes
>>> EST - Enhanced SpeedStep Technology : No
>>> TM2 - Thermal Monitor 2 : No
>>> CID - Context ID : Yes
>>> xTPR - Send Task Priority Messages : Yes
>>> DAZ - Denormals Are Zero : Yes
>>> Advanced Settings
>>> Data Error Checking : No
>>> Fast Strings : No
>>> x86 FPU Compatibility Mode : No
>>> Prefetch Queue : Yes
>>> Branch Trace Storage : Yes
>>> Data Cache Active Mode : Yes
>>> IO Queue Depth : 12 request(s)
>>> TM - Thermal Monitor : Yes
>>> TM2 - Thermal Monitor 2 : No
>>> Specific Platform Requirements : No
>>> Control Temperature : 68.0°C / 154.4°F
>>> Machine Check Architecture Settings
>>> Number of Reporting Banks : 4 bank(s)
>>> Extended Machine Check Support : Yes
>>> Number of Extended Reporting Banks : 12 bank(s)
>>> Variable Range MTRR Settings
>>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
>>> Fixed Range MTRR Settings
>>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
>>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
>>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
>>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
>>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
>>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
>>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
>>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
>>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
>>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
>>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
>>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
>>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
>>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
>>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
>>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
>>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
>>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
>>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
>>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
>>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
>>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
>>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
>>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
>>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
>>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
>>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
>>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
>>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
>>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
>>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
>>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
>>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
>>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
>>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
>>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
>>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
>>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
>>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
>>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
>>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
>>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
>>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
>>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
>>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
>>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
>>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
>>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
>>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
>>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
>>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
>>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
>>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
>>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
>>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
>>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
>>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
>>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
>>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
>>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
>>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
>>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
>>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
>>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
>>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
>>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
>>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
>>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
>>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
>>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
>>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
>>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
>>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
>>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
>>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
>>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
>>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
>>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
>>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
>>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
>>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
>>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
>>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
>>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
>>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
>>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
>>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
>>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
>>> PAT Settings
>>> PAT 0 : WB
>>> PAT 1 : WC
>>> PAT 2 : UC-
>>> PAT 3 : UC
>>> PAT 4 : WB
>>> PAT 5 : WC
>>> PAT 6 : UC-
>>> PAT 7 : UC
>>> Performance Tips
>>> Notice 224 : SMBIOS/DMI information may be inaccurate.
>>>
>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>
>>> Tip 2 : Double-click tip or press Enter while a tip is selected for
>>> more information about the tip.
>
>
>
>

Hello, again,
I upgraded the BIOS using WinFlash, went like a breeze, but Sandra still
reports the same thing about fan-failure.
CPU-temperature is on a steady 55.

Are there any settings in the BIOS-setup that would need checking?
Oddly, I'm not able to get the "Num-Lock on at startup" to work, either.
Cheers Nils

On Wed, 05 Jan 2005 10:46:57 +0100, Evert Meulie <>
wrote:

> Why not do it the east way and use Winflash to flash from Windoze? Then
> all you need is that .bin file... 8-)
>
> Greetz,
> Evert
>
> Nils Langeland wrote:
>> Thanks Evert.
>> Do you have a straight-forward procedure for flashing the BIOS?
>> I only find a .bin file on SHUTTLE, but that's not enough for flashing
>> from a floppy - or?
>> Nils
>> On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie <>
>> wrote:
>>
>>> Does your SB81P has the most recent BIOS? Shuttle has made some
>>> changes in the thermal config lately...
>>>
>>> Regards,
>>> Evert
>>>
>>> Nils Langeland wrote:
>>>
>>>> Hello,
>>>> I have been runnning my SB81P for a wwek now, with no problems.
>>>> Then, using SiSoft Sandra 2005, i see the following:
>>>> Relevant lines marked with >>>
>>>>
>>>>>>> Auto Fan Speed Control : No
>>>>
>>>>
>>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>>
>>>> CPU-Temp is at 55C, so cooling is taking place.
>>>> I do feel that the fan is noisy, doesn't seem to alter speed,
>>>> running at the same RPM all the time,
>>>> Any good advice out there?
>>>> Greetings from Nils Langeland
>>>> SiSoftware Sandra
>>>> Processor
>>>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
>>>> Speed : 3.22GHz
>>>> Performance Rating : PR4276 (estimated)
>>>> CPUs per Core : 1 Unit(s)
>>>> SMT Support : 2 Unit(s)
>>>> Type : Standard
>>>> Package : FC LGA775
>>>> Rated Speed/FSB : 3200MHz / 4x 200MHz
>>>> Multiplier : 16/1x
>>>> Minimum/Maximum Multiplier : 2/1x / 16/1x
>>>> Generation : G8
>>>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
>>>> Revision/Stepping : 3 / 4 (0)
>>>> Stepping Mask : D0
>>>> Microcode : MU0F340E
>>>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
>>>> Native Page Size : 4kB
>>>> Co-Processor (FPU)
>>>> Type : Built-in
>>>> Revision/Stepping : 3 / 4 (0)
>>>> Processor Cache(s)
>>>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
>>>> byte line size, 2 threads sharing
>>>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64
>>>> byte line size
>>>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
>>>> line size, 2 lines per sector, 2 threads sharing
>>>> L2 Cache Multiplier : 1/1x (3215MHz)
>>>> Upgradeability
>>>> Socket/Slot : Socket 478
>>>> Upgrade Interface : ZIF Socket
>>>> Supported Speed(s) : 3.22GHz+
>>>> Environment Monitor 1
>>>> Model : ITE IT8705/12 ISA
>>>> Mainboard Specific Support : No
>>>> Sensors
>>>> CPU Temperature : 55.0°C / 131.0°F td
>>>>
>>>>>>> Auto Fan Speed Control : No
>>>>
>>>> CPU Fan Speed : 654rpm
>>>> CPU Voltage : 1.30V
>>>> Features
>>>> FPU - Co-Processor Built-in : Yes
>>>> VME - Virtual Mode Extensions : Yes
>>>> DE - Debugging Extension : Yes
>>>> PSE - Page Size Extension : Yes
>>>> TSC - Time Stamp Counter : Yes
>>>> MSR - Model Specific Registers : Yes
>>>> PAE - Physical Address Extension : Yes
>>>> MCE - Machine Check Exception : Yes
>>>> CX8 - Compare & Exchange Instruction : Yes
>>>> APIC - Local APIC Built-in : Yes
>>>> SEP - Fast System Call : Yes
>>>> MTRR - Memory Type Range Registers : Yes
>>>> PGE - Page Global Enable : Yes
>>>> MCA - Machine Check Architecture : Yes
>>>> PAT - Page Attribute Table : Yes
>>>> PSE36 - 36-bit Page Size Extension : Yes
>>>> PSN - Unique Serial Number : No
>>>> CLF - Cache Line Flush Support : Yes
>>>> DS - Debug Trace & EMON Store : Yes
>>>> ACPI - Software Clock Control : Yes
>>>> (W)MMX Technology : Yes
>>>> FXSR - Fast Float Save & Restore : Yes
>>>> SSE Technology : Yes
>>>> SSE2 Technology : Yes
>>>> SS - Self Snoop : Yes
>>>> HTT - Hyper-Threading Technology : Yes
>>>> TM - Thermal Monitor : Yes
>>>> PBE - Pending Break Enable : Yes
>>>> IA64 Technology : No
>>>> SSE3 Technology : Yes
>>>> MON - Monitor/MWait : Yes
>>>> DSCPL - CPL qualified Debug Store : Yes
>>>> EST - Enhanced SpeedStep Technology : No
>>>> TM2 - Thermal Monitor 2 : No
>>>> CID - Context ID : Yes
>>>> xTPR - Send Task Priority Messages : Yes
>>>> DAZ - Denormals Are Zero : Yes
>>>> Advanced Settings
>>>> Data Error Checking : No
>>>> Fast Strings : No
>>>> x86 FPU Compatibility Mode : No
>>>> Prefetch Queue : Yes
>>>> Branch Trace Storage : Yes
>>>> Data Cache Active Mode : Yes
>>>> IO Queue Depth : 12 request(s)
>>>> TM - Thermal Monitor : Yes
>>>> TM2 - Thermal Monitor 2 : No
>>>> Specific Platform Requirements : No
>>>> Control Temperature : 68.0°C / 154.4°F
>>>> Machine Check Architecture Settings
>>>> Number of Reporting Banks : 4 bank(s)
>>>> Extended Machine Check Support : Yes
>>>> Number of Extended Reporting Banks : 12 bank(s)
>>>> Variable Range MTRR Settings
>>>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
>>>> Fixed Range MTRR Settings
>>>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
>>>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
>>>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
>>>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
>>>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
>>>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
>>>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
>>>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
>>>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
>>>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
>>>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
>>>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
>>>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
>>>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
>>>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
>>>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
>>>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
>>>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
>>>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
>>>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
>>>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
>>>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
>>>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
>>>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
>>>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
>>>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
>>>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
>>>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
>>>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
>>>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
>>>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
>>>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
>>>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
>>>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
>>>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
>>>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
>>>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
>>>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
>>>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
>>>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
>>>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
>>>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
>>>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
>>>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
>>>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
>>>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
>>>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
>>>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
>>>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
>>>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
>>>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
>>>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
>>>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
>>>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
>>>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
>>>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
>>>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
>>>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
>>>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
>>>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
>>>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
>>>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
>>>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
>>>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
>>>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
>>>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
>>>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
>>>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
>>>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
>>>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
>>>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
>>>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
>>>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
>>>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
>>>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
>>>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
>>>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
>>>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
>>>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
>>>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
>>>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
>>>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
>>>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
>>>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
>>>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
>>>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
>>>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
>>>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
>>>> PAT Settings
>>>> PAT 0 : WB
>>>> PAT 1 : WC
>>>> PAT 2 : UC-
>>>> PAT 3 : UC
>>>> PAT 4 : WB
>>>> PAT 5 : WC
>>>> PAT 6 : UC-
>>>> PAT 7 : UC
>>>> Performance Tips
>>>> Notice 224 : SMBIOS/DMI information may be inaccurate.
>>>>
>>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>>
>>>> Tip 2 : Double-click tip or press Enter while a tip is selected for
>>>> more information about the tip.
>>



--
Using Opera's revolutionary e-mail client: http://www.opera.com/mail/

I'll check out Sandra when I get home, and see what it reports on my
SB81P... 8-)



Nils Langeland wrote:
> Hello, again,
> I upgraded the BIOS using WinFlash, went like a breeze, but Sandra
> still reports the same thing about fan-failure.
> CPU-temperature is on a steady 55.
>
> Are there any settings in the BIOS-setup that would need checking?
> Oddly, I'm not able to get the "Num-Lock on at startup" to work, either.
> Cheers Nils
>
> On Wed, 05 Jan 2005 10:46:57 +0100, Evert Meulie <>
> wrote:
>
>> Why not do it the east way and use Winflash to flash from Windoze?
>> Then all you need is that .bin file... 8-)
>>
>> Greetz,
>> Evert
>>
>> Nils Langeland wrote:
>>
>>> Thanks Evert.
>>> Do you have a straight-forward procedure for flashing the BIOS?
>>> I only find a .bin file on SHUTTLE, but that's not enough for
>>> flashing from a floppy - or?
>>> Nils
>>> On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie
>>> <> wrote:
>>>
>>>> Does your SB81P has the most recent BIOS? Shuttle has made some
>>>> changes in the thermal config lately...
>>>>
>>>> Regards,
>>>> Evert
>>>>
>>>> Nils Langeland wrote:
>>>>
>>>>> Hello,
>>>>> I have been runnning my SB81P for a wwek now, with no problems.
>>>>> Then, using SiSoft Sandra 2005, i see the following:
>>>>> Relevant lines marked with >>>
>>>>>
>>>>>>>> Auto Fan Speed Control : No
>>>>>
>>>>>
>>>>>
>>>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>>>
>>>>>
>>>>> CPU-Temp is at 55C, so cooling is taking place.
>>>>> I do feel that the fan is noisy, doesn't seem to alter speed,
>>>>> running at the same RPM all the time,
>>>>> Any good advice out there?
>>>>> Greetings from Nils Langeland
>>>>> SiSoftware Sandra
>>>>> Processor
>>>>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
>>>>> Speed : 3.22GHz
>>>>> Performance Rating : PR4276 (estimated)
>>>>> CPUs per Core : 1 Unit(s)
>>>>> SMT Support : 2 Unit(s)
>>>>> Type : Standard
>>>>> Package : FC LGA775
>>>>> Rated Speed/FSB : 3200MHz / 4x 200MHz
>>>>> Multiplier : 16/1x
>>>>> Minimum/Maximum Multiplier : 2/1x / 16/1x
>>>>> Generation : G8
>>>>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
>>>>> Revision/Stepping : 3 / 4 (0)
>>>>> Stepping Mask : D0
>>>>> Microcode : MU0F340E
>>>>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
>>>>> Native Page Size : 4kB
>>>>> Co-Processor (FPU)
>>>>> Type : Built-in
>>>>> Revision/Stepping : 3 / 4 (0)
>>>>> Processor Cache(s)
>>>>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
>>>>> byte line size, 2 threads sharing
>>>>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set,
>>>>> 64 byte line size
>>>>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
>>>>> line size, 2 lines per sector, 2 threads sharing
>>>>> L2 Cache Multiplier : 1/1x (3215MHz)
>>>>> Upgradeability
>>>>> Socket/Slot : Socket 478
>>>>> Upgrade Interface : ZIF Socket
>>>>> Supported Speed(s) : 3.22GHz+
>>>>> Environment Monitor 1
>>>>> Model : ITE IT8705/12 ISA
>>>>> Mainboard Specific Support : No
>>>>> Sensors
>>>>> CPU Temperature : 55.0°C / 131.0°F td
>>>>>
>>>>>>>> Auto Fan Speed Control : No
>>>>>
>>>>>
>>>>> CPU Fan Speed : 654rpm
>>>>> CPU Voltage : 1.30V
>>>>> Features
>>>>> FPU - Co-Processor Built-in : Yes
>>>>> VME - Virtual Mode Extensions : Yes
>>>>> DE - Debugging Extension : Yes
>>>>> PSE - Page Size Extension : Yes
>>>>> TSC - Time Stamp Counter : Yes
>>>>> MSR - Model Specific Registers : Yes
>>>>> PAE - Physical Address Extension : Yes
>>>>> MCE - Machine Check Exception : Yes
>>>>> CX8 - Compare & Exchange Instruction : Yes
>>>>> APIC - Local APIC Built-in : Yes
>>>>> SEP - Fast System Call : Yes
>>>>> MTRR - Memory Type Range Registers : Yes
>>>>> PGE - Page Global Enable : Yes
>>>>> MCA - Machine Check Architecture : Yes
>>>>> PAT - Page Attribute Table : Yes
>>>>> PSE36 - 36-bit Page Size Extension : Yes
>>>>> PSN - Unique Serial Number : No
>>>>> CLF - Cache Line Flush Support : Yes
>>>>> DS - Debug Trace & EMON Store : Yes
>>>>> ACPI - Software Clock Control : Yes
>>>>> (W)MMX Technology : Yes
>>>>> FXSR - Fast Float Save & Restore : Yes
>>>>> SSE Technology : Yes
>>>>> SSE2 Technology : Yes
>>>>> SS - Self Snoop : Yes
>>>>> HTT - Hyper-Threading Technology : Yes
>>>>> TM - Thermal Monitor : Yes
>>>>> PBE - Pending Break Enable : Yes
>>>>> IA64 Technology : No
>>>>> SSE3 Technology : Yes
>>>>> MON - Monitor/MWait : Yes
>>>>> DSCPL - CPL qualified Debug Store : Yes
>>>>> EST - Enhanced SpeedStep Technology : No
>>>>> TM2 - Thermal Monitor 2 : No
>>>>> CID - Context ID : Yes
>>>>> xTPR - Send Task Priority Messages : Yes
>>>>> DAZ - Denormals Are Zero : Yes
>>>>> Advanced Settings
>>>>> Data Error Checking : No
>>>>> Fast Strings : No
>>>>> x86 FPU Compatibility Mode : No
>>>>> Prefetch Queue : Yes
>>>>> Branch Trace Storage : Yes
>>>>> Data Cache Active Mode : Yes
>>>>> IO Queue Depth : 12 request(s)
>>>>> TM - Thermal Monitor : Yes
>>>>> TM2 - Thermal Monitor 2 : No
>>>>> Specific Platform Requirements : No
>>>>> Control Temperature : 68.0°C / 154.4°F
>>>>> Machine Check Architecture Settings
>>>>> Number of Reporting Banks : 4 bank(s)
>>>>> Extended Machine Check Support : Yes
>>>>> Number of Extended Reporting Banks : 12 bank(s)
>>>>> Variable Range MTRR Settings
>>>>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
>>>>> Fixed Range MTRR Settings
>>>>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
>>>>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
>>>>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
>>>>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
>>>>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
>>>>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
>>>>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
>>>>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
>>>>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
>>>>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
>>>>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
>>>>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
>>>>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
>>>>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
>>>>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
>>>>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
>>>>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
>>>>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
>>>>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
>>>>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
>>>>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
>>>>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
>>>>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
>>>>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
>>>>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
>>>>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
>>>>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
>>>>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
>>>>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
>>>>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
>>>>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
>>>>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
>>>>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
>>>>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
>>>>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
>>>>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
>>>>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
>>>>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
>>>>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
>>>>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
>>>>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
>>>>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
>>>>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
>>>>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
>>>>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
>>>>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
>>>>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
>>>>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
>>>>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
>>>>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
>>>>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
>>>>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
>>>>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
>>>>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
>>>>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
>>>>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
>>>>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
>>>>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
>>>>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
>>>>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
>>>>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
>>>>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
>>>>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
>>>>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
>>>>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
>>>>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
>>>>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
>>>>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
>>>>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
>>>>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
>>>>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
>>>>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
>>>>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
>>>>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
>>>>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
>>>>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
>>>>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
>>>>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
>>>>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
>>>>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
>>>>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
>>>>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
>>>>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
>>>>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
>>>>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
>>>>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
>>>>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
>>>>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
>>>>> PAT Settings
>>>>> PAT 0 : WB
>>>>> PAT 1 : WC
>>>>> PAT 2 : UC-
>>>>> PAT 3 : UC
>>>>> PAT 4 : WB
>>>>> PAT 5 : WC
>>>>> PAT 6 : UC-
>>>>> PAT 7 : UC
>>>>> Performance Tips
>>>>> Notice 224 : SMBIOS/DMI information may be inaccurate.
>>>>>
>>>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>>>
>>>>>
>>>>> Tip 2 : Double-click tip or press Enter while a tip is selected
>>>>> for more information about the tip.
>>>
>>>
>
>
>

Hmm, Sandra reports that the CPI-fan of my SB81P isn't working either,
but I know it is. Looks like Sandra isn't reporting the truth here. If
you have a spare minute, you might wanna report it to them... 8-)

Regards,
Evert

Evert Meulie wrote:
> I'll check out Sandra when I get home, and see what it reports on my
> SB81P... 8-)
>
>
>
> Nils Langeland wrote:
>
>> Hello, again,
>> I upgraded the BIOS using WinFlash, went like a breeze, but Sandra
>> still reports the same thing about fan-failure.
>> CPU-temperature is on a steady 55.
>>
>> Are there any settings in the BIOS-setup that would need checking?
>> Oddly, I'm not able to get the "Num-Lock on at startup" to work, either.
>> Cheers Nils
>>
>> On Wed, 05 Jan 2005 10:46:57 +0100, Evert Meulie <>
>> wrote:
>>
>>> Why not do it the east way and use Winflash to flash from Windoze?
>>> Then all you need is that .bin file... 8-)
>>>
>>> Greetz,
>>> Evert
>>>
>>> Nils Langeland wrote:
>>>
>>>> Thanks Evert.
>>>> Do you have a straight-forward procedure for flashing the BIOS?
>>>> I only find a .bin file on SHUTTLE, but that's not enough for
>>>> flashing from a floppy - or?
>>>> Nils
>>>> On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie
>>>> <> wrote:
>>>>
>>>>> Does your SB81P has the most recent BIOS? Shuttle has made some
>>>>> changes in the thermal config lately...
>>>>>
>>>>> Regards,
>>>>> Evert
>>>>>
>>>>> Nils Langeland wrote:
>>>>>
>>>>>> Hello,
>>>>>> I have been runnning my SB81P for a wwek now, with no problems.
>>>>>> Then, using SiSoft Sandra 2005, i see the following:
>>>>>> Relevant lines marked with >>>
>>>>>>
>>>>>>>>> Auto Fan Speed Control : No
>>>>>>
>>>>>>
>>>>>>
>>>>>>
>>>>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>>>>
>>>>>>
>>>>>>
>>>>>> CPU-Temp is at 55C, so cooling is taking place.
>>>>>> I do feel that the fan is noisy, doesn't seem to alter speed,
>>>>>> running at the same RPM all the time,
>>>>>> Any good advice out there?
>>>>>> Greetings from Nils Langeland
>>>>>> SiSoftware Sandra
>>>>>> Processor
>>>>>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
>>>>>> Speed : 3.22GHz
>>>>>> Performance Rating : PR4276 (estimated)
>>>>>> CPUs per Core : 1 Unit(s)
>>>>>> SMT Support : 2 Unit(s)
>>>>>> Type : Standard
>>>>>> Package : FC LGA775
>>>>>> Rated Speed/FSB : 3200MHz / 4x 200MHz
>>>>>> Multiplier : 16/1x
>>>>>> Minimum/Maximum Multiplier : 2/1x / 16/1x
>>>>>> Generation : G8
>>>>>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
>>>>>> Revision/Stepping : 3 / 4 (0)
>>>>>> Stepping Mask : D0
>>>>>> Microcode : MU0F340E
>>>>>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
>>>>>> Native Page Size : 4kB
>>>>>> Co-Processor (FPU)
>>>>>> Type : Built-in
>>>>>> Revision/Stepping : 3 / 4 (0)
>>>>>> Processor Cache(s)
>>>>>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
>>>>>> byte line size, 2 threads sharing
>>>>>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set,
>>>>>> 64 byte line size
>>>>>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
>>>>>> line size, 2 lines per sector, 2 threads sharing
>>>>>> L2 Cache Multiplier : 1/1x (3215MHz)
>>>>>> Upgradeability
>>>>>> Socket/Slot : Socket 478
>>>>>> Upgrade Interface : ZIF Socket
>>>>>> Supported Speed(s) : 3.22GHz+
>>>>>> Environment Monitor 1
>>>>>> Model : ITE IT8705/12 ISA
>>>>>> Mainboard Specific Support : No
>>>>>> Sensors
>>>>>> CPU Temperature : 55.0°C / 131.0°F td
>>>>>>
>>>>>>>>> Auto Fan Speed Control : No
>>>>>>
>>>>>>
>>>>>>
>>>>>> CPU Fan Speed : 654rpm
>>>>>> CPU Voltage : 1.30V
>>>>>> Features
>>>>>> FPU - Co-Processor Built-in : Yes
>>>>>> VME - Virtual Mode Extensions : Yes
>>>>>> DE - Debugging Extension : Yes
>>>>>> PSE - Page Size Extension : Yes
>>>>>> TSC - Time Stamp Counter : Yes
>>>>>> MSR - Model Specific Registers : Yes
>>>>>> PAE - Physical Address Extension : Yes
>>>>>> MCE - Machine Check Exception : Yes
>>>>>> CX8 - Compare & Exchange Instruction : Yes
>>>>>> APIC - Local APIC Built-in : Yes
>>>>>> SEP - Fast System Call : Yes
>>>>>> MTRR - Memory Type Range Registers : Yes
>>>>>> PGE - Page Global Enable : Yes
>>>>>> MCA - Machine Check Architecture : Yes
>>>>>> PAT - Page Attribute Table : Yes
>>>>>> PSE36 - 36-bit Page Size Extension : Yes
>>>>>> PSN - Unique Serial Number : No
>>>>>> CLF - Cache Line Flush Support : Yes
>>>>>> DS - Debug Trace & EMON Store : Yes
>>>>>> ACPI - Software Clock Control : Yes
>>>>>> (W)MMX Technology : Yes
>>>>>> FXSR - Fast Float Save & Restore : Yes
>>>>>> SSE Technology : Yes
>>>>>> SSE2 Technology : Yes
>>>>>> SS - Self Snoop : Yes
>>>>>> HTT - Hyper-Threading Technology : Yes
>>>>>> TM - Thermal Monitor : Yes
>>>>>> PBE - Pending Break Enable : Yes
>>>>>> IA64 Technology : No
>>>>>> SSE3 Technology : Yes
>>>>>> MON - Monitor/MWait : Yes
>>>>>> DSCPL - CPL qualified Debug Store : Yes
>>>>>> EST - Enhanced SpeedStep Technology : No
>>>>>> TM2 - Thermal Monitor 2 : No
>>>>>> CID - Context ID : Yes
>>>>>> xTPR - Send Task Priority Messages : Yes
>>>>>> DAZ - Denormals Are Zero : Yes
>>>>>> Advanced Settings
>>>>>> Data Error Checking : No
>>>>>> Fast Strings : No
>>>>>> x86 FPU Compatibility Mode : No
>>>>>> Prefetch Queue : Yes
>>>>>> Branch Trace Storage : Yes
>>>>>> Data Cache Active Mode : Yes
>>>>>> IO Queue Depth : 12 request(s)
>>>>>> TM - Thermal Monitor : Yes
>>>>>> TM2 - Thermal Monitor 2 : No
>>>>>> Specific Platform Requirements : No
>>>>>> Control Temperature : 68.0°C / 154.4°F
>>>>>> Machine Check Architecture Settings
>>>>>> Number of Reporting Banks : 4 bank(s)
>>>>>> Extended Machine Check Support : Yes
>>>>>> Number of Extended Reporting Banks : 12 bank(s)
>>>>>> Variable Range MTRR Settings
>>>>>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
>>>>>> Fixed Range MTRR Settings
>>>>>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
>>>>>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
>>>>>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
>>>>>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
>>>>>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
>>>>>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
>>>>>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
>>>>>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
>>>>>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
>>>>>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
>>>>>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
>>>>>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
>>>>>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
>>>>>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
>>>>>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
>>>>>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
>>>>>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
>>>>>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
>>>>>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
>>>>>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
>>>>>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
>>>>>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
>>>>>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
>>>>>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
>>>>>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
>>>>>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
>>>>>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
>>>>>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
>>>>>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
>>>>>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
>>>>>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
>>>>>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
>>>>>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
>>>>>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
>>>>>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
>>>>>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
>>>>>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
>>>>>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
>>>>>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
>>>>>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
>>>>>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
>>>>>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
>>>>>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
>>>>>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
>>>>>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
>>>>>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
>>>>>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
>>>>>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
>>>>>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
>>>>>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
>>>>>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
>>>>>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
>>>>>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
>>>>>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
>>>>>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
>>>>>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
>>>>>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
>>>>>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
>>>>>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
>>>>>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
>>>>>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
>>>>>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
>>>>>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
>>>>>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
>>>>>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
>>>>>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
>>>>>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
>>>>>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
>>>>>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
>>>>>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
>>>>>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
>>>>>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
>>>>>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
>>>>>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
>>>>>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
>>>>>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
>>>>>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
>>>>>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
>>>>>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
>>>>>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
>>>>>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
>>>>>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
>>>>>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
>>>>>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
>>>>>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
>>>>>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
>>>>>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
>>>>>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
>>>>>> PAT Settings
>>>>>> PAT 0 : WB
>>>>>> PAT 1 : WC
>>>>>> PAT 2 : UC-
>>>>>> PAT 3 : UC
>>>>>> PAT 4 : WB
>>>>>> PAT 5 : WC
>>>>>> PAT 6 : UC-
>>>>>> PAT 7 : UC
>>>>>> Performance Tips
>>>>>> Notice 224 : SMBIOS/DMI information may be inaccurate.
>>>>>>
>>>>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>>>>
>>>>>>
>>>>>>
>>>>>> Tip 2 : Double-click tip or press Enter while a tip is selected
>>>>>> for more information about the tip.
>>>>
>>>>
>>>>
>>
>>
>>

Here's the answer from SiSoft Sandra. Now, I don't know how to detect which
fans are reported as what. Anyone out there able to help?



Nils

************************************************** ***

Answer fron SiSoftSandra Support:

There is no way to know in software which fan is which, which temperature is
which and so on; the program assumes the implementation guidelines of the
specific hardware monitor device are followed by the manufacturer.

You cannot compare the customised version of the monitoring application
supplied with the board (they make it so they should know which is which)
with a generic program like Sandra that runs on thousands of different
boards. This affects other such utilities that generally ask you to tell
them which sensor is which - Sandra attempts to do this automatically.

The Sandra database already contains a patch table for around 700 mainboards
that are non-confirmant and need to be patched; naturally we cannot buy and
test each and every board on the market. If you send us a copy of the output
of "Mainboard Info" and tell us which fans/temperature/voltage sensors are
which we will add it to the patch table.



Thank you.

--

C. Adrian Silasi

SiSoftware (EU)



http://www.sisoftware.net

*Other brands and names are the property of their respective owners.

NB: Be sure to include prior emails in your reply or we may not be able to
help you. We receive many emails per day and need all the information in
front of us.

Email: Please remember that email is not entirely reliable. Please ask for
read/receive confirmation and send one in return. Do resend any email
unanswered within a reasonable amount of time. Ensure that the reply-to
address is valid and operational.

Non-Disclosure: Please do not publish or quote any parts of this message
without authorisation. Unless otherwise specified, this message is not meant
for publication or quotation.

Confidentiality: If you are not the intended recipient, you must not read
this message nor cause its contents to be disclosed to anyone else. If you
receive this email in error, please advise us immediately and delete the
email.

Attachments: We have taken every reasonable precaution to ensure that any
attachment to this email has been swept for viruses. However, we cannot
accept liability for any damage sustained as a result of viruses and would
advise that you carry out your own virus checks before opening any
attachment.







-----Original Message-----

From: Nils Langeland [private.php?do=newpm&u=]

Sent: 10 January 2005 19:33

To:

Subject: Query



Hello,

I have been runnning my SHUTTLE SB81P for a week now, with no problems.

Then, using SiSoft Sandra 2005, I see the following: Relevant lines marked

with >>>

>>> Auto Fan Speed Control : No

>>> Warning 216 : CPU fan has failed! Check it.

CPU-Temp is at 55C, so cooling is taking place.

I do feel that the fan is noisy, doesn't seem to alter speed, running at

the same RPM all the time,

Is there a bug in the program, so that it gives these messages? The CPUfan

IS running, and doing its job CPUtemperature is at 55C

Greetings from Nils Langeland







SiSoftware Sandra

Processor

Model : Intel(R) Pentium(R) 4 CPU 3.20GHz

Speed : 3.22GHz

Performance Rating : PR4276 (estimated)

CPUs per Core : 1 Unit(s)

SMT Support : 2 Unit(s)

Type : Standard

Package : FC LGA775

Rated Speed/FSB : 3200MHz / 4x 200MHz

Multiplier : 16/1x

Minimum/Maximum Multiplier : 2/1x / 16/1x

Generation : G8

Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V Revision/Stepping

: 3 / 4 (0) Stepping Mask : D0 Microcode : MU0F340E Maximum Physical /

Virtual Addressing : 36-bit / 32-bit Native Page Size : 4kB

Co-Processor (FPU)

Type : Built-in

Revision/Stepping : 3 / 4 (0)

Processor Cache(s)

Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64 byte

line size, 2 threads sharing

Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64 byte

line size

L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte line

size, 2 lines per sector, 2 threads sharing

L2 Cache Multiplier : 1/1x (3215MHz)

Upgradeability

Socket/Slot : Socket 478

Upgrade Interface : ZIF Socket

Supported Speed(s) : 3.22GHz+

Environment Monitor 1

Model : ITE IT8705/12 ISA

Mainboard Specific Support : No

Sensors

CPU Temperature : 55.0°C / 131.0°F td

>>> Auto Fan Speed Control : No

CPU Fan Speed : 654rpm

CPU Voltage : 1.30V

Features

FPU - Co-Processor Built-in : Yes

VME - Virtual Mode Extensions : Yes

DE - Debugging Extension : Yes

PSE - Page Size Extension : Yes

TSC - Time Stamp Counter : Yes

MSR - Model Specific Registers : Yes

PAE - Physical Address Extension : Yes

MCE - Machine Check Exception : Yes

CX8 - Compare & Exchange Instruction : Yes

APIC - Local APIC Built-in : Yes

SEP - Fast System Call : Yes

MTRR - Memory Type Range Registers : Yes

PGE - Page Global Enable : Yes

MCA - Machine Check Architecture : Yes

PAT - Page Attribute Table : Yes

PSE36 - 36-bit Page Size Extension : Yes

PSN - Unique Serial Number : No

CLF - Cache Line Flush Support : Yes

DS - Debug Trace & EMON Store : Yes

ACPI - Software Clock Control : Yes

(W)MMX Technology : Yes

FXSR - Fast Float Save & Restore : Yes

SSE Technology : Yes

SSE2 Technology : Yes

SS - Self Snoop : Yes

HTT - Hyper-Threading Technology : Yes

TM - Thermal Monitor : Yes

PBE - Pending Break Enable : Yes

IA64 Technology : No

SSE3 Technology : Yes

MON - Monitor/MWait : Yes

DSCPL - CPL qualified Debug Store : Yes

EST - Enhanced SpeedStep Technology : No

TM2 - Thermal Monitor 2 : No

CID - Context ID : Yes

xTPR - Send Task Priority Messages : Yes

DAZ - Denormals Are Zero : Yes

Advanced Settings

Data Error Checking : No

Fast Strings : No

x86 FPU Compatibility Mode : No

Prefetch Queue : Yes

Branch Trace Storage : Yes

Data Cache Active Mode : Yes

IO Queue Depth : 12 request(s)

TM - Thermal Monitor : Yes

TM2 - Thermal Monitor 2 : No

Specific Platform Requirements : No

Control Temperature : 68.0°C / 154.4°F

Machine Check Architecture Settings

Number of Reporting Banks : 4 bank(s)

Extended Machine Check Support : Yes

Number of Extended Reporting Banks : 12 bank(s)

Variable Range MTRR Settings

MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB

Fixed Range MTRR Settings

MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB

MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB

MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB

MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB

MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB

MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB

MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB

MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB

MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB

MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB

MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB

MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB

MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB

MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB

MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB

MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB

MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC

MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC

MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC

MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC

MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC

MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC

MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC

MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC

MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC

MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC

MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC

MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC

MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC

MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC

MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC

MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC

MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC

MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC

MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC

MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC

MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC

MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC

MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC

MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC

MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC

MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC

MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC

MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC

MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC

MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC

MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC

MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC

MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC

MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC

MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC

MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC

MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC

MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC

MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC

MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC

MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC

MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC

MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC

MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC

MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC

MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC

MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC

MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC

MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC

MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC

MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC

MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC

MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC

MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC

MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC

MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC

MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT

MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT

MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT

MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT

MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT

MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT

MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT

MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT

MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT

MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT

MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT

MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT

MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT

MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT

MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT

MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT

PAT Settings

PAT 0 : WB

PAT 1 : WC

PAT 2 : UC-

PAT 3 : UC

PAT 4 : WB

PAT 5 : WC

PAT 6 : UC-

PAT 7 : UC

Performance Tips

Notice 224 : SMBIOS/DMI information may be inaccurate.

>>> Warning 216 : CPU fan has failed! Check it.

Tip 2 : Double-click tip or press Enter while a tip is selected for more

information about the tip.







"Evert Meulie" <> skrev i melding
news:f3o9b2-...
> Hmm, Sandra reports that the CPI-fan of my SB81P isn't working either, but
> I know it is. Looks like Sandra isn't reporting the truth here. If you
> have a spare minute, you might wanna report it to them... 8-)
>
> Regards,
> Evert
>
> Evert Meulie wrote:
>> I'll check out Sandra when I get home, and see what it reports on my
>> SB81P... 8-)
>>
>>
>>
>> Nils Langeland wrote:
>>
>>> Hello, again,
>>> I upgraded the BIOS using WinFlash, went like a breeze, but Sandra still
>>> reports the same thing about fan-failure.
>>> CPU-temperature is on a steady 55.
>>>
>>> Are there any settings in the BIOS-setup that would need checking?
>>> Oddly, I'm not able to get the "Num-Lock on at startup" to work, either.
>>> Cheers Nils
>>>
>>> On Wed, 05 Jan 2005 10:46:57 +0100, Evert Meulie <>
>>> wrote:
>>>
>>>> Why not do it the east way and use Winflash to flash from Windoze? Then
>>>> all you need is that .bin file... 8-)
>>>>
>>>> Greetz,
>>>> Evert
>>>>
>>>> Nils Langeland wrote:
>>>>
>>>>> Thanks Evert.
>>>>> Do you have a straight-forward procedure for flashing the BIOS?
>>>>> I only find a .bin file on SHUTTLE, but that's not enough for flashing
>>>>> from a floppy - or?
>>>>> Nils
>>>>> On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie <>
>>>>> wrote:
>>>>>
>>>>>> Does your SB81P has the most recent BIOS? Shuttle has made some
>>>>>> changes in the thermal config lately...
>>>>>>
>>>>>> Regards,
>>>>>> Evert
>>>>>>
>>>>>> Nils Langeland wrote:
>>>>>>
>>>>>>> Hello,
>>>>>>> I have been runnning my SB81P for a wwek now, with no problems.
>>>>>>> Then, using SiSoft Sandra 2005, i see the following:
>>>>>>> Relevant lines marked with >>>
>>>>>>>
>>>>>>>>>> Auto Fan Speed Control : No
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> CPU-Temp is at 55C, so cooling is taking place.
>>>>>>> I do feel that the fan is noisy, doesn't seem to alter speed,
>>>>>>> running at the same RPM all the time,
>>>>>>> Any good advice out there?
>>>>>>> Greetings from Nils Langeland
>>>>>>> SiSoftware Sandra
>>>>>>> Processor
>>>>>>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
>>>>>>> Speed : 3.22GHz
>>>>>>> Performance Rating : PR4276 (estimated)
>>>>>>> CPUs per Core : 1 Unit(s)
>>>>>>> SMT Support : 2 Unit(s)
>>>>>>> Type : Standard
>>>>>>> Package : FC LGA775
>>>>>>> Rated Speed/FSB : 3200MHz / 4x 200MHz
>>>>>>> Multiplier : 16/1x
>>>>>>> Minimum/Maximum Multiplier : 2/1x / 16/1x
>>>>>>> Generation : G8
>>>>>>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
>>>>>>> Revision/Stepping : 3 / 4 (0)
>>>>>>> Stepping Mask : D0
>>>>>>> Microcode : MU0F340E
>>>>>>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
>>>>>>> Native Page Size : 4kB
>>>>>>> Co-Processor (FPU)
>>>>>>> Type : Built-in
>>>>>>> Revision/Stepping : 3 / 4 (0)
>>>>>>> Processor Cache(s)
>>>>>>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
>>>>>>> byte line size, 2 threads sharing
>>>>>>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64
>>>>>>> byte line size
>>>>>>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
>>>>>>> line size, 2 lines per sector, 2 threads sharing
>>>>>>> L2 Cache Multiplier : 1/1x (3215MHz)
>>>>>>> Upgradeability
>>>>>>> Socket/Slot : Socket 478
>>>>>>> Upgrade Interface : ZIF Socket
>>>>>>> Supported Speed(s) : 3.22GHz+
>>>>>>> Environment Monitor 1
>>>>>>> Model : ITE IT8705/12 ISA
>>>>>>> Mainboard Specific Support : No
>>>>>>> Sensors
>>>>>>> CPU Temperature : 55.0°C / 131.0°F td
>>>>>>>
>>>>>>>>>> Auto Fan Speed Control : No
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> CPU Fan Speed : 654rpm
>>>>>>> CPU Voltage : 1.30V
>>>>>>> Features
>>>>>>> FPU - Co-Processor Built-in : Yes
>>>>>>> VME - Virtual Mode Extensions : Yes
>>>>>>> DE - Debugging Extension : Yes
>>>>>>> PSE - Page Size Extension : Yes
>>>>>>> TSC - Time Stamp Counter : Yes
>>>>>>> MSR - Model Specific Registers : Yes
>>>>>>> PAE - Physical Address Extension : Yes
>>>>>>> MCE - Machine Check Exception : Yes
>>>>>>> CX8 - Compare & Exchange Instruction : Yes
>>>>>>> APIC - Local APIC Built-in : Yes
>>>>>>> SEP - Fast System Call : Yes
>>>>>>> MTRR - Memory Type Range Registers : Yes
>>>>>>> PGE - Page Global Enable : Yes
>>>>>>> MCA - Machine Check Architecture : Yes
>>>>>>> PAT - Page Attribute Table : Yes
>>>>>>> PSE36 - 36-bit Page Size Extension : Yes
>>>>>>> PSN - Unique Serial Number : No
>>>>>>> CLF - Cache Line Flush Support : Yes
>>>>>>> DS - Debug Trace & EMON Store : Yes
>>>>>>> ACPI - Software Clock Control : Yes
>>>>>>> (W)MMX Technology : Yes
>>>>>>> FXSR - Fast Float Save & Restore : Yes
>>>>>>> SSE Technology : Yes
>>>>>>> SSE2 Technology : Yes
>>>>>>> SS - Self Snoop : Yes
>>>>>>> HTT - Hyper-Threading Technology : Yes
>>>>>>> TM - Thermal Monitor : Yes
>>>>>>> PBE - Pending Break Enable : Yes
>>>>>>> IA64 Technology : No
>>>>>>> SSE3 Technology : Yes
>>>>>>> MON - Monitor/MWait : Yes
>>>>>>> DSCPL - CPL qualified Debug Store : Yes
>>>>>>> EST - Enhanced SpeedStep Technology : No
>>>>>>> TM2 - Thermal Monitor 2 : No
>>>>>>> CID - Context ID : Yes
>>>>>>> xTPR - Send Task Priority Messages : Yes
>>>>>>> DAZ - Denormals Are Zero : Yes
>>>>>>> Advanced Settings
>>>>>>> Data Error Checking : No
>>>>>>> Fast Strings : No
>>>>>>> x86 FPU Compatibility Mode : No
>>>>>>> Prefetch Queue : Yes
>>>>>>> Branch Trace Storage : Yes
>>>>>>> Data Cache Active Mode : Yes
>>>>>>> IO Queue Depth : 12 request(s)
>>>>>>> TM - Thermal Monitor : Yes
>>>>>>> TM2 - Thermal Monitor 2 : No
>>>>>>> Specific Platform Requirements : No
>>>>>>> Control Temperature : 68.0°C / 154.4°F
>>>>>>> Machine Check Architecture Settings
>>>>>>> Number of Reporting Banks : 4 bank(s)
>>>>>>> Extended Machine Check Support : Yes
>>>>>>> Number of Extended Reporting Banks : 12 bank(s)
>>>>>>> Variable Range MTRR Settings
>>>>>>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
>>>>>>> Fixed Range MTRR Settings
>>>>>>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
>>>>>>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
>>>>>>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
>>>>>>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
>>>>>>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
>>>>>>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
>>>>>>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
>>>>>>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
>>>>>>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
>>>>>>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
>>>>>>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
>>>>>>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
>>>>>>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
>>>>>>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
>>>>>>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
>>>>>>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
>>>>>>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
>>>>>>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
>>>>>>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
>>>>>>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
>>>>>>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
>>>>>>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
>>>>>>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
>>>>>>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
>>>>>>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
>>>>>>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
>>>>>>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
>>>>>>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
>>>>>>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
>>>>>>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
>>>>>>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
>>>>>>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
>>>>>>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
>>>>>>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
>>>>>>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
>>>>>>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
>>>>>>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
>>>>>>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
>>>>>>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
>>>>>>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
>>>>>>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
>>>>>>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
>>>>>>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
>>>>>>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
>>>>>>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
>>>>>>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
>>>>>>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
>>>>>>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
>>>>>>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
>>>>>>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
>>>>>>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
>>>>>>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
>>>>>>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
>>>>>>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
>>>>>>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
>>>>>>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
>>>>>>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
>>>>>>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
>>>>>>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
>>>>>>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
>>>>>>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
>>>>>>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
>>>>>>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
>>>>>>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
>>>>>>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
>>>>>>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
>>>>>>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
>>>>>>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
>>>>>>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
>>>>>>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
>>>>>>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
>>>>>>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
>>>>>>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
>>>>>>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
>>>>>>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
>>>>>>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
>>>>>>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
>>>>>>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
>>>>>>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
>>>>>>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
>>>>>>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
>>>>>>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
>>>>>>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
>>>>>>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
>>>>>>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
>>>>>>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
>>>>>>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
>>>>>>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
>>>>>>> PAT Settings
>>>>>>> PAT 0 : WB
>>>>>>> PAT 1 : WC
>>>>>>> PAT 2 : UC-
>>>>>>> PAT 3 : UC
>>>>>>> PAT 4 : WB
>>>>>>> PAT 5 : WC
>>>>>>> PAT 6 : UC-
>>>>>>> PAT 7 : UC
>>>>>>> Performance Tips
>>>>>>> Notice 224 : SMBIOS/DMI information may be inaccurate.
>>>>>>>
>>>>>>>>>> Warning 216 : CPU fan has failed! Check it.
>>>>>>>
>>>>>>>
>>>>>>>
>>>>>>> Tip 2 : Double-click tip or press Enter while a tip is selected for
>>>>>>> more information about the tip.
>>>>>
>>>>>
>>>>>
>>>
>>>
>>>