Motherboard Forums


Reply
Thread Tools Display Modes

SS20 and SCA disk problem (not SDA...)

 
 
Ripley
Guest
Posts: n/a
 
      09-02-2003, 08:20 PM
Hi,
A friend of mine gave me SS20 with a super-noisy HD (even my dogs
bark at it...). Now, I have three Quantum Viking 4.5 SCA (in exchange of a
to high disk I bought for 60$), but only two in the SS20. Open boot can see
them, even Solaris8, but I'm unable to format them. I installed Linux on
the noisy disk (I use linux, but when the disk will work, I'll probably
switch to Solaris) and there is no differences.

When I start linux, the disks get detect. in dmesg, I get


[...]
scsi0 : Sparc ESP100A-FAST
scsi : 1 host.
Vendor: SEAGATE Model: ST32550N Rev: 0021
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sda at scsi0, channel 0, id 0, lun 0
Vendor: QUANTUM Model: VIKING 4.5 SCA Rev: 8600
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdb at scsi0, channel 0, id 1, lun 0
Vendor: QUANTUM Model: VIKING 4.5 SCA Rev: 8600
Type: Direct-Access ANSI SCSI revision: 02
Detected scsi disk sdc at scsi0, channel 0, id 3, lun 0
scsi : detected 3 SCSI disks total.
esp0: target 0 [period 100ns offset 15 10.00MHz FAST SCSI-II]
SCSI device sda: hdwr sector= 512 bytes. Sectors= 4194058 [2047 MB] [2.0 GB]
esp0: target 1 [period 100ns offset 15 10.00MHz FAST SCSI-II]
sdb : READ CAPACITY failed.
sdb : status = 0, message = 00, host = 0, driver = 28
sdb : extended sense code = 4
sdb : block size assumed to be 512 bytes, disk size 1GB.
esp0: target 3 [period 100ns offset 15 10.00MHz FAST SCSI-II]
sdc : READ CAPACITY failed.
sdc : status = 0, message = 00, host = 0, driver = 28
sdc : extended sense code = 4
sdc : block size assumed to be 512 bytes, disk size 1GB.
[...]


When I try fdisk /dev/sd[bc], I get

SCSI disk error : host 0 channel 0 id 1 lun 0 return code = 28000000
[valid=0] Info fld=0x0, Current sd08:10: sns = 70 4
ASC= 9 ASCQ=f8
Raw sense data:0x70 0x00 0x04 0x00 0x00 0x00 0x00 0x0a 0x00 0x00 0x00 0x00
0x09
scsidisk I/O error: dev 08:10, sector 0

Unable to read /dev/sdb

Sinse I'm not an expert and my friend is gone for at lease a mounth or two,
I don't realy know what to do. I'd like to make those disk work and use my
SS20, I don't like to see a dual CPU standing there and doing nothing )

Thankx for helping,

Ripley
 
Reply With Quote
 
 
 
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
SCA hard drive questions Katz Sun Hardware 6 05-25-2006 07:39 PM
SS10 with an SCA drive Kurt Nowak Sun Hardware 2 02-04-2005 10:47 PM
internal sca cable? Adam Barr Sun Hardware 4 09-06-2004 12:06 PM
Ultra 2 & Maxtor Atlas 10K IV 36.7GB U320 3.5LP 8MB 4.3MS 10K RPM SCA Andrew Tyson Sun Hardware 0 09-19-2003 05:11 AM
SS20 and SDA disk problem Ripley Sun Hardware 2 09-10-2003 04:01 AM


All times are GMT. The time now is 02:46 PM.


Welcome!
Welcome to Motherboard Point
 

Advertisment