Startup problem with DL560

Hi everyone,

I was using my DL560 and in the last day I'm getting a very strange
problem.
Considering that I've never added hardware and/or opened the server: 1
seconds
after that I've pushed "start" button, the server stops itself and
the so called
"External health LED (power supply)" goes on red.
Following manual pages, in order to get diagnostic information by
mother boards leds, I've opened the server and discovered
that there are the four leds of "processor failure" on amber color.
So the firts question is: is it a problem o power supply or a problem
of
processors? Thake in mind that i've 4 processors 2.5 gh and 4Gb Ram.
Is really really strange that all 4 processors breaks in the same
time!
Changing power supply (I've 2 ps) the problems remains and also
detaching hd scsi no changes will appears.
Going into iLo diagnostic i see that there are no post error and all
diagnostics on hardware return "passed".
It's a really mistery!
Anyone can help me??
I can suppose that an hardware reset will be a good pill for my
server, but how to attain it?
I've not seen jumpers on mother boards that do it, and through iLo
is impossible because it implements just a 'system reset' button
when the server is 'on'

Really really thanks a lot in advance.
Regards
Francesco

"Fra" <> wrote
> Hi everyone,
>
> I was using my DL560 and in the last day I'm getting a very strange
> problem.

Ring HP and get them to do a diagnostic on the phone.