![]() |
|
|||||||
![]() |
|
|
Thread Tools | Search this Thread | Display Modes |
|
#1
|
|||
|
|
|||
|
Three days ago i wrote this message:
>My configuration is : >ECS L7S7A2 >AMD 2000+ >256 MB DDR PC2700 >CREATIVE GeForce4 Ti4600 128 Mega >HD 80 giga SEAGATE >When i try to install win xp with optimal configuration the sistem >hang on the first install chnage screen (when the installation request >if you want to install a new xp installation or replace an exists) >If I remove the 2 level chace in the bios , the system arrive at the >34 minutes screen but when i set the keyboard and the international >setting the system hang with a variety of error , such as 0x7a >kernel_data_inpage_error, bad_pool_request >Why ? I have install the last bios update , if anyone have the some >problem please give me a trick to resolve it. The MS resource Kit >can't help me anymore... First of all , thanks for everyone have response to my old msg , i made memory test on my board , i check my hd drive and all device are good. I think the system is instable , because if i decrease the velocy to 100/100 mhz the system hang on 34 minutes xp installation . Anyone have a trick to ask to me for resolve my problem..... Can anyone tell my the right and secure configuration for run my pc without hang installation... Please Help me..... |
|
#2
|
|||
|
|
|||
|
"Giuseppe" <> schreef in bericht news: om... > Three days ago i wrote this message: > >My configuration is : > >ECS L7S7A2 > >AMD 2000+ > >256 MB DDR PC2700 > >CREATIVE GeForce4 Ti4600 128 Mega > >HD 80 giga SEAGATE > > >When i try to install win xp with optimal configuration the sistem > >hang on the first install chnage screen (when the installation > request > >if you want to install a new xp installation or replace an exists) > >If I remove the 2 level chace in the bios , the system arrive at the > >34 minutes screen but when i set the keyboard and the international > >setting the system hang with a variety of error , such as 0x7a > >kernel_data_inpage_error, bad_pool_request > > *I had thesame error on a MSI 745 during installation of XP, according to microsoft that error is caused by bad ram or a bad memoryslot, i knew the memorystick i used was ok,,so i put it in another memoryslot,,and poof,,everything went fine from then,,sure worth a try. good luck Sus |