![]() |
|
#1
|
|||
|
|
|||
|
I have a K7S5A board and am using Win98.
Problem I am having is that I cannot get my microphone to work properly. With the mute box for the microphone on the control panel unchecked, I can hear (thru the speakers) what I say into the microphone. However, when I try to record my voice using Sound Recorder I get nothing. I have reinstalled Sound Recorder, reinstalled the SiS 7012 audio drivers. Anyone have any other ideas for fixing this problem? |
|
#2
|
|||
|
|
|||
|
"Les" wrote:
> Problem I am having is that I cannot get my microphone to work > properly. With the mute box for the microphone on the control panel > unchecked, I can hear (thru the speakers) what I say into the > microphone. However, when I try to record my voice using Sound > Recorder I get nothing. Open Volume Control, go to Options, Properties, under "Adjust volume for" select Recording, under "Show the following volume controls" make sure Microphone is ticked, then click OK. Volume Control should change to Recording Control, tick the box to select Microphone as the recording source. Try recording. If level is too low, select Advanced and tick the Microphone Boost box under "Other Controls". Hope that helps. RL |
|
#3
|
|||
|
|
|||
|
Thank you all for your help. Going to the recording side of Volume
Control and selecting microphone did the trick ![]() |
|
#4
|
|||
|
|
|||
|
"Les" wrote:
> Thank you all for your help. Going to the recording side of Volume > Control and selecting microphone did the trick ![]() Glad to be of service )RL |