Problem Booting with SB61G2

Recently got a SB61G2 case, replacing my SS51g case. However, having
problems getting the system to boot. The Intel Inside P4 screen shows,
then the PCI device listing screen comes up, then I get a screen
saying "we apologize for the inconvenience, but windows did not start
successfully..." I select either Safe Mode or Start Windows Normally
and 3 seconds later the system reboots.

I have tried to get rid of Hard Disk Boot in BIOS, and start from
CDROM, but this Windows screen still pops up. I cannot get it to boot
from the XP Cd. All settings are "auto detect" including memory, cpu
clock speed, etc.

This is really frustrating as the system will not boot without
restarting. Any ideas?

SB61G2
Corsair XMS2700 512mb
WD800JB
ATI Radeon 8500
Samsung SM-348B w/ lastest firmware
WinXP SP1

I assume you have simply swapped the old hard drive and other peripherals
out to the new case, as the motherboards are different you will have to do a
"Repair Install".
Go into BIOS change Boot priority to CDROM
reboot from windows CD

if you still cannot boot from CDROM then there is a problem with your
installation, CD drive or BIOS which will need to be corrected before you
can proceed any further

Once you have booted into windows CD
1.. When the "Press any key to boot from CD" message is displayed on the
screen, press a key to start your computer from the Windows XP compact disc.

The following message is displayed on the Welcome to Setup screen that
appears:
This portion of the Setup program prepares Microsoft
Windows XP to run on your computer:

To setup Windows XP now, press ENTER.

To repair a Windows XP installation using Recovery Console, press R.

To quit Setup without installing Windows XP, press F3.

2.. Press ENTER to set up Windows XP.


3.. On the Windows XP Licensing Agreement screen, press F8 to agree to the
license agreement.
4.. Make sure that your current installation of Windows XP is selected in
the box, and then press R to repair Windows XP.
5.. Follow the instructions on the remaining screens to reinstall Windows
XP. After you repair Windows XP, you may be required to reactivate your copy
of Windows XP.


--
Please remove "no spam" to reply

David Gaguine
"Babar" <> wrote in message
news: om...
> Recently got a SB61G2 case, replacing my SS51g case. However, having
> problems getting the system to boot. The Intel Inside P4 screen shows,
> then the PCI device listing screen comes up, then I get a screen
> saying "we apologize for the inconvenience, but windows did not start
> successfully..." I select either Safe Mode or Start Windows Normally
> and 3 seconds later the system reboots.
>
> I have tried to get rid of Hard Disk Boot in BIOS, and start from
> CDROM, but this Windows screen still pops up. I cannot get it to boot
> from the XP Cd. All settings are "auto detect" including memory, cpu
> clock speed, etc.
>
> This is really frustrating as the system will not boot without
> restarting. Any ideas?
>
> SB61G2
> Corsair XMS2700 512mb
> WD800JB
> ATI Radeon 8500
> Samsung SM-348B w/ lastest firmware
> WinXP SP1


---
Outgoing mail is certified Virus Free.
Checked by AVG anti-virus system (http://www.grisoft.com).
Version: 6.0.498 / Virus Database: 297 - Release Date: 08/07/2003