1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

No SPD info display on Slot 1 (Slot A) ?

Discussion in 'Laptops' started by kimiraikkonen, Nov 27, 2006.

  1. For Toshiba S1800-100, if i insert my default 12MB PC100 SD-RAM memory
    to SLOT 1, i can't see anything in CPU-Z's(recognition software-famous)
    SPD tab. Only "Toshiba Unique" and 128MB appears.

    But if i insert the memory to SLOT 2, i can see everything like CAS-RAS
    timings, part number, manufacturer and etc... in "SPD" tab. Why are
    these 2 slots behave different for reading SPD chips?

    Why can't i read SPD info if i insert memory to Slot 1?

    Similiar link to this issue:
    http://www.lavalys.com/forum/index.php?showtopic=1844

    Note: Everest Home Edition is cannot read SPD info even my memory is in
    Slot 1 or 2.

    Thank you.
     
    kimiraikkonen, Nov 27, 2006
    #1
    1. Advertising

  2. kimiraikkonen

    Quaoar Guest

    kimiraikkonen wrote:
    > For Toshiba S1800-100, if i insert my default 12MB PC100 SD-RAM memory
    > to SLOT 1, i can't see anything in CPU-Z's(recognition software-famous)
    > SPD tab. Only "Toshiba Unique" and 128MB appears.
    >
    > But if i insert the memory to SLOT 2, i can see everything like CAS-RAS
    > timings, part number, manufacturer and etc... in "SPD" tab. Why are
    > these 2 slots behave different for reading SPD chips?
    >
    > Why can't i read SPD info if i insert memory to Slot 1?
    >
    > Similiar link to this issue:
    > http://www.lavalys.com/forum/index.php?showtopic=1844
    >
    > Note: Everest Home Edition is cannot read SPD info even my memory is in
    > Slot 1 or 2.
    >
    > Thank you.
    >


    SPD info is at the election of the mainboard designer. Solution: place
    all RAM into Slot 2 before placing into Slot 1. What happens if you put
    say, Crucial 128MB into slot 1?
    Q
     
    Quaoar, Nov 28, 2006
    #2
    1. Advertising

  3. If i place default memory (128MB to slot 2), SPD can be read! But it
    cannot be read on Slot 1 :(

    Quaoar wrote:
    > kimiraikkonen wrote:
    > > For Toshiba S1800-100, if i insert my default 12MB PC100 SD-RAM memory
    > > to SLOT 1, i can't see anything in CPU-Z's(recognition software-famous)
    > > SPD tab. Only "Toshiba Unique" and 128MB appears.
    > >
    > > But if i insert the memory to SLOT 2, i can see everything like CAS-RAS
    > > timings, part number, manufacturer and etc... in "SPD" tab. Why are
    > > these 2 slots behave different for reading SPD chips?
    > >
    > > Why can't i read SPD info if i insert memory to Slot 1?
    > >
    > > Similiar link to this issue:
    > > http://www.lavalys.com/forum/index.php?showtopic=1844
    > >
    > > Note: Everest Home Edition is cannot read SPD info even my memory is in
    > > Slot 1 or 2.
    > >
    > > Thank you.
    > >

    >
    > SPD info is at the election of the mainboard designer. Solution: place
    > all RAM into Slot 2 before placing into Slot 1. What happens if you put
    > say, Crucial 128MB into slot 1?
    > Q
     
    kimiraikkonen, Nov 28, 2006
    #3
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. Frank

    SPD Question

    Frank, Jul 19, 2003, in forum: Abit
    Replies:
    1
    Views:
    1,621
    Frank
    Jul 20, 2003
  2. W. Watson
    Replies:
    4
    Views:
    313
    W. Watson
    Dec 12, 2004
  3. John

    P5GPL AND RAM SET TO SPD

    John, Dec 13, 2005, in forum: Asus
    Replies:
    0
    Views:
    311
  4. Norbert
    Replies:
    0
    Views:
    383
    Norbert
    Jul 15, 2003
  5. Dave
    Replies:
    0
    Views:
    394
Loading...

Share This Page