Philips BGW200 WLAN driver issue

Discussion in 'Technical Support' started by Roger, May 4, 2010.

  1. Roger

    Roger

    Joined:
    May 4, 2010
    Messages:
    1
    Likes Received:
    0
    Hi,

    I am working currently on the fixing of the WLAN driver for Philips BGW200 chip for Windows CE 5.0. The WLAN chip is connected to the CPU Intel PXA270 via the SPI interface.

    We experience device freezing (during roaming?) in wireless environment with 17 access points and Cisco WLAN controller. The threads and timers of the driver are sequentially crashing or stopping somehow, the WLAN chip stops to send interrupts, and NDIS stops to query and set configuration data to the driver. Even reset of the driver invoked by NDIS doesn’t help.

    We do not have any documentation for the driver and the firmware is only a binary image. We have discovered many synchronization issues inside the driver and some memory leaks are also present.

    If you can, please help us. Is there any available developer documentation for the BGW200 chip, or for any Windows CE driver for it? Is there a tested and well running driver available?

    Any advice is welcome.

    Roger
     
    Roger, May 4, 2010
    #1
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. Dell 4550 PCI Input Device Driver

  2. Dell Wirless WLAN 1350 Adapter cannot connect to NETGEAR Wireless WGT624

  3. HP Pavillion 520n NIC driver needed

  4. Sound Driver A7n266-vm

  5. WLAN Ad-hoc with ICS in Vista - Internet access problem

  6. Philips

  7. connect2air wlan

  8. Nokia A032 wlan access poi

Loading...