1. This forum section is a read-only archive which contains old newsgroup posts. If you wish to post a query, please do so in one of our main forum sections (here). This way you will get a faster, better response from the members on Motherboard Point.

PS/2 mice pause in 32-bit Windows XP Pro. SP3 (safe mode too) and 7 PE liveCD...

Discussion in 'Motherboards' started by Ant, Apr 26, 2011.

  1. Ant

    Ant Guest

    Hello!

    Does anyone know why my PS/2 mice, with its USB adapter (Logitech and
    eMachine), like to pause on my new EVGA X58 SLI (132-BL-E758; BIOS date
    5/11/2010; v6.00 PG; release number IX58SZ64) motherboard in 32-bit
    Windows? I never had this problem with my other older motherboards with
    pure PS/2 connections, but this new motherboard only has a PS/2 keyboard
    port so I was forced to use a USB adapter for the mouse. The reason for
    a PS/2 mouse is because I use a KVM to share my monitor, mouse, and
    keyboard. I already eliminated the cables and KVM switch box to see
    where the pauses are coming from. They're not from KVM and its cables.
    :(

    My PS/2 mice likes to pause in 32-bit Windows. Rear ports seems to pause
    way more than the front. The pauses can cause randomly and every few
    seconds. I also tried different adapter cables beside different PS/2
    mice. I can reproduce this in both 32-bit Windows XP Pro. SP3 (safe mode
    too) and 7 PE liveCD.

    I was not able to reproduce it with a KNOPPIX v6.4.4 liveCD, but I did
    notice these USB errors in dmesg command:
    a_codec_realtek cx24123 cx24113 i7core_edac snd_hda_intel r8169 mii
    s5h1420 edac_core snd_hda_codec i2c_i801
    [ 14.355804] Pid: 2102, comm: modprobe Tainted: G W 2.6.37
    #13
    [ 14.355807] Call Trace:
    [ 14.355812] [<c0133505>] warn_slowpath_common+0x77/0x8c
    [ 14.355816] [<c01fd12c>] ? __xlate_proc_name+0x99/0xa0
    [ 14.355820] [<c01fd12c>] ? __xlate_proc_name+0x99/0xa0
    [ 14.355824] [<c0133596>] warn_slowpath_fmt+0x2e/0x30
    [ 14.355827] [<c01fd12c>] __xlate_proc_name+0x99/0xa0
    [ 14.355831] [<c01fdb67>] __proc_create+0x46/0xea
    [ 14.355835] [<c01fdd8b>] proc_mkdir_mode+0x23/0x47
    [ 14.355839] [<c01fddbe>] proc_mkdir+0xf/0x11
    [ 14.355844] [<c01751e8>] register_handler_proc+0xce/0xde
    [ 14.355849] [<c01734af>] __setup_irq+0x216/0x277
    [ 14.355854] [<c02f1fc2>] ? __pci_request_region+0xb0/0xf8
    [ 14.355858] [<c017390d>] request_threaded_irq+0x109/0x12e
    [ 14.355865] [<f839a109>] ? flexcop_pci_isr+0x0/0xf0
    [b2c2_flexcop_pci]
    [ 14.355871] [<f839a363>] flexcop_pci_probe+0x16a/0x281
    [b2c2_flexcop_pci]
    [ 14.355875] [<c02f329f>] local_pci_probe+0x3e/0x81
    [ 14.355879] [<c02f3d63>] pci_device_probe+0x43/0x66
    [ 14.355884] [<c0380d7b>] driver_probe_device+0x97/0x128
    [ 14.355887] [<c0380e4f>] __driver_attach+0x43/0x5f
    [ 14.355892] [<c0380532>] bus_for_each_dev+0x3d/0x67
    [ 14.355896] [<c0380c13>] driver_attach+0x19/0x1b
    [ 14.355899] [<c0380e0c>] ? __driver_attach+0x0/0x5f
    [ 14.355902] [<c03808fb>] bus_add_driver+0x9e/0x1e3
    [ 14.355906] [<c03810a2>] driver_register+0x84/0xeb
    [ 14.355910] [<c02f3f45>] __pci_register_driver+0x38/0x95
    [ 14.355916] [<f839d017>] flexcop_pci_module_init+0x17/0x19
    [b2c2_flexcop_pci]
    [ 14.355920] [<c0101174>] do_one_initcall+0x87/0x13d
    [ 14.355925] [<f839d000>] ? flexcop_pci_module_init+0x0/0x19
    [b2c2_flexcop_pci]
    [ 14.355930] [<c015df40>] sys_init_module+0xcd4/0xe74
    [ 14.355936] [<c057df05>] syscall_call+0x7/0xb
    [ 14.355940] ---[ end trace 5a0003f5d005a066 ]---
    [ 14.366953] DVB: registering new adapter (FlexCop Digital TV device)
    [ 14.368564] b2c2-flexcop: MAC address = 00:d0:d7:30:19:c1
    [ 14.369171] CX24123: cx24123_i2c_readreg: reg=0x0 (error=-121)
    [ 14.369173] CX24123: wrong demod revision: 87
    [ 14.570685] nxt200x: nxt200x_readbytes: i2c read error (addr 0x0a,
    err == -121)
    [ 14.570689] Unknown/Unsupported NXT chip: 00 00 00 00 00
    [ 14.571177] lgdt330x: i2c_read_demod_bytes: addr 0x59 select 0x02
    error (ret == -121)
    [ 14.571514] bcm3510: Revision: 0x1, Layer: 0xb.
    [ 14.583081] b2c2-flexcop: found 'Broadcom BCM3510 VSB/QAM frontend' .
    [ 14.583085] DVB: registering adapter 1 frontend 0 (Broadcom BCM3510
    VSB/QAM frontend)...
    [ 14.583191] b2c2-flexcop: initialization of 'Air2PC/AirStar 2 ATSC
    1st generation' at the 'PCI' bus controlled by a 'FlexCopIIb' complete
    [ 14.612931] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 15.874030] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
    [ 15.894649] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 16.272853] 00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
    [ 20.818513] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 22.974664] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 26.511687] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 28.707741] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 31.679122] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 33.183186] [drm] Initialized drm 1.1.0 20060810
    [ 33.412969] [drm] radeon kernel modesetting enabled.
    [ 33.413014] radeon 0000:02:00.0: PCI INT A -> GSI 16 (level, low) ->
    IRQ 16
    [ 33.413018] radeon 0000:02:00.0: setting latency timer to 64
    [ 33.413881] [drm] initializing kernel modesetting (RV770
    0x1002:0x9440).
    [ 33.414052] [drm] register mmio base: 0xF3BE0000
    [ 33.414055] [drm] register mmio size: 65536
    [ 33.414275] ATOM BIOS: WEKIVA
    [ 33.414290] radeon 0000:02:00.0: VRAM: 512M 0x0000000000000000 -
    0x000000001FFFFFFF (512M used)
    [ 33.414292] radeon 0000:02:00.0: GTT: 512M 0x0000000020000000 -
    0x000000003FFFFFFF
    [ 33.417099] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 33.417101] [drm] RAM width 256bits DDR
    [ 33.417163] [TTM] Zone kernel: Available graphics memory: 440070
    kiB.
    [ 33.417166] [TTM] Zone highmem: Available graphics memory: 1291818
    kiB.
    [ 33.417168] [TTM] Initializing pool allocator.
    [ 33.417185] [drm] radeon: 512M of VRAM memory ready
    [ 33.417187] [drm] radeon: 512M of GTT memory ready.
    [ 33.417232] radeon 0000:02:00.0: irq 44 for MSI/MSI-X
    [ 33.417237] radeon 0000:02:00.0: radeon: using MSI.
    [ 33.417263] [drm] radeon: irq initialized.
    [ 33.417265] [drm] GART: num cpu pages 131072, num gpu pages 131072
    [ 33.417525] [drm] Loading RV770 Microcode
    [ 33.564928] radeon 0000:02:00.0: WB enabled
    [ 33.611699] [drm] ring test succeeded in 1 usecs
    [ 33.611807] [drm] radeon: ib pool ready.
    [ 33.611902] [drm] ib test succeeded in 0 usecs
    [ 33.611904] [drm] Enabling audio support
    [ 33.611909] failed to evaluate ATIF got AE_BAD_PARAMETER
    [ 33.612360] [drm] Radeon Display Connectors
    [ 33.612362] [drm] Connector 0:
    [ 33.612363] [drm] DVI-I
    [ 33.612364] [drm] HPD2
    [ 33.612365] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68
    0x7e6c 0x7e6c
    [ 33.612366] [drm] Encoders:
    [ 33.612368] [drm] DFP1: INTERNAL_UNIPHY
    [ 33.612369] [drm] CRT2: INTERNAL_KLDSCP_DAC2
    [ 33.612370] [drm] Connector 1:
    [ 33.612371] [drm] DIN
    [ 33.612372] [drm] Encoders:
    [ 33.612373] [drm] TV1: INTERNAL_KLDSCP_DAC2
    [ 33.612374] [drm] Connector 2:
    [ 33.612374] [drm] DVI-I
    [ 33.612375] [drm] HPD1
    [ 33.612377] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28
    0x7e2c 0x7e2c
    [ 33.612378] [drm] Encoders:
    [ 33.612379] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 33.612380] [drm] DFP2: INTERNAL_KLDSCP_LVTMA
    [ 33.718954] [drm] Internal thermal controller with fan control
    [ 33.719028] [drm] radeon: power management initialized
    [ 33.852563] [drm] fb mappable at 0xD0142000
    [ 33.852565] [drm] vram apper at 0xD0000000
    [ 33.852566] [drm] size 5242880
    [ 33.852567] [drm] fb depth is 24
    [ 33.852568] [drm] pitch is 5120
    [ 34.278659] Console: switching to colour frame buffer device 160x64
    [ 34.285293] fb0: radeondrmfb frame buffer device
    [ 34.285294] drm: registered panic notifier
    [ 34.285297] [drm] Initialized radeon 2.7.0 20080528 for 0000:02:00.0
    on minor 0
    [ 40.114035] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 42.180338] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 46.612427] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 49.680232] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 54.654704] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 62.480716] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 64.463835] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 67.049219] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 69.844227] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 79.277358] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 89.652149] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 94.872817] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 95.632505] NET: Registered protocol family 10
    [ 95.633185] lo: Disabled Privacy Extensions
    [ 97.062232] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 103.108100] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 108.446748] lp: driver loaded but no devices found
    [ 108.470690] ppdev: user-space parallel port driver
    [ 108.498813] r8169 0000:07:00.0: eth0: link down
    [ 108.498899] ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 108.534227] r8169 0000:08:00.0: eth1: link up
    [ 108.534238] r8169 0000:08:00.0: eth1: link up
    [ 114.008620] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 116.387697] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 119.036273] eth1: no IPv6 routers present
    [ 124.183759] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 130.093198] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 151.614751] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 159.354201] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 164.897676] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 181.125314] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 189.863026] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 198.287969] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 212.765426] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 220.704585] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 223.333203] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 226.407712] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 228.899943] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 231.086014] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 234.935796] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 239.201473] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 243.450576] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 259.398739] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 264.829034] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 269.820114] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 292.173511] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 328.791420] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 351.024955] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 353.221014] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 370.343766] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 378.465890] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 381.101197] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 393.678725] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 404.699026] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 413.905902] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 433.114917] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 436.019723] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 451.412212] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 462.702018] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 468.012513] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 472.431309] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 479.049477] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 483.508131] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 490.518934] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 505.102857] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 506.906330] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 511.571328] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 514.143401] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 516.888492] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 521.649982] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 526.105354] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 541.391366] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 543.713877] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 550.631512] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 553.107087] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 555.832232] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 557.812012] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 560.294241] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 570.406189] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 577.017682] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 581.619455] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 587.688625] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 594.386637] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 600.938226] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 607.060651] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 620.799395] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 631.533556] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 645.668278] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 653.797110] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 656.409120] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 668.930050] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 698.959723] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 715.084235] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 720.348117] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 732.822526] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 768.655149] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 799.909251] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 829.942268] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 840.277108] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 843.261804] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 851.121066] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 858.581075] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 860.727237] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 868.579872] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 882.252097] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 886.833925] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 894.956061] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 897.857542] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 904.013170] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 909.147360] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 934.831444] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 1012.020116] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 1019.303808] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 1038.076903] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 1040.961754] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 1088.001000] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 1094.046886] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2
    [ 1105.762590] usb 7-1: reset low speed USB device using uhci_hcd and
    address 2


    Does Windows not reset USB device or something? I also tried Logitech
    Mouseware, but that didn't seem to help either.

    Thank you in advance. :)

    FYI on my PC specifications: Intel i7 950 CPU, three 2 GB of Kingston
    HyperX T1 Series 240-Pin DDR3 SDRAM 2000 (PC3 16000) Desktop Memory
    Model KHX2000C9AD3T1K3/6GX DDR3 RAM (6 GB total; 2.5 GB shown; will
    install a 64-bit OS later on to use it all) in 32-bit old, updated
    Windows XP Pro. SP3 (Internet Explorer [rarely used] v6.0 SP3 and
    DirectX 9.0c [June 2010]), EVGA X58 SLI (132-BL-E758; BIOS date
    5/11/2010; v6.00 PG; release number IX58SZ64) motherboard, MSI
    R4870-T2D512 OC Radeon HD 4870 512 MB (S-video+composite cables and
    adapter connected to Toshiba W-627 VCR to a January 1996 20" Sharp CRT
    TV), an used mid-tower Antec P180 ATX case, five 120 mm case fans, a
    side dual cooler fan to cool PCI cards, two onboard RealTek Gigabit
    Ethernets and onboard RealTek sound, Corsair CMPSU-650TX 650 watts
    ATX12V/EPS12V SLI Ready CrossFire Ready 80 PLUS Certified Active PFC
    power supply, two Broadband Technologies Air2PC-ATSC-PCI HDTV tuner
    cards (DVB; revision 2; connected to a DB2 bowtie antenna), LG HL-DT-ST
    DVDRAM GH24NS50 burner drive, Sony NEC Optiarc DVD-RW AD-7220S SATA
    burner drive, two internal 7200 RPM Seagate SATA hard disk drives (HDDs)
    [ST3320620AS 320 GB and ST3500320AS 500 GB], and Logitech Z-2300
    speakers (2.1 setup and analog).
    --
    Quote of the Week: "The foreign policy aim of ants can be summed up as
    follows: restless aggression, territorial conquest, and genocidal
    annihilation of neighboring colonies whenever possible. If ants had
    nuclear weapons, they would probably end the world in a week." --Journey
    to the Ants, page 59. Bert Holldobler & Edward O. Wilson
    /\___/\ Ant @ http://antfarm.home.dhs.org (Personal Web Site)
    / /\ /\ \ Ant's Quality Foraged Links: http://aqfl.net
    | |o o| |
    \ _ / Please nuke ANT if replying by e-mail. If crediting,
    ( ) then please kindly use Ant nickname and AQFL URL/link.
     
    Ant, Apr 26, 2011
    #1
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.

Share This Page