Shuttle SB81P

Discussion in 'Shuttle' started by Nils Langeland, Jan 4, 2005.

  1. Hello,
    I have been runnning my SB81P for a wwek now, with no problems.
    Then, using SiSoft Sandra 2005, i see the following:
    Relevant lines marked with >>>

    >>> Auto Fan Speed Control : No


    >>> Warning 216 : CPU fan has failed! Check it.


    CPU-Temp is at 55C, so cooling is taking place.
    I do feel that the fan is noisy, doesn't seem to alter speed, running at
    the same RPM all the time,

    Any good advice out there?

    Greetings from Nils Langeland




    SiSoftware Sandra

    Processor
    Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
    Speed : 3.22GHz
    Performance Rating : PR4276 (estimated)
    CPUs per Core : 1 Unit(s)
    SMT Support : 2 Unit(s)
    Type : Standard
    Package : FC LGA775
    Rated Speed/FSB : 3200MHz / 4x 200MHz
    Multiplier : 16/1x
    Minimum/Maximum Multiplier : 2/1x / 16/1x
    Generation : G8
    Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
    Revision/Stepping : 3 / 4 (0)
    Stepping Mask : D0
    Microcode : MU0F340E
    Maximum Physical / Virtual Addressing : 36-bit / 32-bit
    Native Page Size : 4kB

    Co-Processor (FPU)
    Type : Built-in
    Revision/Stepping : 3 / 4 (0)

    Processor Cache(s)
    Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64 byte
    line size, 2 threads sharing
    Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64 byte
    line size
    L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte line
    size, 2 lines per sector, 2 threads sharing
    L2 Cache Multiplier : 1/1x (3215MHz)

    Upgradeability
    Socket/Slot : Socket 478
    Upgrade Interface : ZIF Socket
    Supported Speed(s) : 3.22GHz+

    Environment Monitor 1
    Model : ITE IT8705/12 ISA
    Mainboard Specific Support : No

    Sensors
    CPU Temperature : 55.0°C / 131.0°F td
    >>> Auto Fan Speed Control : No

    CPU Fan Speed : 654rpm
    CPU Voltage : 1.30V

    Features
    FPU - Co-Processor Built-in : Yes
    VME - Virtual Mode Extensions : Yes
    DE - Debugging Extension : Yes
    PSE - Page Size Extension : Yes
    TSC - Time Stamp Counter : Yes
    MSR - Model Specific Registers : Yes
    PAE - Physical Address Extension : Yes
    MCE - Machine Check Exception : Yes
    CX8 - Compare & Exchange Instruction : Yes
    APIC - Local APIC Built-in : Yes
    SEP - Fast System Call : Yes
    MTRR - Memory Type Range Registers : Yes
    PGE - Page Global Enable : Yes
    MCA - Machine Check Architecture : Yes
    PAT - Page Attribute Table : Yes
    PSE36 - 36-bit Page Size Extension : Yes
    PSN - Unique Serial Number : No
    CLF - Cache Line Flush Support : Yes
    DS - Debug Trace & EMON Store : Yes
    ACPI - Software Clock Control : Yes
    (W)MMX Technology : Yes
    FXSR - Fast Float Save & Restore : Yes
    SSE Technology : Yes
    SSE2 Technology : Yes
    SS - Self Snoop : Yes
    HTT - Hyper-Threading Technology : Yes
    TM - Thermal Monitor : Yes
    PBE - Pending Break Enable : Yes
    IA64 Technology : No
    SSE3 Technology : Yes
    MON - Monitor/MWait : Yes
    DSCPL - CPL qualified Debug Store : Yes
    EST - Enhanced SpeedStep Technology : No
    TM2 - Thermal Monitor 2 : No
    CID - Context ID : Yes
    xTPR - Send Task Priority Messages : Yes
    DAZ - Denormals Are Zero : Yes

    Advanced Settings
    Data Error Checking : No
    Fast Strings : No
    x86 FPU Compatibility Mode : No
    Prefetch Queue : Yes
    Branch Trace Storage : Yes
    Data Cache Active Mode : Yes
    IO Queue Depth : 12 request(s)
    TM - Thermal Monitor : Yes
    TM2 - Thermal Monitor 2 : No
    Specific Platform Requirements : No
    Control Temperature : 68.0°C / 154.4°F

    Machine Check Architecture Settings
    Number of Reporting Banks : 4 bank(s)
    Extended Machine Check Support : Yes
    Number of Extended Reporting Banks : 12 bank(s)

    Variable Range MTRR Settings
    MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB

    Fixed Range MTRR Settings
    MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
    MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
    MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
    MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
    MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
    MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
    MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
    MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
    MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
    MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
    MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
    MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
    MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
    MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
    MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
    MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
    MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
    MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
    MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
    MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
    MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
    MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
    MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
    MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
    MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
    MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
    MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
    MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
    MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
    MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
    MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
    MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
    MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
    MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
    MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
    MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
    MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
    MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
    MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
    MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
    MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
    MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
    MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
    MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
    MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
    MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
    MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
    MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
    MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
    MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
    MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
    MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
    MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
    MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
    MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
    MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
    MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
    MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
    MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
    MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
    MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
    MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
    MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
    MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
    MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
    MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
    MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
    MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
    MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
    MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
    MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
    MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
    MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
    MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
    MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
    MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
    MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
    MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
    MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
    MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
    MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
    MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
    MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
    MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
    MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
    MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
    MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
    MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT

    PAT Settings
    PAT 0 : WB
    PAT 1 : WC
    PAT 2 : UC-
    PAT 3 : UC
    PAT 4 : WB
    PAT 5 : WC
    PAT 6 : UC-
    PAT 7 : UC

    Performance Tips
    Notice 224 : SMBIOS/DMI information may be inaccurate.
    >>> Warning 216 : CPU fan has failed! Check it.

    Tip 2 : Double-click tip or press Enter while a tip is selected for more
    information about the tip.
     
    1. Advertising

  2. Evert Meulie

    Evert Meulie Guest

    Does your SB81P has the most recent BIOS? Shuttle has made some changes
    in the thermal config lately...

    Regards,
    Evert

    Nils Langeland wrote:
    > Hello,
    > I have been runnning my SB81P for a wwek now, with no problems.
    > Then, using SiSoft Sandra 2005, i see the following:
    > Relevant lines marked with >>>
    >
    >>>> Auto Fan Speed Control : No

    >
    >
    >>>> Warning 216 : CPU fan has failed! Check it.

    >
    >
    > CPU-Temp is at 55C, so cooling is taking place.
    > I do feel that the fan is noisy, doesn't seem to alter speed, running
    > at the same RPM all the time,
    >
    > Any good advice out there?
    >
    > Greetings from Nils Langeland
    >
    >
    >
    >
    > SiSoftware Sandra
    >
    > Processor
    > Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
    > Speed : 3.22GHz
    > Performance Rating : PR4276 (estimated)
    > CPUs per Core : 1 Unit(s)
    > SMT Support : 2 Unit(s)
    > Type : Standard
    > Package : FC LGA775
    > Rated Speed/FSB : 3200MHz / 4x 200MHz
    > Multiplier : 16/1x
    > Minimum/Maximum Multiplier : 2/1x / 16/1x
    > Generation : G8
    > Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
    > Revision/Stepping : 3 / 4 (0)
    > Stepping Mask : D0
    > Microcode : MU0F340E
    > Maximum Physical / Virtual Addressing : 36-bit / 32-bit
    > Native Page Size : 4kB
    >
    > Co-Processor (FPU)
    > Type : Built-in
    > Revision/Stepping : 3 / 4 (0)
    >
    > Processor Cache(s)
    > Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64 byte
    > line size, 2 threads sharing
    > Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64 byte
    > line size
    > L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte line
    > size, 2 lines per sector, 2 threads sharing
    > L2 Cache Multiplier : 1/1x (3215MHz)
    >
    > Upgradeability
    > Socket/Slot : Socket 478
    > Upgrade Interface : ZIF Socket
    > Supported Speed(s) : 3.22GHz+
    >
    > Environment Monitor 1
    > Model : ITE IT8705/12 ISA
    > Mainboard Specific Support : No
    >
    > Sensors
    > CPU Temperature : 55.0°C / 131.0°F td
    >
    >>>> Auto Fan Speed Control : No

    >
    > CPU Fan Speed : 654rpm
    > CPU Voltage : 1.30V
    >
    > Features
    > FPU - Co-Processor Built-in : Yes
    > VME - Virtual Mode Extensions : Yes
    > DE - Debugging Extension : Yes
    > PSE - Page Size Extension : Yes
    > TSC - Time Stamp Counter : Yes
    > MSR - Model Specific Registers : Yes
    > PAE - Physical Address Extension : Yes
    > MCE - Machine Check Exception : Yes
    > CX8 - Compare & Exchange Instruction : Yes
    > APIC - Local APIC Built-in : Yes
    > SEP - Fast System Call : Yes
    > MTRR - Memory Type Range Registers : Yes
    > PGE - Page Global Enable : Yes
    > MCA - Machine Check Architecture : Yes
    > PAT - Page Attribute Table : Yes
    > PSE36 - 36-bit Page Size Extension : Yes
    > PSN - Unique Serial Number : No
    > CLF - Cache Line Flush Support : Yes
    > DS - Debug Trace & EMON Store : Yes
    > ACPI - Software Clock Control : Yes
    > (W)MMX Technology : Yes
    > FXSR - Fast Float Save & Restore : Yes
    > SSE Technology : Yes
    > SSE2 Technology : Yes
    > SS - Self Snoop : Yes
    > HTT - Hyper-Threading Technology : Yes
    > TM - Thermal Monitor : Yes
    > PBE - Pending Break Enable : Yes
    > IA64 Technology : No
    > SSE3 Technology : Yes
    > MON - Monitor/MWait : Yes
    > DSCPL - CPL qualified Debug Store : Yes
    > EST - Enhanced SpeedStep Technology : No
    > TM2 - Thermal Monitor 2 : No
    > CID - Context ID : Yes
    > xTPR - Send Task Priority Messages : Yes
    > DAZ - Denormals Are Zero : Yes
    >
    > Advanced Settings
    > Data Error Checking : No
    > Fast Strings : No
    > x86 FPU Compatibility Mode : No
    > Prefetch Queue : Yes
    > Branch Trace Storage : Yes
    > Data Cache Active Mode : Yes
    > IO Queue Depth : 12 request(s)
    > TM - Thermal Monitor : Yes
    > TM2 - Thermal Monitor 2 : No
    > Specific Platform Requirements : No
    > Control Temperature : 68.0°C / 154.4°F
    >
    > Machine Check Architecture Settings
    > Number of Reporting Banks : 4 bank(s)
    > Extended Machine Check Support : Yes
    > Number of Extended Reporting Banks : 12 bank(s)
    >
    > Variable Range MTRR Settings
    > MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
    >
    > Fixed Range MTRR Settings
    > MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
    > MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
    > MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
    > MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
    > MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
    > MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
    > MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
    > MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
    > MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
    > MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
    > MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
    > MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
    > MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
    > MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
    > MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
    > MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
    > MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
    > MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
    > MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
    > MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
    > MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
    > MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
    > MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
    > MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
    > MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
    > MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
    > MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
    > MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
    > MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
    > MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
    > MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
    > MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
    > MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
    > MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
    > MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
    > MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
    > MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
    > MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
    > MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
    > MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
    > MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
    > MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
    > MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
    > MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
    > MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
    > MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
    > MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
    > MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
    > MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
    > MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
    > MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
    > MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
    > MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
    > MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
    > MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
    > MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
    > MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
    > MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
    > MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
    > MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
    > MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
    > MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
    > MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
    > MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
    > MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
    > MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
    > MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
    > MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
    > MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
    > MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
    > MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
    > MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
    > MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
    > MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
    > MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
    > MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
    > MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
    > MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
    > MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
    > MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
    > MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
    > MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
    > MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
    > MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
    > MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
    > MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
    > MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
    > MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
    >
    > PAT Settings
    > PAT 0 : WB
    > PAT 1 : WC
    > PAT 2 : UC-
    > PAT 3 : UC
    > PAT 4 : WB
    > PAT 5 : WC
    > PAT 6 : UC-
    > PAT 7 : UC
    >
    > Performance Tips
    > Notice 224 : SMBIOS/DMI information may be inaccurate.
    >
    >>>> Warning 216 : CPU fan has failed! Check it.

    >
    > Tip 2 : Double-click tip or press Enter while a tip is selected for
    > more information about the tip.
     
    1. Advertising

  3. Thanks Evert.
    Do you have a straight-forward procedure for flashing the BIOS?
    I only find a .bin file on SHUTTLE, but that's not enough for flashing
    from a floppy - or?

    Nils

    On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie <>
    wrote:

    > Does your SB81P has the most recent BIOS? Shuttle has made some changes
    > in the thermal config lately...
    >
    > Regards,
    > Evert
    >
    > Nils Langeland wrote:
    >> Hello,
    >> I have been runnning my SB81P for a wwek now, with no problems.
    >> Then, using SiSoft Sandra 2005, i see the following:
    >> Relevant lines marked with >>>
    >>
    >>>>> Auto Fan Speed Control : No

    >>
    >>>>> Warning 216 : CPU fan has failed! Check it.

    >> CPU-Temp is at 55C, so cooling is taking place.
    >> I do feel that the fan is noisy, doesn't seem to alter speed, running
    >> at the same RPM all the time,
    >> Any good advice out there?
    >> Greetings from Nils Langeland
    >> SiSoftware Sandra
    >> Processor
    >> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
    >> Speed : 3.22GHz
    >> Performance Rating : PR4276 (estimated)
    >> CPUs per Core : 1 Unit(s)
    >> SMT Support : 2 Unit(s)
    >> Type : Standard
    >> Package : FC LGA775
    >> Rated Speed/FSB : 3200MHz / 4x 200MHz
    >> Multiplier : 16/1x
    >> Minimum/Maximum Multiplier : 2/1x / 16/1x
    >> Generation : G8
    >> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
    >> Revision/Stepping : 3 / 4 (0)
    >> Stepping Mask : D0
    >> Microcode : MU0F340E
    >> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
    >> Native Page Size : 4kB
    >> Co-Processor (FPU)
    >> Type : Built-in
    >> Revision/Stepping : 3 / 4 (0)
    >> Processor Cache(s)
    >> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64 byte
    >> line size, 2 threads sharing
    >> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64
    >> byte line size
    >> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte line
    >> size, 2 lines per sector, 2 threads sharing
    >> L2 Cache Multiplier : 1/1x (3215MHz)
    >> Upgradeability
    >> Socket/Slot : Socket 478
    >> Upgrade Interface : ZIF Socket
    >> Supported Speed(s) : 3.22GHz+
    >> Environment Monitor 1
    >> Model : ITE IT8705/12 ISA
    >> Mainboard Specific Support : No
    >> Sensors
    >> CPU Temperature : 55.0°C / 131.0°F td
    >>
    >>>>> Auto Fan Speed Control : No

    >> CPU Fan Speed : 654rpm
    >> CPU Voltage : 1.30V
    >> Features
    >> FPU - Co-Processor Built-in : Yes
    >> VME - Virtual Mode Extensions : Yes
    >> DE - Debugging Extension : Yes
    >> PSE - Page Size Extension : Yes
    >> TSC - Time Stamp Counter : Yes
    >> MSR - Model Specific Registers : Yes
    >> PAE - Physical Address Extension : Yes
    >> MCE - Machine Check Exception : Yes
    >> CX8 - Compare & Exchange Instruction : Yes
    >> APIC - Local APIC Built-in : Yes
    >> SEP - Fast System Call : Yes
    >> MTRR - Memory Type Range Registers : Yes
    >> PGE - Page Global Enable : Yes
    >> MCA - Machine Check Architecture : Yes
    >> PAT - Page Attribute Table : Yes
    >> PSE36 - 36-bit Page Size Extension : Yes
    >> PSN - Unique Serial Number : No
    >> CLF - Cache Line Flush Support : Yes
    >> DS - Debug Trace & EMON Store : Yes
    >> ACPI - Software Clock Control : Yes
    >> (W)MMX Technology : Yes
    >> FXSR - Fast Float Save & Restore : Yes
    >> SSE Technology : Yes
    >> SSE2 Technology : Yes
    >> SS - Self Snoop : Yes
    >> HTT - Hyper-Threading Technology : Yes
    >> TM - Thermal Monitor : Yes
    >> PBE - Pending Break Enable : Yes
    >> IA64 Technology : No
    >> SSE3 Technology : Yes
    >> MON - Monitor/MWait : Yes
    >> DSCPL - CPL qualified Debug Store : Yes
    >> EST - Enhanced SpeedStep Technology : No
    >> TM2 - Thermal Monitor 2 : No
    >> CID - Context ID : Yes
    >> xTPR - Send Task Priority Messages : Yes
    >> DAZ - Denormals Are Zero : Yes
    >> Advanced Settings
    >> Data Error Checking : No
    >> Fast Strings : No
    >> x86 FPU Compatibility Mode : No
    >> Prefetch Queue : Yes
    >> Branch Trace Storage : Yes
    >> Data Cache Active Mode : Yes
    >> IO Queue Depth : 12 request(s)
    >> TM - Thermal Monitor : Yes
    >> TM2 - Thermal Monitor 2 : No
    >> Specific Platform Requirements : No
    >> Control Temperature : 68.0°C / 154.4°F
    >> Machine Check Architecture Settings
    >> Number of Reporting Banks : 4 bank(s)
    >> Extended Machine Check Support : Yes
    >> Number of Extended Reporting Banks : 12 bank(s)
    >> Variable Range MTRR Settings
    >> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
    >> Fixed Range MTRR Settings
    >> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
    >> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
    >> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
    >> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
    >> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
    >> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
    >> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
    >> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
    >> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
    >> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
    >> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
    >> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
    >> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
    >> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
    >> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
    >> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
    >> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
    >> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
    >> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
    >> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
    >> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
    >> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
    >> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
    >> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
    >> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
    >> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
    >> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
    >> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
    >> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
    >> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
    >> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
    >> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
    >> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
    >> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
    >> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
    >> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
    >> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
    >> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
    >> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
    >> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
    >> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
    >> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
    >> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
    >> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
    >> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
    >> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
    >> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
    >> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
    >> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
    >> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
    >> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
    >> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
    >> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
    >> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
    >> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
    >> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
    >> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
    >> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
    >> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
    >> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
    >> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
    >> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
    >> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
    >> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
    >> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
    >> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
    >> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
    >> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
    >> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
    >> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
    >> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
    >> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
    >> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
    >> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
    >> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
    >> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
    >> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
    >> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
    >> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
    >> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
    >> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
    >> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
    >> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
    >> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
    >> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
    >> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
    >> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
    >> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
    >> PAT Settings
    >> PAT 0 : WB
    >> PAT 1 : WC
    >> PAT 2 : UC-
    >> PAT 3 : UC
    >> PAT 4 : WB
    >> PAT 5 : WC
    >> PAT 6 : UC-
    >> PAT 7 : UC
    >> Performance Tips
    >> Notice 224 : SMBIOS/DMI information may be inaccurate.
    >>
    >>>>> Warning 216 : CPU fan has failed! Check it.

    >> Tip 2 : Double-click tip or press Enter while a tip is selected for
    >> more information about the tip.




    --
    Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
     
  4. Evert Meulie

    Evert Meulie Guest

    Why not do it the east way and use Winflash to flash from Windoze? Then
    all you need is that .bin file... :cool:

    Greetz,
    Evert

    Nils Langeland wrote:
    > Thanks Evert.
    > Do you have a straight-forward procedure for flashing the BIOS?
    > I only find a .bin file on SHUTTLE, but that's not enough for flashing
    > from a floppy - or?
    >
    > Nils
    >
    > On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie <>
    > wrote:
    >
    >> Does your SB81P has the most recent BIOS? Shuttle has made some
    >> changes in the thermal config lately...
    >>
    >> Regards,
    >> Evert
    >>
    >> Nils Langeland wrote:
    >>
    >>> Hello,
    >>> I have been runnning my SB81P for a wwek now, with no problems.
    >>> Then, using SiSoft Sandra 2005, i see the following:
    >>> Relevant lines marked with >>>
    >>>
    >>>>>> Auto Fan Speed Control : No
    >>>
    >>>
    >>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>
    >>> CPU-Temp is at 55C, so cooling is taking place.
    >>> I do feel that the fan is noisy, doesn't seem to alter speed,
    >>> running at the same RPM all the time,
    >>> Any good advice out there?
    >>> Greetings from Nils Langeland
    >>> SiSoftware Sandra
    >>> Processor
    >>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
    >>> Speed : 3.22GHz
    >>> Performance Rating : PR4276 (estimated)
    >>> CPUs per Core : 1 Unit(s)
    >>> SMT Support : 2 Unit(s)
    >>> Type : Standard
    >>> Package : FC LGA775
    >>> Rated Speed/FSB : 3200MHz / 4x 200MHz
    >>> Multiplier : 16/1x
    >>> Minimum/Maximum Multiplier : 2/1x / 16/1x
    >>> Generation : G8
    >>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
    >>> Revision/Stepping : 3 / 4 (0)
    >>> Stepping Mask : D0
    >>> Microcode : MU0F340E
    >>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
    >>> Native Page Size : 4kB
    >>> Co-Processor (FPU)
    >>> Type : Built-in
    >>> Revision/Stepping : 3 / 4 (0)
    >>> Processor Cache(s)
    >>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
    >>> byte line size, 2 threads sharing
    >>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64
    >>> byte line size
    >>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
    >>> line size, 2 lines per sector, 2 threads sharing
    >>> L2 Cache Multiplier : 1/1x (3215MHz)
    >>> Upgradeability
    >>> Socket/Slot : Socket 478
    >>> Upgrade Interface : ZIF Socket
    >>> Supported Speed(s) : 3.22GHz+
    >>> Environment Monitor 1
    >>> Model : ITE IT8705/12 ISA
    >>> Mainboard Specific Support : No
    >>> Sensors
    >>> CPU Temperature : 55.0°C / 131.0°F td
    >>>
    >>>>>> Auto Fan Speed Control : No
    >>>
    >>> CPU Fan Speed : 654rpm
    >>> CPU Voltage : 1.30V
    >>> Features
    >>> FPU - Co-Processor Built-in : Yes
    >>> VME - Virtual Mode Extensions : Yes
    >>> DE - Debugging Extension : Yes
    >>> PSE - Page Size Extension : Yes
    >>> TSC - Time Stamp Counter : Yes
    >>> MSR - Model Specific Registers : Yes
    >>> PAE - Physical Address Extension : Yes
    >>> MCE - Machine Check Exception : Yes
    >>> CX8 - Compare & Exchange Instruction : Yes
    >>> APIC - Local APIC Built-in : Yes
    >>> SEP - Fast System Call : Yes
    >>> MTRR - Memory Type Range Registers : Yes
    >>> PGE - Page Global Enable : Yes
    >>> MCA - Machine Check Architecture : Yes
    >>> PAT - Page Attribute Table : Yes
    >>> PSE36 - 36-bit Page Size Extension : Yes
    >>> PSN - Unique Serial Number : No
    >>> CLF - Cache Line Flush Support : Yes
    >>> DS - Debug Trace & EMON Store : Yes
    >>> ACPI - Software Clock Control : Yes
    >>> (W)MMX Technology : Yes
    >>> FXSR - Fast Float Save & Restore : Yes
    >>> SSE Technology : Yes
    >>> SSE2 Technology : Yes
    >>> SS - Self Snoop : Yes
    >>> HTT - Hyper-Threading Technology : Yes
    >>> TM - Thermal Monitor : Yes
    >>> PBE - Pending Break Enable : Yes
    >>> IA64 Technology : No
    >>> SSE3 Technology : Yes
    >>> MON - Monitor/MWait : Yes
    >>> DSCPL - CPL qualified Debug Store : Yes
    >>> EST - Enhanced SpeedStep Technology : No
    >>> TM2 - Thermal Monitor 2 : No
    >>> CID - Context ID : Yes
    >>> xTPR - Send Task Priority Messages : Yes
    >>> DAZ - Denormals Are Zero : Yes
    >>> Advanced Settings
    >>> Data Error Checking : No
    >>> Fast Strings : No
    >>> x86 FPU Compatibility Mode : No
    >>> Prefetch Queue : Yes
    >>> Branch Trace Storage : Yes
    >>> Data Cache Active Mode : Yes
    >>> IO Queue Depth : 12 request(s)
    >>> TM - Thermal Monitor : Yes
    >>> TM2 - Thermal Monitor 2 : No
    >>> Specific Platform Requirements : No
    >>> Control Temperature : 68.0°C / 154.4°F
    >>> Machine Check Architecture Settings
    >>> Number of Reporting Banks : 4 bank(s)
    >>> Extended Machine Check Support : Yes
    >>> Number of Extended Reporting Banks : 12 bank(s)
    >>> Variable Range MTRR Settings
    >>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
    >>> Fixed Range MTRR Settings
    >>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
    >>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
    >>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
    >>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
    >>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
    >>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
    >>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
    >>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
    >>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
    >>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
    >>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
    >>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
    >>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
    >>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
    >>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
    >>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
    >>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
    >>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
    >>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
    >>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
    >>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
    >>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
    >>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
    >>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
    >>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
    >>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
    >>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
    >>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
    >>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
    >>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
    >>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
    >>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
    >>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
    >>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
    >>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
    >>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
    >>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
    >>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
    >>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
    >>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
    >>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
    >>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
    >>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
    >>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
    >>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
    >>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
    >>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
    >>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
    >>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
    >>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
    >>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
    >>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
    >>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
    >>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
    >>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
    >>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
    >>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
    >>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
    >>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
    >>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
    >>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
    >>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
    >>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
    >>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
    >>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
    >>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
    >>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
    >>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
    >>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
    >>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
    >>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
    >>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
    >>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
    >>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
    >>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
    >>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
    >>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
    >>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
    >>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
    >>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
    >>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
    >>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
    >>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
    >>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
    >>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
    >>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
    >>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
    >>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
    >>> PAT Settings
    >>> PAT 0 : WB
    >>> PAT 1 : WC
    >>> PAT 2 : UC-
    >>> PAT 3 : UC
    >>> PAT 4 : WB
    >>> PAT 5 : WC
    >>> PAT 6 : UC-
    >>> PAT 7 : UC
    >>> Performance Tips
    >>> Notice 224 : SMBIOS/DMI information may be inaccurate.
    >>>
    >>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>
    >>> Tip 2 : Double-click tip or press Enter while a tip is selected for
    >>> more information about the tip.

    >
    >
    >
    >
     
  5. Hello, again,
    I upgraded the BIOS using WinFlash, went like a breeze, but Sandra still
    reports the same thing about fan-failure.
    CPU-temperature is on a steady 55.

    Are there any settings in the BIOS-setup that would need checking?
    Oddly, I'm not able to get the "Num-Lock on at startup" to work, either.
    Cheers Nils

    On Wed, 05 Jan 2005 10:46:57 +0100, Evert Meulie <>
    wrote:

    > Why not do it the east way and use Winflash to flash from Windoze? Then
    > all you need is that .bin file... :cool:
    >
    > Greetz,
    > Evert
    >
    > Nils Langeland wrote:
    >> Thanks Evert.
    >> Do you have a straight-forward procedure for flashing the BIOS?
    >> I only find a .bin file on SHUTTLE, but that's not enough for flashing
    >> from a floppy - or?
    >> Nils
    >> On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie <>
    >> wrote:
    >>
    >>> Does your SB81P has the most recent BIOS? Shuttle has made some
    >>> changes in the thermal config lately...
    >>>
    >>> Regards,
    >>> Evert
    >>>
    >>> Nils Langeland wrote:
    >>>
    >>>> Hello,
    >>>> I have been runnning my SB81P for a wwek now, with no problems.
    >>>> Then, using SiSoft Sandra 2005, i see the following:
    >>>> Relevant lines marked with >>>
    >>>>
    >>>>>>> Auto Fan Speed Control : No
    >>>>
    >>>>
    >>>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>>
    >>>> CPU-Temp is at 55C, so cooling is taking place.
    >>>> I do feel that the fan is noisy, doesn't seem to alter speed,
    >>>> running at the same RPM all the time,
    >>>> Any good advice out there?
    >>>> Greetings from Nils Langeland
    >>>> SiSoftware Sandra
    >>>> Processor
    >>>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
    >>>> Speed : 3.22GHz
    >>>> Performance Rating : PR4276 (estimated)
    >>>> CPUs per Core : 1 Unit(s)
    >>>> SMT Support : 2 Unit(s)
    >>>> Type : Standard
    >>>> Package : FC LGA775
    >>>> Rated Speed/FSB : 3200MHz / 4x 200MHz
    >>>> Multiplier : 16/1x
    >>>> Minimum/Maximum Multiplier : 2/1x / 16/1x
    >>>> Generation : G8
    >>>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
    >>>> Revision/Stepping : 3 / 4 (0)
    >>>> Stepping Mask : D0
    >>>> Microcode : MU0F340E
    >>>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
    >>>> Native Page Size : 4kB
    >>>> Co-Processor (FPU)
    >>>> Type : Built-in
    >>>> Revision/Stepping : 3 / 4 (0)
    >>>> Processor Cache(s)
    >>>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
    >>>> byte line size, 2 threads sharing
    >>>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64
    >>>> byte line size
    >>>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
    >>>> line size, 2 lines per sector, 2 threads sharing
    >>>> L2 Cache Multiplier : 1/1x (3215MHz)
    >>>> Upgradeability
    >>>> Socket/Slot : Socket 478
    >>>> Upgrade Interface : ZIF Socket
    >>>> Supported Speed(s) : 3.22GHz+
    >>>> Environment Monitor 1
    >>>> Model : ITE IT8705/12 ISA
    >>>> Mainboard Specific Support : No
    >>>> Sensors
    >>>> CPU Temperature : 55.0°C / 131.0°F td
    >>>>
    >>>>>>> Auto Fan Speed Control : No
    >>>>
    >>>> CPU Fan Speed : 654rpm
    >>>> CPU Voltage : 1.30V
    >>>> Features
    >>>> FPU - Co-Processor Built-in : Yes
    >>>> VME - Virtual Mode Extensions : Yes
    >>>> DE - Debugging Extension : Yes
    >>>> PSE - Page Size Extension : Yes
    >>>> TSC - Time Stamp Counter : Yes
    >>>> MSR - Model Specific Registers : Yes
    >>>> PAE - Physical Address Extension : Yes
    >>>> MCE - Machine Check Exception : Yes
    >>>> CX8 - Compare & Exchange Instruction : Yes
    >>>> APIC - Local APIC Built-in : Yes
    >>>> SEP - Fast System Call : Yes
    >>>> MTRR - Memory Type Range Registers : Yes
    >>>> PGE - Page Global Enable : Yes
    >>>> MCA - Machine Check Architecture : Yes
    >>>> PAT - Page Attribute Table : Yes
    >>>> PSE36 - 36-bit Page Size Extension : Yes
    >>>> PSN - Unique Serial Number : No
    >>>> CLF - Cache Line Flush Support : Yes
    >>>> DS - Debug Trace & EMON Store : Yes
    >>>> ACPI - Software Clock Control : Yes
    >>>> (W)MMX Technology : Yes
    >>>> FXSR - Fast Float Save & Restore : Yes
    >>>> SSE Technology : Yes
    >>>> SSE2 Technology : Yes
    >>>> SS - Self Snoop : Yes
    >>>> HTT - Hyper-Threading Technology : Yes
    >>>> TM - Thermal Monitor : Yes
    >>>> PBE - Pending Break Enable : Yes
    >>>> IA64 Technology : No
    >>>> SSE3 Technology : Yes
    >>>> MON - Monitor/MWait : Yes
    >>>> DSCPL - CPL qualified Debug Store : Yes
    >>>> EST - Enhanced SpeedStep Technology : No
    >>>> TM2 - Thermal Monitor 2 : No
    >>>> CID - Context ID : Yes
    >>>> xTPR - Send Task Priority Messages : Yes
    >>>> DAZ - Denormals Are Zero : Yes
    >>>> Advanced Settings
    >>>> Data Error Checking : No
    >>>> Fast Strings : No
    >>>> x86 FPU Compatibility Mode : No
    >>>> Prefetch Queue : Yes
    >>>> Branch Trace Storage : Yes
    >>>> Data Cache Active Mode : Yes
    >>>> IO Queue Depth : 12 request(s)
    >>>> TM - Thermal Monitor : Yes
    >>>> TM2 - Thermal Monitor 2 : No
    >>>> Specific Platform Requirements : No
    >>>> Control Temperature : 68.0°C / 154.4°F
    >>>> Machine Check Architecture Settings
    >>>> Number of Reporting Banks : 4 bank(s)
    >>>> Extended Machine Check Support : Yes
    >>>> Number of Extended Reporting Banks : 12 bank(s)
    >>>> Variable Range MTRR Settings
    >>>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
    >>>> Fixed Range MTRR Settings
    >>>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
    >>>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
    >>>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
    >>>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
    >>>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
    >>>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
    >>>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
    >>>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
    >>>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
    >>>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
    >>>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
    >>>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
    >>>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
    >>>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
    >>>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
    >>>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
    >>>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
    >>>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
    >>>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
    >>>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
    >>>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
    >>>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
    >>>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
    >>>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
    >>>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
    >>>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
    >>>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
    >>>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
    >>>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
    >>>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
    >>>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
    >>>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
    >>>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
    >>>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
    >>>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
    >>>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
    >>>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
    >>>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
    >>>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
    >>>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
    >>>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
    >>>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
    >>>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
    >>>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
    >>>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
    >>>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
    >>>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
    >>>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
    >>>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
    >>>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
    >>>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
    >>>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
    >>>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
    >>>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
    >>>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
    >>>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
    >>>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
    >>>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
    >>>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
    >>>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
    >>>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
    >>>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
    >>>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
    >>>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
    >>>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
    >>>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
    >>>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
    >>>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
    >>>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
    >>>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
    >>>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
    >>>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
    >>>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
    >>>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
    >>>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
    >>>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
    >>>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
    >>>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
    >>>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
    >>>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
    >>>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
    >>>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
    >>>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
    >>>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
    >>>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
    >>>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
    >>>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
    >>>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
    >>>> PAT Settings
    >>>> PAT 0 : WB
    >>>> PAT 1 : WC
    >>>> PAT 2 : UC-
    >>>> PAT 3 : UC
    >>>> PAT 4 : WB
    >>>> PAT 5 : WC
    >>>> PAT 6 : UC-
    >>>> PAT 7 : UC
    >>>> Performance Tips
    >>>> Notice 224 : SMBIOS/DMI information may be inaccurate.
    >>>>
    >>>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>>
    >>>> Tip 2 : Double-click tip or press Enter while a tip is selected for
    >>>> more information about the tip.

    >>




    --
    Using Opera's revolutionary e-mail client: http://www.opera.com/mail/
     
  6. Evert Meulie

    Evert Meulie Guest

    I'll check out Sandra when I get home, and see what it reports on my
    SB81P... :cool:



    Nils Langeland wrote:
    > Hello, again,
    > I upgraded the BIOS using WinFlash, went like a breeze, but Sandra
    > still reports the same thing about fan-failure.
    > CPU-temperature is on a steady 55.
    >
    > Are there any settings in the BIOS-setup that would need checking?
    > Oddly, I'm not able to get the "Num-Lock on at startup" to work, either.
    > Cheers Nils
    >
    > On Wed, 05 Jan 2005 10:46:57 +0100, Evert Meulie <>
    > wrote:
    >
    >> Why not do it the east way and use Winflash to flash from Windoze?
    >> Then all you need is that .bin file... :cool:
    >>
    >> Greetz,
    >> Evert
    >>
    >> Nils Langeland wrote:
    >>
    >>> Thanks Evert.
    >>> Do you have a straight-forward procedure for flashing the BIOS?
    >>> I only find a .bin file on SHUTTLE, but that's not enough for
    >>> flashing from a floppy - or?
    >>> Nils
    >>> On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie
    >>> <> wrote:
    >>>
    >>>> Does your SB81P has the most recent BIOS? Shuttle has made some
    >>>> changes in the thermal config lately...
    >>>>
    >>>> Regards,
    >>>> Evert
    >>>>
    >>>> Nils Langeland wrote:
    >>>>
    >>>>> Hello,
    >>>>> I have been runnning my SB81P for a wwek now, with no problems.
    >>>>> Then, using SiSoft Sandra 2005, i see the following:
    >>>>> Relevant lines marked with >>>
    >>>>>
    >>>>>>>> Auto Fan Speed Control : No
    >>>>>
    >>>>>
    >>>>>
    >>>>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>>>
    >>>>>
    >>>>> CPU-Temp is at 55C, so cooling is taking place.
    >>>>> I do feel that the fan is noisy, doesn't seem to alter speed,
    >>>>> running at the same RPM all the time,
    >>>>> Any good advice out there?
    >>>>> Greetings from Nils Langeland
    >>>>> SiSoftware Sandra
    >>>>> Processor
    >>>>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
    >>>>> Speed : 3.22GHz
    >>>>> Performance Rating : PR4276 (estimated)
    >>>>> CPUs per Core : 1 Unit(s)
    >>>>> SMT Support : 2 Unit(s)
    >>>>> Type : Standard
    >>>>> Package : FC LGA775
    >>>>> Rated Speed/FSB : 3200MHz / 4x 200MHz
    >>>>> Multiplier : 16/1x
    >>>>> Minimum/Maximum Multiplier : 2/1x / 16/1x
    >>>>> Generation : G8
    >>>>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
    >>>>> Revision/Stepping : 3 / 4 (0)
    >>>>> Stepping Mask : D0
    >>>>> Microcode : MU0F340E
    >>>>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
    >>>>> Native Page Size : 4kB
    >>>>> Co-Processor (FPU)
    >>>>> Type : Built-in
    >>>>> Revision/Stepping : 3 / 4 (0)
    >>>>> Processor Cache(s)
    >>>>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
    >>>>> byte line size, 2 threads sharing
    >>>>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set,
    >>>>> 64 byte line size
    >>>>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
    >>>>> line size, 2 lines per sector, 2 threads sharing
    >>>>> L2 Cache Multiplier : 1/1x (3215MHz)
    >>>>> Upgradeability
    >>>>> Socket/Slot : Socket 478
    >>>>> Upgrade Interface : ZIF Socket
    >>>>> Supported Speed(s) : 3.22GHz+
    >>>>> Environment Monitor 1
    >>>>> Model : ITE IT8705/12 ISA
    >>>>> Mainboard Specific Support : No
    >>>>> Sensors
    >>>>> CPU Temperature : 55.0°C / 131.0°F td
    >>>>>
    >>>>>>>> Auto Fan Speed Control : No
    >>>>>
    >>>>>
    >>>>> CPU Fan Speed : 654rpm
    >>>>> CPU Voltage : 1.30V
    >>>>> Features
    >>>>> FPU - Co-Processor Built-in : Yes
    >>>>> VME - Virtual Mode Extensions : Yes
    >>>>> DE - Debugging Extension : Yes
    >>>>> PSE - Page Size Extension : Yes
    >>>>> TSC - Time Stamp Counter : Yes
    >>>>> MSR - Model Specific Registers : Yes
    >>>>> PAE - Physical Address Extension : Yes
    >>>>> MCE - Machine Check Exception : Yes
    >>>>> CX8 - Compare & Exchange Instruction : Yes
    >>>>> APIC - Local APIC Built-in : Yes
    >>>>> SEP - Fast System Call : Yes
    >>>>> MTRR - Memory Type Range Registers : Yes
    >>>>> PGE - Page Global Enable : Yes
    >>>>> MCA - Machine Check Architecture : Yes
    >>>>> PAT - Page Attribute Table : Yes
    >>>>> PSE36 - 36-bit Page Size Extension : Yes
    >>>>> PSN - Unique Serial Number : No
    >>>>> CLF - Cache Line Flush Support : Yes
    >>>>> DS - Debug Trace & EMON Store : Yes
    >>>>> ACPI - Software Clock Control : Yes
    >>>>> (W)MMX Technology : Yes
    >>>>> FXSR - Fast Float Save & Restore : Yes
    >>>>> SSE Technology : Yes
    >>>>> SSE2 Technology : Yes
    >>>>> SS - Self Snoop : Yes
    >>>>> HTT - Hyper-Threading Technology : Yes
    >>>>> TM - Thermal Monitor : Yes
    >>>>> PBE - Pending Break Enable : Yes
    >>>>> IA64 Technology : No
    >>>>> SSE3 Technology : Yes
    >>>>> MON - Monitor/MWait : Yes
    >>>>> DSCPL - CPL qualified Debug Store : Yes
    >>>>> EST - Enhanced SpeedStep Technology : No
    >>>>> TM2 - Thermal Monitor 2 : No
    >>>>> CID - Context ID : Yes
    >>>>> xTPR - Send Task Priority Messages : Yes
    >>>>> DAZ - Denormals Are Zero : Yes
    >>>>> Advanced Settings
    >>>>> Data Error Checking : No
    >>>>> Fast Strings : No
    >>>>> x86 FPU Compatibility Mode : No
    >>>>> Prefetch Queue : Yes
    >>>>> Branch Trace Storage : Yes
    >>>>> Data Cache Active Mode : Yes
    >>>>> IO Queue Depth : 12 request(s)
    >>>>> TM - Thermal Monitor : Yes
    >>>>> TM2 - Thermal Monitor 2 : No
    >>>>> Specific Platform Requirements : No
    >>>>> Control Temperature : 68.0°C / 154.4°F
    >>>>> Machine Check Architecture Settings
    >>>>> Number of Reporting Banks : 4 bank(s)
    >>>>> Extended Machine Check Support : Yes
    >>>>> Number of Extended Reporting Banks : 12 bank(s)
    >>>>> Variable Range MTRR Settings
    >>>>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
    >>>>> Fixed Range MTRR Settings
    >>>>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
    >>>>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
    >>>>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
    >>>>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
    >>>>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
    >>>>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
    >>>>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
    >>>>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
    >>>>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
    >>>>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
    >>>>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
    >>>>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
    >>>>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
    >>>>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
    >>>>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
    >>>>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
    >>>>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
    >>>>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
    >>>>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
    >>>>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
    >>>>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
    >>>>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
    >>>>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
    >>>>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
    >>>>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
    >>>>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
    >>>>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
    >>>>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
    >>>>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
    >>>>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
    >>>>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
    >>>>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
    >>>>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
    >>>>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
    >>>>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
    >>>>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
    >>>>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
    >>>>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
    >>>>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
    >>>>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
    >>>>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
    >>>>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
    >>>>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
    >>>>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
    >>>>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
    >>>>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
    >>>>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
    >>>>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
    >>>>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
    >>>>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
    >>>>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
    >>>>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
    >>>>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
    >>>>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
    >>>>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
    >>>>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
    >>>>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
    >>>>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
    >>>>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
    >>>>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
    >>>>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
    >>>>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
    >>>>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
    >>>>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
    >>>>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
    >>>>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
    >>>>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
    >>>>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
    >>>>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
    >>>>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
    >>>>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
    >>>>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
    >>>>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
    >>>>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
    >>>>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
    >>>>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
    >>>>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
    >>>>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
    >>>>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
    >>>>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
    >>>>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
    >>>>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
    >>>>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
    >>>>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
    >>>>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
    >>>>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
    >>>>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
    >>>>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
    >>>>> PAT Settings
    >>>>> PAT 0 : WB
    >>>>> PAT 1 : WC
    >>>>> PAT 2 : UC-
    >>>>> PAT 3 : UC
    >>>>> PAT 4 : WB
    >>>>> PAT 5 : WC
    >>>>> PAT 6 : UC-
    >>>>> PAT 7 : UC
    >>>>> Performance Tips
    >>>>> Notice 224 : SMBIOS/DMI information may be inaccurate.
    >>>>>
    >>>>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>>>
    >>>>>
    >>>>> Tip 2 : Double-click tip or press Enter while a tip is selected
    >>>>> for more information about the tip.
    >>>
    >>>

    >
    >
    >
     
  7. Evert Meulie

    Evert Meulie Guest

    Hmm, Sandra reports that the CPI-fan of my SB81P isn't working either,
    but I know it is. Looks like Sandra isn't reporting the truth here. If
    you have a spare minute, you might wanna report it to them... :cool:

    Regards,
    Evert

    Evert Meulie wrote:
    > I'll check out Sandra when I get home, and see what it reports on my
    > SB81P... :cool:
    >
    >
    >
    > Nils Langeland wrote:
    >
    >> Hello, again,
    >> I upgraded the BIOS using WinFlash, went like a breeze, but Sandra
    >> still reports the same thing about fan-failure.
    >> CPU-temperature is on a steady 55.
    >>
    >> Are there any settings in the BIOS-setup that would need checking?
    >> Oddly, I'm not able to get the "Num-Lock on at startup" to work, either.
    >> Cheers Nils
    >>
    >> On Wed, 05 Jan 2005 10:46:57 +0100, Evert Meulie <>
    >> wrote:
    >>
    >>> Why not do it the east way and use Winflash to flash from Windoze?
    >>> Then all you need is that .bin file... :cool:
    >>>
    >>> Greetz,
    >>> Evert
    >>>
    >>> Nils Langeland wrote:
    >>>
    >>>> Thanks Evert.
    >>>> Do you have a straight-forward procedure for flashing the BIOS?
    >>>> I only find a .bin file on SHUTTLE, but that's not enough for
    >>>> flashing from a floppy - or?
    >>>> Nils
    >>>> On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie
    >>>> <> wrote:
    >>>>
    >>>>> Does your SB81P has the most recent BIOS? Shuttle has made some
    >>>>> changes in the thermal config lately...
    >>>>>
    >>>>> Regards,
    >>>>> Evert
    >>>>>
    >>>>> Nils Langeland wrote:
    >>>>>
    >>>>>> Hello,
    >>>>>> I have been runnning my SB81P for a wwek now, with no problems.
    >>>>>> Then, using SiSoft Sandra 2005, i see the following:
    >>>>>> Relevant lines marked with >>>
    >>>>>>
    >>>>>>>>> Auto Fan Speed Control : No
    >>>>>>
    >>>>>>
    >>>>>>
    >>>>>>
    >>>>>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>>>>
    >>>>>>
    >>>>>>
    >>>>>> CPU-Temp is at 55C, so cooling is taking place.
    >>>>>> I do feel that the fan is noisy, doesn't seem to alter speed,
    >>>>>> running at the same RPM all the time,
    >>>>>> Any good advice out there?
    >>>>>> Greetings from Nils Langeland
    >>>>>> SiSoftware Sandra
    >>>>>> Processor
    >>>>>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
    >>>>>> Speed : 3.22GHz
    >>>>>> Performance Rating : PR4276 (estimated)
    >>>>>> CPUs per Core : 1 Unit(s)
    >>>>>> SMT Support : 2 Unit(s)
    >>>>>> Type : Standard
    >>>>>> Package : FC LGA775
    >>>>>> Rated Speed/FSB : 3200MHz / 4x 200MHz
    >>>>>> Multiplier : 16/1x
    >>>>>> Minimum/Maximum Multiplier : 2/1x / 16/1x
    >>>>>> Generation : G8
    >>>>>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
    >>>>>> Revision/Stepping : 3 / 4 (0)
    >>>>>> Stepping Mask : D0
    >>>>>> Microcode : MU0F340E
    >>>>>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
    >>>>>> Native Page Size : 4kB
    >>>>>> Co-Processor (FPU)
    >>>>>> Type : Built-in
    >>>>>> Revision/Stepping : 3 / 4 (0)
    >>>>>> Processor Cache(s)
    >>>>>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
    >>>>>> byte line size, 2 threads sharing
    >>>>>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set,
    >>>>>> 64 byte line size
    >>>>>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
    >>>>>> line size, 2 lines per sector, 2 threads sharing
    >>>>>> L2 Cache Multiplier : 1/1x (3215MHz)
    >>>>>> Upgradeability
    >>>>>> Socket/Slot : Socket 478
    >>>>>> Upgrade Interface : ZIF Socket
    >>>>>> Supported Speed(s) : 3.22GHz+
    >>>>>> Environment Monitor 1
    >>>>>> Model : ITE IT8705/12 ISA
    >>>>>> Mainboard Specific Support : No
    >>>>>> Sensors
    >>>>>> CPU Temperature : 55.0°C / 131.0°F td
    >>>>>>
    >>>>>>>>> Auto Fan Speed Control : No
    >>>>>>
    >>>>>>
    >>>>>>
    >>>>>> CPU Fan Speed : 654rpm
    >>>>>> CPU Voltage : 1.30V
    >>>>>> Features
    >>>>>> FPU - Co-Processor Built-in : Yes
    >>>>>> VME - Virtual Mode Extensions : Yes
    >>>>>> DE - Debugging Extension : Yes
    >>>>>> PSE - Page Size Extension : Yes
    >>>>>> TSC - Time Stamp Counter : Yes
    >>>>>> MSR - Model Specific Registers : Yes
    >>>>>> PAE - Physical Address Extension : Yes
    >>>>>> MCE - Machine Check Exception : Yes
    >>>>>> CX8 - Compare & Exchange Instruction : Yes
    >>>>>> APIC - Local APIC Built-in : Yes
    >>>>>> SEP - Fast System Call : Yes
    >>>>>> MTRR - Memory Type Range Registers : Yes
    >>>>>> PGE - Page Global Enable : Yes
    >>>>>> MCA - Machine Check Architecture : Yes
    >>>>>> PAT - Page Attribute Table : Yes
    >>>>>> PSE36 - 36-bit Page Size Extension : Yes
    >>>>>> PSN - Unique Serial Number : No
    >>>>>> CLF - Cache Line Flush Support : Yes
    >>>>>> DS - Debug Trace & EMON Store : Yes
    >>>>>> ACPI - Software Clock Control : Yes
    >>>>>> (W)MMX Technology : Yes
    >>>>>> FXSR - Fast Float Save & Restore : Yes
    >>>>>> SSE Technology : Yes
    >>>>>> SSE2 Technology : Yes
    >>>>>> SS - Self Snoop : Yes
    >>>>>> HTT - Hyper-Threading Technology : Yes
    >>>>>> TM - Thermal Monitor : Yes
    >>>>>> PBE - Pending Break Enable : Yes
    >>>>>> IA64 Technology : No
    >>>>>> SSE3 Technology : Yes
    >>>>>> MON - Monitor/MWait : Yes
    >>>>>> DSCPL - CPL qualified Debug Store : Yes
    >>>>>> EST - Enhanced SpeedStep Technology : No
    >>>>>> TM2 - Thermal Monitor 2 : No
    >>>>>> CID - Context ID : Yes
    >>>>>> xTPR - Send Task Priority Messages : Yes
    >>>>>> DAZ - Denormals Are Zero : Yes
    >>>>>> Advanced Settings
    >>>>>> Data Error Checking : No
    >>>>>> Fast Strings : No
    >>>>>> x86 FPU Compatibility Mode : No
    >>>>>> Prefetch Queue : Yes
    >>>>>> Branch Trace Storage : Yes
    >>>>>> Data Cache Active Mode : Yes
    >>>>>> IO Queue Depth : 12 request(s)
    >>>>>> TM - Thermal Monitor : Yes
    >>>>>> TM2 - Thermal Monitor 2 : No
    >>>>>> Specific Platform Requirements : No
    >>>>>> Control Temperature : 68.0°C / 154.4°F
    >>>>>> Machine Check Architecture Settings
    >>>>>> Number of Reporting Banks : 4 bank(s)
    >>>>>> Extended Machine Check Support : Yes
    >>>>>> Number of Extended Reporting Banks : 12 bank(s)
    >>>>>> Variable Range MTRR Settings
    >>>>>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
    >>>>>> Fixed Range MTRR Settings
    >>>>>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
    >>>>>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
    >>>>>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
    >>>>>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
    >>>>>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
    >>>>>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
    >>>>>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
    >>>>>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
    >>>>>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
    >>>>>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
    >>>>>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
    >>>>>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
    >>>>>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
    >>>>>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
    >>>>>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
    >>>>>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
    >>>>>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
    >>>>>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
    >>>>>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
    >>>>>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
    >>>>>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
    >>>>>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
    >>>>>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
    >>>>>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
    >>>>>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
    >>>>>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
    >>>>>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
    >>>>>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
    >>>>>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
    >>>>>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
    >>>>>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
    >>>>>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
    >>>>>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
    >>>>>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
    >>>>>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
    >>>>>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
    >>>>>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
    >>>>>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
    >>>>>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
    >>>>>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
    >>>>>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
    >>>>>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
    >>>>>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
    >>>>>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
    >>>>>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
    >>>>>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
    >>>>>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
    >>>>>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
    >>>>>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
    >>>>>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
    >>>>>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
    >>>>>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
    >>>>>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
    >>>>>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
    >>>>>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
    >>>>>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
    >>>>>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
    >>>>>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
    >>>>>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
    >>>>>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
    >>>>>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
    >>>>>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
    >>>>>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
    >>>>>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
    >>>>>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
    >>>>>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
    >>>>>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
    >>>>>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
    >>>>>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
    >>>>>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
    >>>>>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
    >>>>>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
    >>>>>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
    >>>>>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
    >>>>>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
    >>>>>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
    >>>>>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
    >>>>>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
    >>>>>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
    >>>>>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
    >>>>>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
    >>>>>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
    >>>>>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
    >>>>>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
    >>>>>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
    >>>>>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
    >>>>>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
    >>>>>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
    >>>>>> PAT Settings
    >>>>>> PAT 0 : WB
    >>>>>> PAT 1 : WC
    >>>>>> PAT 2 : UC-
    >>>>>> PAT 3 : UC
    >>>>>> PAT 4 : WB
    >>>>>> PAT 5 : WC
    >>>>>> PAT 6 : UC-
    >>>>>> PAT 7 : UC
    >>>>>> Performance Tips
    >>>>>> Notice 224 : SMBIOS/DMI information may be inaccurate.
    >>>>>>
    >>>>>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>>>>
    >>>>>>
    >>>>>>
    >>>>>> Tip 2 : Double-click tip or press Enter while a tip is selected
    >>>>>> for more information about the tip.
    >>>>
    >>>>
    >>>>

    >>
    >>
    >>
     
  8. Nils

    Nils Guest

    Here's the answer from SiSoft Sandra. Now, I don't know how to detect which
    fans are reported as what. Anyone out there able to help?



    Nils

    *****************************************************

    Answer fron SiSoftSandra Support:

    There is no way to know in software which fan is which, which temperature is
    which and so on; the program assumes the implementation guidelines of the
    specific hardware monitor device are followed by the manufacturer.

    You cannot compare the customised version of the monitoring application
    supplied with the board (they make it so they should know which is which)
    with a generic program like Sandra that runs on thousands of different
    boards. This affects other such utilities that generally ask you to tell
    them which sensor is which - Sandra attempts to do this automatically.

    The Sandra database already contains a patch table for around 700 mainboards
    that are non-confirmant and need to be patched; naturally we cannot buy and
    test each and every board on the market. If you send us a copy of the output
    of "Mainboard Info" and tell us which fans/temperature/voltage sensors are
    which we will add it to the patch table.



    Thank you.

    --

    C. Adrian Silasi

    SiSoftware (EU)



    http://www.sisoftware.net

    *Other brands and names are the property of their respective owners.

    NB: Be sure to include prior emails in your reply or we may not be able to
    help you. We receive many emails per day and need all the information in
    front of us.

    Email: Please remember that email is not entirely reliable. Please ask for
    read/receive confirmation and send one in return. Do resend any email
    unanswered within a reasonable amount of time. Ensure that the reply-to
    address is valid and operational.

    Non-Disclosure: Please do not publish or quote any parts of this message
    without authorisation. Unless otherwise specified, this message is not meant
    for publication or quotation.

    Confidentiality: If you are not the intended recipient, you must not read
    this message nor cause its contents to be disclosed to anyone else. If you
    receive this email in error, please advise us immediately and delete the
    email.

    Attachments: We have taken every reasonable precaution to ensure that any
    attachment to this email has been swept for viruses. However, we cannot
    accept liability for any damage sustained as a result of viruses and would
    advise that you carry out your own virus checks before opening any
    attachment.







    -----Original Message-----

    From: Nils Langeland [mailto:]

    Sent: 10 January 2005 19:33

    To:

    Subject: Query



    Hello,

    I have been runnning my SHUTTLE SB81P for a week now, with no problems.

    Then, using SiSoft Sandra 2005, I see the following: Relevant lines marked

    with >>>

    >>> Auto Fan Speed Control : No


    >>> Warning 216 : CPU fan has failed! Check it.


    CPU-Temp is at 55C, so cooling is taking place.

    I do feel that the fan is noisy, doesn't seem to alter speed, running at

    the same RPM all the time,

    Is there a bug in the program, so that it gives these messages? The CPUfan

    IS running, and doing its job CPUtemperature is at 55C

    Greetings from Nils Langeland







    SiSoftware Sandra

    Processor

    Model : Intel(R) Pentium(R) 4 CPU 3.20GHz

    Speed : 3.22GHz

    Performance Rating : PR4276 (estimated)

    CPUs per Core : 1 Unit(s)

    SMT Support : 2 Unit(s)

    Type : Standard

    Package : FC LGA775

    Rated Speed/FSB : 3200MHz / 4x 200MHz

    Multiplier : 16/1x

    Minimum/Maximum Multiplier : 2/1x / 16/1x

    Generation : G8

    Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V Revision/Stepping

    : 3 / 4 (0) Stepping Mask : D0 Microcode : MU0F340E Maximum Physical /

    Virtual Addressing : 36-bit / 32-bit Native Page Size : 4kB

    Co-Processor (FPU)

    Type : Built-in

    Revision/Stepping : 3 / 4 (0)

    Processor Cache(s)

    Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64 byte

    line size, 2 threads sharing

    Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64 byte

    line size

    L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte line

    size, 2 lines per sector, 2 threads sharing

    L2 Cache Multiplier : 1/1x (3215MHz)

    Upgradeability

    Socket/Slot : Socket 478

    Upgrade Interface : ZIF Socket

    Supported Speed(s) : 3.22GHz+

    Environment Monitor 1

    Model : ITE IT8705/12 ISA

    Mainboard Specific Support : No

    Sensors

    CPU Temperature : 55.0°C / 131.0°F td

    >>> Auto Fan Speed Control : No


    CPU Fan Speed : 654rpm

    CPU Voltage : 1.30V

    Features

    FPU - Co-Processor Built-in : Yes

    VME - Virtual Mode Extensions : Yes

    DE - Debugging Extension : Yes

    PSE - Page Size Extension : Yes

    TSC - Time Stamp Counter : Yes

    MSR - Model Specific Registers : Yes

    PAE - Physical Address Extension : Yes

    MCE - Machine Check Exception : Yes

    CX8 - Compare & Exchange Instruction : Yes

    APIC - Local APIC Built-in : Yes

    SEP - Fast System Call : Yes

    MTRR - Memory Type Range Registers : Yes

    PGE - Page Global Enable : Yes

    MCA - Machine Check Architecture : Yes

    PAT - Page Attribute Table : Yes

    PSE36 - 36-bit Page Size Extension : Yes

    PSN - Unique Serial Number : No

    CLF - Cache Line Flush Support : Yes

    DS - Debug Trace & EMON Store : Yes

    ACPI - Software Clock Control : Yes

    (W)MMX Technology : Yes

    FXSR - Fast Float Save & Restore : Yes

    SSE Technology : Yes

    SSE2 Technology : Yes

    SS - Self Snoop : Yes

    HTT - Hyper-Threading Technology : Yes

    TM - Thermal Monitor : Yes

    PBE - Pending Break Enable : Yes

    IA64 Technology : No

    SSE3 Technology : Yes

    MON - Monitor/MWait : Yes

    DSCPL - CPL qualified Debug Store : Yes

    EST - Enhanced SpeedStep Technology : No

    TM2 - Thermal Monitor 2 : No

    CID - Context ID : Yes

    xTPR - Send Task Priority Messages : Yes

    DAZ - Denormals Are Zero : Yes

    Advanced Settings

    Data Error Checking : No

    Fast Strings : No

    x86 FPU Compatibility Mode : No

    Prefetch Queue : Yes

    Branch Trace Storage : Yes

    Data Cache Active Mode : Yes

    IO Queue Depth : 12 request(s)

    TM - Thermal Monitor : Yes

    TM2 - Thermal Monitor 2 : No

    Specific Platform Requirements : No

    Control Temperature : 68.0°C / 154.4°F

    Machine Check Architecture Settings

    Number of Reporting Banks : 4 bank(s)

    Extended Machine Check Support : Yes

    Number of Extended Reporting Banks : 12 bank(s)

    Variable Range MTRR Settings

    MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB

    Fixed Range MTRR Settings

    MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB

    MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB

    MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB

    MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB

    MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB

    MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB

    MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB

    MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB

    MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB

    MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB

    MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB

    MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB

    MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB

    MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB

    MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB

    MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB

    MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC

    MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC

    MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC

    MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC

    MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC

    MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC

    MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC

    MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC

    MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC

    MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC

    MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC

    MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC

    MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC

    MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC

    MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC

    MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC

    MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC

    MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC

    MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC

    MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC

    MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC

    MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC

    MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC

    MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC

    MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC

    MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC

    MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC

    MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC

    MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC

    MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC

    MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC

    MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC

    MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC

    MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC

    MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC

    MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC

    MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC

    MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC

    MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC

    MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC

    MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC

    MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC

    MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC

    MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC

    MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC

    MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC

    MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC

    MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC

    MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC

    MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC

    MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC

    MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC

    MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC

    MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC

    MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC

    MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC

    MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT

    MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT

    MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT

    MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT

    MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT

    MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT

    MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT

    MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT

    MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT

    MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT

    MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT

    MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT

    MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT

    MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT

    MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT

    MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT

    PAT Settings

    PAT 0 : WB

    PAT 1 : WC

    PAT 2 : UC-

    PAT 3 : UC

    PAT 4 : WB

    PAT 5 : WC

    PAT 6 : UC-

    PAT 7 : UC

    Performance Tips

    Notice 224 : SMBIOS/DMI information may be inaccurate.

    >>> Warning 216 : CPU fan has failed! Check it.


    Tip 2 : Double-click tip or press Enter while a tip is selected for more

    information about the tip.







    "Evert Meulie" <> skrev i melding
    news:...
    > Hmm, Sandra reports that the CPI-fan of my SB81P isn't working either, but
    > I know it is. Looks like Sandra isn't reporting the truth here. If you
    > have a spare minute, you might wanna report it to them... :cool:
    >
    > Regards,
    > Evert
    >
    > Evert Meulie wrote:
    >> I'll check out Sandra when I get home, and see what it reports on my
    >> SB81P... :cool:
    >>
    >>
    >>
    >> Nils Langeland wrote:
    >>
    >>> Hello, again,
    >>> I upgraded the BIOS using WinFlash, went like a breeze, but Sandra still
    >>> reports the same thing about fan-failure.
    >>> CPU-temperature is on a steady 55.
    >>>
    >>> Are there any settings in the BIOS-setup that would need checking?
    >>> Oddly, I'm not able to get the "Num-Lock on at startup" to work, either.
    >>> Cheers Nils
    >>>
    >>> On Wed, 05 Jan 2005 10:46:57 +0100, Evert Meulie <>
    >>> wrote:
    >>>
    >>>> Why not do it the east way and use Winflash to flash from Windoze? Then
    >>>> all you need is that .bin file... :cool:
    >>>>
    >>>> Greetz,
    >>>> Evert
    >>>>
    >>>> Nils Langeland wrote:
    >>>>
    >>>>> Thanks Evert.
    >>>>> Do you have a straight-forward procedure for flashing the BIOS?
    >>>>> I only find a .bin file on SHUTTLE, but that's not enough for flashing
    >>>>> from a floppy - or?
    >>>>> Nils
    >>>>> On Wed, 05 Jan 2005 08:49:51 +0100, Evert Meulie <>
    >>>>> wrote:
    >>>>>
    >>>>>> Does your SB81P has the most recent BIOS? Shuttle has made some
    >>>>>> changes in the thermal config lately...
    >>>>>>
    >>>>>> Regards,
    >>>>>> Evert
    >>>>>>
    >>>>>> Nils Langeland wrote:
    >>>>>>
    >>>>>>> Hello,
    >>>>>>> I have been runnning my SB81P for a wwek now, with no problems.
    >>>>>>> Then, using SiSoft Sandra 2005, i see the following:
    >>>>>>> Relevant lines marked with >>>
    >>>>>>>
    >>>>>>>>>> Auto Fan Speed Control : No
    >>>>>>>
    >>>>>>>
    >>>>>>>
    >>>>>>>
    >>>>>>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>>>>>
    >>>>>>>
    >>>>>>>
    >>>>>>> CPU-Temp is at 55C, so cooling is taking place.
    >>>>>>> I do feel that the fan is noisy, doesn't seem to alter speed,
    >>>>>>> running at the same RPM all the time,
    >>>>>>> Any good advice out there?
    >>>>>>> Greetings from Nils Langeland
    >>>>>>> SiSoftware Sandra
    >>>>>>> Processor
    >>>>>>> Model : Intel(R) Pentium(R) 4 CPU 3.20GHz
    >>>>>>> Speed : 3.22GHz
    >>>>>>> Performance Rating : PR4276 (estimated)
    >>>>>>> CPUs per Core : 1 Unit(s)
    >>>>>>> SMT Support : 2 Unit(s)
    >>>>>>> Type : Standard
    >>>>>>> Package : FC LGA775
    >>>>>>> Rated Speed/FSB : 3200MHz / 4x 200MHz
    >>>>>>> Multiplier : 16/1x
    >>>>>>> Minimum/Maximum Multiplier : 2/1x / 16/1x
    >>>>>>> Generation : G8
    >>>>>>> Name : P4P (Prescott) Pentium 4E 90nm 2.8-4GHz 1.25-1.40V
    >>>>>>> Revision/Stepping : 3 / 4 (0)
    >>>>>>> Stepping Mask : D0
    >>>>>>> Microcode : MU0F340E
    >>>>>>> Maximum Physical / Virtual Addressing : 36-bit / 32-bit
    >>>>>>> Native Page Size : 4kB
    >>>>>>> Co-Processor (FPU)
    >>>>>>> Type : Built-in
    >>>>>>> Revision/Stepping : 3 / 4 (0)
    >>>>>>> Processor Cache(s)
    >>>>>>> Internal Data Cache : 16kB Synchronous, Write-Thru, 8-way set, 64
    >>>>>>> byte line size, 2 threads sharing
    >>>>>>> Internal Trace Cache : 12kB Synchronous, Write-Thru, 8-way set, 64
    >>>>>>> byte line size
    >>>>>>> L2 On-board Cache : 1MB ECC Synchronous, ATC, 8-way set, 64 byte
    >>>>>>> line size, 2 lines per sector, 2 threads sharing
    >>>>>>> L2 Cache Multiplier : 1/1x (3215MHz)
    >>>>>>> Upgradeability
    >>>>>>> Socket/Slot : Socket 478
    >>>>>>> Upgrade Interface : ZIF Socket
    >>>>>>> Supported Speed(s) : 3.22GHz+
    >>>>>>> Environment Monitor 1
    >>>>>>> Model : ITE IT8705/12 ISA
    >>>>>>> Mainboard Specific Support : No
    >>>>>>> Sensors
    >>>>>>> CPU Temperature : 55.0°C / 131.0°F td
    >>>>>>>
    >>>>>>>>>> Auto Fan Speed Control : No
    >>>>>>>
    >>>>>>>
    >>>>>>>
    >>>>>>> CPU Fan Speed : 654rpm
    >>>>>>> CPU Voltage : 1.30V
    >>>>>>> Features
    >>>>>>> FPU - Co-Processor Built-in : Yes
    >>>>>>> VME - Virtual Mode Extensions : Yes
    >>>>>>> DE - Debugging Extension : Yes
    >>>>>>> PSE - Page Size Extension : Yes
    >>>>>>> TSC - Time Stamp Counter : Yes
    >>>>>>> MSR - Model Specific Registers : Yes
    >>>>>>> PAE - Physical Address Extension : Yes
    >>>>>>> MCE - Machine Check Exception : Yes
    >>>>>>> CX8 - Compare & Exchange Instruction : Yes
    >>>>>>> APIC - Local APIC Built-in : Yes
    >>>>>>> SEP - Fast System Call : Yes
    >>>>>>> MTRR - Memory Type Range Registers : Yes
    >>>>>>> PGE - Page Global Enable : Yes
    >>>>>>> MCA - Machine Check Architecture : Yes
    >>>>>>> PAT - Page Attribute Table : Yes
    >>>>>>> PSE36 - 36-bit Page Size Extension : Yes
    >>>>>>> PSN - Unique Serial Number : No
    >>>>>>> CLF - Cache Line Flush Support : Yes
    >>>>>>> DS - Debug Trace & EMON Store : Yes
    >>>>>>> ACPI - Software Clock Control : Yes
    >>>>>>> (W)MMX Technology : Yes
    >>>>>>> FXSR - Fast Float Save & Restore : Yes
    >>>>>>> SSE Technology : Yes
    >>>>>>> SSE2 Technology : Yes
    >>>>>>> SS - Self Snoop : Yes
    >>>>>>> HTT - Hyper-Threading Technology : Yes
    >>>>>>> TM - Thermal Monitor : Yes
    >>>>>>> PBE - Pending Break Enable : Yes
    >>>>>>> IA64 Technology : No
    >>>>>>> SSE3 Technology : Yes
    >>>>>>> MON - Monitor/MWait : Yes
    >>>>>>> DSCPL - CPL qualified Debug Store : Yes
    >>>>>>> EST - Enhanced SpeedStep Technology : No
    >>>>>>> TM2 - Thermal Monitor 2 : No
    >>>>>>> CID - Context ID : Yes
    >>>>>>> xTPR - Send Task Priority Messages : Yes
    >>>>>>> DAZ - Denormals Are Zero : Yes
    >>>>>>> Advanced Settings
    >>>>>>> Data Error Checking : No
    >>>>>>> Fast Strings : No
    >>>>>>> x86 FPU Compatibility Mode : No
    >>>>>>> Prefetch Queue : Yes
    >>>>>>> Branch Trace Storage : Yes
    >>>>>>> Data Cache Active Mode : Yes
    >>>>>>> IO Queue Depth : 12 request(s)
    >>>>>>> TM - Thermal Monitor : Yes
    >>>>>>> TM2 - Thermal Monitor 2 : No
    >>>>>>> Specific Platform Requirements : No
    >>>>>>> Control Temperature : 68.0°C / 154.4°F
    >>>>>>> Machine Check Architecture Settings
    >>>>>>> Number of Reporting Banks : 4 bank(s)
    >>>>>>> Extended Machine Check Support : Yes
    >>>>>>> Number of Extended Reporting Banks : 12 bank(s)
    >>>>>>> Variable Range MTRR Settings
    >>>>>>> MTRR 0 : 00000000-3FFFFFFF (0MB-1024MB) WB
    >>>>>>> Fixed Range MTRR Settings
    >>>>>>> MTRR 0 Range 0 : 00000000-0000FFFF (0kB-64kB) WB
    >>>>>>> MTRR 0 Range 1 : 00010000-0001FFFF (64kB-128kB) WB
    >>>>>>> MTRR 0 Range 2 : 00020000-0002FFFF (128kB-192kB) WB
    >>>>>>> MTRR 0 Range 3 : 00030000-0003FFFF (192kB-256kB) WB
    >>>>>>> MTRR 0 Range 4 : 00040000-0004FFFF (256kB-320kB) WB
    >>>>>>> MTRR 0 Range 5 : 00050000-0005FFFF (320kB-384kB) WB
    >>>>>>> MTRR 0 Range 6 : 00060000-0006FFFF (384kB-448kB) WB
    >>>>>>> MTRR 0 Range 7 : 00070000-0007FFFF (448kB-512kB) WB
    >>>>>>> MTRR 1 Range 0 : 00080000-00083FFF (512kB-528kB) WB
    >>>>>>> MTRR 1 Range 1 : 00084000-00087FFF (528kB-544kB) WB
    >>>>>>> MTRR 1 Range 2 : 00088000-0008BFFF (544kB-560kB) WB
    >>>>>>> MTRR 1 Range 3 : 0008C000-0008FFFF (560kB-576kB) WB
    >>>>>>> MTRR 1 Range 4 : 00090000-00093FFF (576kB-592kB) WB
    >>>>>>> MTRR 1 Range 5 : 00094000-00097FFF (592kB-608kB) WB
    >>>>>>> MTRR 1 Range 6 : 00098000-0009BFFF (608kB-624kB) WB
    >>>>>>> MTRR 1 Range 7 : 0009C000-0009FFFF (624kB-640kB) WB
    >>>>>>> MTRR 2 Range 0 : 000A0000-000A3FFF (640kB-656kB) UC
    >>>>>>> MTRR 2 Range 1 : 000A4000-000A7FFF (656kB-672kB) UC
    >>>>>>> MTRR 2 Range 2 : 000A8000-000ABFFF (672kB-688kB) UC
    >>>>>>> MTRR 2 Range 3 : 000AC000-000AFFFF (688kB-704kB) UC
    >>>>>>> MTRR 2 Range 4 : 000B0000-000B3FFF (704kB-720kB) UC
    >>>>>>> MTRR 2 Range 5 : 000B4000-000B7FFF (720kB-736kB) UC
    >>>>>>> MTRR 2 Range 6 : 000B8000-000BBFFF (736kB-752kB) UC
    >>>>>>> MTRR 2 Range 7 : 000BC000-000BFFFF (752kB-768kB) UC
    >>>>>>> MTRR 3 Range 0 : 000C0000-000C0FFF (768kB-772kB) UC
    >>>>>>> MTRR 3 Range 1 : 000C1000-000C1FFF (772kB-776kB) UC
    >>>>>>> MTRR 3 Range 2 : 000C2000-000C2FFF (776kB-780kB) UC
    >>>>>>> MTRR 3 Range 3 : 000C3000-000C3FFF (780kB-784kB) UC
    >>>>>>> MTRR 3 Range 4 : 000C4000-000C4FFF (784kB-788kB) UC
    >>>>>>> MTRR 3 Range 5 : 000C5000-000C5FFF (788kB-792kB) UC
    >>>>>>> MTRR 3 Range 6 : 000C6000-000C6FFF (792kB-796kB) UC
    >>>>>>> MTRR 3 Range 7 : 000C7000-000C7FFF (796kB-800kB) UC
    >>>>>>> MTRR 4 Range 0 : 000C8000-000C8FFF (800kB-804kB) UC
    >>>>>>> MTRR 4 Range 1 : 000C9000-000C9FFF (804kB-808kB) UC
    >>>>>>> MTRR 4 Range 2 : 000CA000-000CAFFF (808kB-812kB) UC
    >>>>>>> MTRR 4 Range 3 : 000CB000-000CBFFF (812kB-816kB) UC
    >>>>>>> MTRR 4 Range 4 : 000CC000-000CCFFF (816kB-820kB) UC
    >>>>>>> MTRR 4 Range 5 : 000CD000-000CDFFF (820kB-824kB) UC
    >>>>>>> MTRR 4 Range 6 : 000CE000-000CEFFF (824kB-828kB) UC
    >>>>>>> MTRR 4 Range 7 : 000CF000-000CFFFF (828kB-832kB) UC
    >>>>>>> MTRR 5 Range 0 : 000D0000-000D0FFF (832kB-836kB) UC
    >>>>>>> MTRR 5 Range 1 : 000D1000-000D1FFF (836kB-840kB) UC
    >>>>>>> MTRR 5 Range 2 : 000D2000-000D2FFF (840kB-844kB) UC
    >>>>>>> MTRR 5 Range 3 : 000D3000-000D3FFF (844kB-848kB) UC
    >>>>>>> MTRR 5 Range 4 : 000D4000-000D4FFF (848kB-852kB) UC
    >>>>>>> MTRR 5 Range 5 : 000D5000-000D5FFF (852kB-856kB) UC
    >>>>>>> MTRR 5 Range 6 : 000D6000-000D6FFF (856kB-860kB) UC
    >>>>>>> MTRR 5 Range 7 : 000D7000-000D7FFF (860kB-864kB) UC
    >>>>>>> MTRR 6 Range 0 : 000D8000-000D8FFF (864kB-868kB) UC
    >>>>>>> MTRR 6 Range 1 : 000D9000-000D9FFF (868kB-872kB) UC
    >>>>>>> MTRR 6 Range 2 : 000DA000-000DAFFF (872kB-876kB) UC
    >>>>>>> MTRR 6 Range 3 : 000DB000-000DBFFF (876kB-880kB) UC
    >>>>>>> MTRR 6 Range 4 : 000DC000-000DCFFF (880kB-884kB) UC
    >>>>>>> MTRR 6 Range 5 : 000DD000-000DDFFF (884kB-888kB) UC
    >>>>>>> MTRR 6 Range 6 : 000DE000-000DEFFF (888kB-892kB) UC
    >>>>>>> MTRR 6 Range 7 : 000DF000-000DFFFF (892kB-896kB) UC
    >>>>>>> MTRR 7 Range 0 : 000E0000-000E0FFF (896kB-900kB) UC
    >>>>>>> MTRR 7 Range 1 : 000E1000-000E1FFF (900kB-904kB) UC
    >>>>>>> MTRR 7 Range 2 : 000E2000-000E2FFF (904kB-908kB) UC
    >>>>>>> MTRR 7 Range 3 : 000E3000-000E3FFF (908kB-912kB) UC
    >>>>>>> MTRR 7 Range 4 : 000E4000-000E4FFF (912kB-916kB) UC
    >>>>>>> MTRR 7 Range 5 : 000E5000-000E5FFF (916kB-920kB) UC
    >>>>>>> MTRR 7 Range 6 : 000E6000-000E6FFF (920kB-924kB) UC
    >>>>>>> MTRR 7 Range 7 : 000E7000-000E7FFF (924kB-928kB) UC
    >>>>>>> MTRR 8 Range 0 : 000E8000-000E8FFF (928kB-932kB) UC
    >>>>>>> MTRR 8 Range 1 : 000E9000-000E9FFF (932kB-936kB) UC
    >>>>>>> MTRR 8 Range 2 : 000EA000-000EAFFF (936kB-940kB) UC
    >>>>>>> MTRR 8 Range 3 : 000EB000-000EBFFF (940kB-944kB) UC
    >>>>>>> MTRR 8 Range 4 : 000EC000-000ECFFF (944kB-948kB) UC
    >>>>>>> MTRR 8 Range 5 : 000ED000-000EDFFF (948kB-952kB) UC
    >>>>>>> MTRR 8 Range 6 : 000EE000-000EEFFF (952kB-956kB) UC
    >>>>>>> MTRR 8 Range 7 : 000EF000-000EFFFF (956kB-960kB) UC
    >>>>>>> MTRR 9 Range 0 : 000F0000-000F0FFF (960kB-964kB) WT
    >>>>>>> MTRR 9 Range 1 : 000F1000-000F1FFF (964kB-968kB) WT
    >>>>>>> MTRR 9 Range 2 : 000F2000-000F2FFF (968kB-972kB) WT
    >>>>>>> MTRR 9 Range 3 : 000F3000-000F3FFF (972kB-976kB) WT
    >>>>>>> MTRR 9 Range 4 : 000F4000-000F4FFF (976kB-980kB) WT
    >>>>>>> MTRR 9 Range 5 : 000F5000-000F5FFF (980kB-984kB) WT
    >>>>>>> MTRR 9 Range 6 : 000F6000-000F6FFF (984kB-988kB) WT
    >>>>>>> MTRR 9 Range 7 : 000F7000-000F7FFF (988kB-992kB) WT
    >>>>>>> MTRR 10 Range 0 : 000F8000-000F8FFF (992kB-996kB) WT
    >>>>>>> MTRR 10 Range 1 : 000F9000-000F9FFF (996kB-1000kB) WT
    >>>>>>> MTRR 10 Range 2 : 000FA000-000FAFFF (1000kB-1004kB) WT
    >>>>>>> MTRR 10 Range 3 : 000FB000-000FBFFF (1004kB-1008kB) WT
    >>>>>>> MTRR 10 Range 4 : 000FC000-000FCFFF (1008kB-1012kB) WT
    >>>>>>> MTRR 10 Range 5 : 000FD000-000FDFFF (1012kB-1016kB) WT
    >>>>>>> MTRR 10 Range 6 : 000FE000-000FEFFF (1016kB-1020kB) WT
    >>>>>>> MTRR 10 Range 7 : 000FF000-000FFFFF (1020kB-1024kB) WT
    >>>>>>> PAT Settings
    >>>>>>> PAT 0 : WB
    >>>>>>> PAT 1 : WC
    >>>>>>> PAT 2 : UC-
    >>>>>>> PAT 3 : UC
    >>>>>>> PAT 4 : WB
    >>>>>>> PAT 5 : WC
    >>>>>>> PAT 6 : UC-
    >>>>>>> PAT 7 : UC
    >>>>>>> Performance Tips
    >>>>>>> Notice 224 : SMBIOS/DMI information may be inaccurate.
    >>>>>>>
    >>>>>>>>>> Warning 216 : CPU fan has failed! Check it.
    >>>>>>>
    >>>>>>>
    >>>>>>>
    >>>>>>> Tip 2 : Double-click tip or press Enter while a tip is selected for
    >>>>>>> more information about the tip.
    >>>>>
    >>>>>
    >>>>>
    >>>
    >>>
    >>>
     
    1. Advertising

Want to reply to this thread or ask your own question?

It takes just 2 minutes to sign up (and it's free!). Just click the sign up button to choose a username and then you can ask your own questions on the forum.
Similar Threads
  1. dg
    Replies:
    1
    Views:
    321
  2. Thad Touchton

    Shuttle SB81P Questions

    Thad Touchton, Nov 2, 2004, in forum: Shuttle
    Replies:
    5
    Views:
    902
    Buzby
    Nov 30, 2004
  3. Simon Alexanderson
    Replies:
    7
    Views:
    841
  4. cybersoga
    Replies:
    0
    Views:
    1,017
    cybersoga
    Jan 17, 2005
  5. Bob Hyam

    Shuttle SB81P PVR

    Bob Hyam, Mar 19, 2005, in forum: Shuttle
    Replies:
    0
    Views:
    788
    Bob Hyam
    Mar 19, 2005
Loading...

Share This Page