win xp blue screen

Ok. And what about the hard disk? Or, the other things mentioned on
the page? Is the problem you are having similar to what is described
or different?

What makes you think you are loading the correct device driver at F6?
Reference your statement: "It doesn't matter if i hit f 6 or not". If
you need a device driver, and you don't give it one, then obviously
windows installation isn't going to find your disks and install the
operating system.

Have you tried the windows xp newsgroup?

Did you try testing the memory as Tom suggested?

What is the result of the check disk test you originally mentioned
that windows installation recommended?

In another thread, Jef found this for troubleshooting a 7b stop error:
http://support.microsoft.com/default...b;en-us;324103

Forrest

Motherboard Help By HAL web site:
http://home.comcast.net/~mobo.help/


On Sat, 3 Jun 2006 17:34:51 -0600, "bob h" <>
wrote:

>I'm using my original copy of win xp pro, not an oem
>when I hit f 6 i load the nv raid drivers on the disk that were supplied
>by mfg.
>by the way It doesn't matter if i hit f 6 or not , the screen will go black,
>then start up again, starting winxp setup over again , then the bsod with
>these #'s
>

a little past 1/4 the way thru install, win xp states that it cant find any
hdd"s so it will stop.
the hitachi feature tool detects all 4 hdd's.
is there a utility for partitioning a hdd in dos 7?
i have not tested mem, it new and works fine
my sys is this
SAPPHIRE 100106SR-RD Radeon X850XT 256MB GDDR3 PCI Express x16 Video Card
Antec true power 2 550 ATX12V 550W Power Supply
AMD Athlon 64 X2 4400+ Toledo 2000MHz HT Socket 939 Dual Core Processor
Model ADA4400CDBOX - Retail
CORSAIR XMS 2GB (2 x 1GB) 184-Pin DDR SDRAM DDR 400 (PC 3500) Unbuffered
Dual Channel Kit System Memory Model TWINX2048-3500C2PRO - Retail
HITACHI Deskstar T7K250 HDT722525DLA380 (0A31636) 250GB 7200 RPM SATA
3.0Gb/s Hard Drive
ABIT AN8 32X Socket 939 NVIDIA nForce4 SLI X16 ATX AMD Motherboard


"- HAL9000" <> wrote in message
news:...
> Ok. And what about the hard disk? Or, the other things mentioned on
> the page? Is the problem you are having similar to what is described
> or different?
>
> What makes you think you are loading the correct device driver at F6?
> Reference your statement: "It doesn't matter if i hit f 6 or not". If
> you need a device driver, and you don't give it one, then obviously
> windows installation isn't going to find your disks and install the
> operating system.
>
> Have you tried the windows xp newsgroup?
>
> Did you try testing the memory as Tom suggested?
>
> What is the result of the check disk test you originally mentioned
> that windows installation recommended?
>
> In another thread, Jef found this for troubleshooting a 7b stop error:
> http://support.microsoft.com/default...b;en-us;324103
>
> Forrest
>
> Motherboard Help By HAL web site:
> http://home.comcast.net/~mobo.help/
>
>
> On Sat, 3 Jun 2006 17:34:51 -0600, "bob h" <>
> wrote:
>
>>I'm using my original copy of win xp pro, not an oem
>>when I hit f 6 i load the nv raid drivers on the disk that were
>>supplied
>>by mfg.
>>by the way It doesn't matter if i hit f 6 or not , the screen will go
>>black,
>>then start up again, starting winxp setup over again , then the bsod with
>>these #'s
>>
>
>

I had the same problem with my computer ended up being the CD-ROM, once I replaced that everything worked fine.