Windows will not install

building a new machine. Intel 975XBX board with a D 950 processor and ATI
Crossfire card. Got it started just fine and loaded up XP Pro. Flashed most
current bios and now nothing I do can get the machine to load windows.

ATAT

HD... I tried all different configurations and nothing works. It starts to
load windows drivers and then bombs out... Message is:

Stop: 0x0000007E (0xC0000005,0xF748E0bF, 0Fx78DAZ08, 0xF78D9F08) pci.sys -
Address f748E0BF base at F7487000, Datestamp 3b7d855c



If I could get an earlier bios, that might help, but otherwise, I am
stumped??????


--
______________________________
S. Robert Davidoff, DMD, FACP
Boca Raton, Florida

http://www.dental-implants.com
http://www.dds-online.com
http://www.davidoffdental.com

"Robert Davidoff" <> wrote in message
news:2oudnbaz7Z6gaMLZnZ2dnUVZ_u-...
> building a new machine. Intel 975XBX board with a D 950 processor and ATI Crossfire
> card. Got it started just fine and loaded up XP Pro. Flashed most current bios and now
> nothing I do can get the machine to load windows.
>
> ATAT
>
> HD... I tried all different configurations and nothing works. It starts to load windows
> drivers and then bombs out... Message is:
>
> Stop: 0x0000007E (0xC0000005,0xF748E0bF, 0Fx78DAZ08, 0xF78D9F08) pci.sys - Address
> f748E0BF base at F7487000, Datestamp 3b7d855c
>
>
>
> If I could get an earlier bios, that might help, but otherwise, I am stumped??????

I just noticed that Intel just released BIOS update 1073 for this board on 04/26/06.
Is that the one you installed?

Depending on how old your original BIOS was when you installed XP, it's possible
that the SATA or RAID driver you installed at the time no longer works with the
new firmware installed with the latest BIOS.

I would just re-install XP, after going into BIOS setup and loading the default
BIOS values and saving them. If you're using the RAID feature, go to
http://support.intel.com and download the latest Intel RAID drivers, also
recently updated. Pay attention to whether your connectors are blue or black.

Bob

Well I fixed the problem by installing a version of XP with SP2 on the disc.
Did not have to change Bios or anything else... If anyone wants additional
details, just let me know...

--
______________________________
S. Robert Davidoff, DMD, FACP
Boca Raton, Florida

http://www.dental-implants.com
http://www.dds-online.com
http://www.davidoffdental.com
"Robert Davidoff" <> wrote in message
news:2oudnbaz7Z6gaMLZnZ2dnUVZ_u-...
> building a new machine. Intel 975XBX board with a D 950 processor and ATI
> Crossfire card. Got it started just fine and loaded up XP Pro. Flashed
> most current bios and now nothing I do can get the machine to load
> windows.
>
> ATAT
>
> HD... I tried all different configurations and nothing works. It starts to
> load windows drivers and then bombs out... Message is:
>
> Stop: 0x0000007E (0xC0000005,0xF748E0bF, 0Fx78DAZ08, 0xF78D9F08) pci.sys -
> Address f748E0BF base at F7487000, Datestamp 3b7d855c
>
>
>
> If I could get an earlier bios, that might help, but otherwise, I am
> stumped??????
>
>
> --
> ______________________________
> S. Robert Davidoff, DMD, FACP
> Boca Raton, Florida
>
> http://www.dental-implants.com
> http://www.dds-online.com
> http://www.davidoffdental.com
>