ZNF3-250GB Pro issues.

HI,

When I try to install the digidoc software, an alert windows appears:

--------------------
Unhandled Exception

ErrorNumber 0X80070725
Incompatible verion of the RPC card

Set up will now terminate.
---------------------

It happens at one blockof the end of the installation process.

Can anyone help me ?

Thanks.

--
Martin
http://www.CodedColor.com
Digital Imaging Software

Martin wrote:
> HI,
>
> When I try to install the digidoc software, an alert windows appears:
>
> --------------------
> Unhandled Exception
>
> ErrorNumber 0X80070725
> Incompatible verion of the RPC card
>
> Set up will now terminate.
> ---------------------
>
> It happens at one blockof the end of the installation process.
>
> Can anyone help me ?
>
> Thanks.

Have you tried the latest version?
http://www.chaintechusa.com/tw/eng/D...No=6&PISNo=266

Ugly Mugly a pensé très fort :
> Martin wrote:
>> HI,
>>
>> When I try to install the digidoc software, an alert windows appears:
>>
>> --------------------
>> Unhandled Exception
>>
>> ErrorNumber 0X80070725
>> Incompatible verion of the RPC card
>>
>> Set up will now terminate.
>> ---------------------
>>
>> It happens at one blockof the end of the installation process.
>>
>> Can anyone help me ?
>>
>> Thanks.
>
> Have you tried the latest version?
> http://www.chaintechusa.com/tw/eng/D...No=6&PISNo=266

I just did. Same result. :-(

--
Martin
http://www.CodedColor.com
Digital Imaging Software

Martin wrote:
> Ugly Mugly a pensé très fort :
>> Martin wrote:
>>> HI,
>>>
>>> When I try to install the digidoc software, an alert windows
>>> appears: --------------------
>>> Unhandled Exception
>>>
>>> ErrorNumber 0X80070725
>>> Incompatible verion of the RPC card
>>>
>>> Set up will now terminate.
>>> ---------------------
>>>
>>> It happens at one blockof the end of the installation process.
>>>
>>> Can anyone help me ?
>>>
>>> Thanks.
>>
>> Have you tried the latest version?
>> http://www.chaintechusa.com/tw/eng/D...No=6&PISNo=266
>
> I just did. Same result. :-(

Ok, do you have the latest BIOS for your board?
http://www.chaintechusa.com/tw/eng/D...No=4&PISNo=266

Ugly Mugly a exposé le 29/08/2004 :
> Martin wrote:
>> Ugly Mugly a pensé très fort :
>>> Martin wrote:
>>>> HI,
>>>>
>>>> When I try to install the digidoc software, an alert windows
>>>> appears: --------------------
>>>> Unhandled Exception
>>>>
>>>> ErrorNumber 0X80070725
>>>> Incompatible verion of the RPC card
>>>>
>>>> Set up will now terminate.
>>>> ---------------------
>>>>
>>>> It happens at one blockof the end of the installation process.
>>>>
>>>> Can anyone help me ?
>>>>
>>>> Thanks.
>>>
>>> Have you tried the latest version?
>>> http://www.chaintechusa.com/tw/eng/D...No=6&PISNo=266
>>
>> I just did. Same result. :-(
>
> Ok, do you have the latest BIOS for your board?
> http://www.chaintechusa.com/tw/eng/D...No=4&PISNo=266

No. I have the bios from the first release, dated from 1/16/04.

How to preceed ?

--
Martin
http://www.CodedColor.com
Digital Imaging Software

Martin wrote:
> Ugly Mugly a exposé le 29/08/2004 :
>> Martin wrote:
>>> Ugly Mugly a pensé très fort :
>>>> Martin wrote:
>>>>> HI,
>>>>>
>>>>> When I try to install the digidoc software, an alert windows
>>>>> appears: --------------------
>>>>> Unhandled Exception
>>>>>
>>>>> ErrorNumber 0X80070725
>>>>> Incompatible verion of the RPC card
>>>>>
>>>>> Set up will now terminate.
>>>>> ---------------------
>>>>>
>>>>> It happens at one blockof the end of the installation process.
>>>>>
>>>>> Can anyone help me ?
>>>>>
>>>>> Thanks.
>>>>
>>>> Have you tried the latest version?
>>>> http://www.chaintechusa.com/tw/eng/D...No=6&PISNo=266
>>>
>>> I just did. Same result. :-(
>>
>> Ok, do you have the latest BIOS for your board?
>> http://www.chaintechusa.com/tw/eng/D...No=4&PISNo=266
>
> No. I have the bios from the first release, dated from 1/16/04.
>
> How to preceed ?

First, create a bootable Floppy
http://download.sudhian.com/faq/kt7/...c/drdflash.exe and run the
executable. Insert a blank floppy when prompted.
Second, download this file
ftp://ftp.abit.com.tw/pub/download/fae/awdflash.exe and copy it to the
diskette you just made
Third, download the updated BIOS
http://www.chaintech.com.tw/tw/download/K8/ZN120715.exe and run this
executable and extract it to the floppy.
Fourth, boot from the floppy and run awdflash, and type in the name of the
bin file you copied to the floppy. I should have mentioned, that you should
rename the *.bin file to new.bin so it will be easier to remember. Then when
it asks you to make a backup of your present BIOS, use old.bin as the name.

Après mure réflexion, Ugly Mugly a écrit :
> Martin wrote:
>> Ugly Mugly a exposé le 29/08/2004 :
>>> Martin wrote:
>>>> Ugly Mugly a pensé très fort :
>>>>> Martin wrote:
>>>>>> HI,
>>>>>>
>>>>>> When I try to install the digidoc software, an alert windows
>>>>>> appears: --------------------
>>>>>> Unhandled Exception
>>>>>>
>>>>>> ErrorNumber 0X80070725
>>>>>> Incompatible verion of the RPC card
>>>>>>
>>>>>> Set up will now terminate.
>>>>>> ---------------------
>>>>>>
>>>>>> It happens at one blockof the end of the installation process.
>>>>>>
>>>>>> Can anyone help me ?
>>>>>>
>>>>>> Thanks.
>>>>>
>>>>> Have you tried the latest version?
>>>>> http://www.chaintechusa.com/tw/eng/D...No=6&PISNo=266
>>>>
>>>> I just did. Same result. :-(
>>>
>>> Ok, do you have the latest BIOS for your board?
>>> http://www.chaintechusa.com/tw/eng/D...No=4&PISNo=266
>>
>> No. I have the bios from the first release, dated from 1/16/04.
>>
>> How to preceed ?
>
> First, create a bootable Floppy
> http://download.sudhian.com/faq/kt7/...c/drdflash.exe and run the
> executable. Insert a blank floppy when prompted.
> Second, download this file
> ftp://ftp.abit.com.tw/pub/download/fae/awdflash.exe and copy it to the
> diskette you just made
> Third, download the updated BIOS
> http://www.chaintech.com.tw/tw/download/K8/ZN120715.exe and run this
> executable and extract it to the floppy.
> Fourth, boot from the floppy and run awdflash, and type in the name of the
> bin file you copied to the floppy. I should have mentioned, that you should
> rename the *.bin file to new.bin so it will be easier to remember. Then when
> it asks you to make a backup of your present BIOS, use old.bin as the name.

I've find a home page in my language on the chaintech site. It says
how-to do : just press Alt-F2 at the startup with the .bin file on an
inserted floppy.
DOne it. At least, it works.
Now, I'll try to install all the software.

--
Martin
http://www.CodedColor.com
Digital Imaging Software

Martin a couché sur son écran :
> Après mure réflexion, Ugly Mugly a écrit :
>> Martin wrote:
>>> Ugly Mugly a exposé le 29/08/2004 :
>>>> Martin wrote:
>>>>> Ugly Mugly a pensé très fort :
>>>>>> Martin wrote:
>>>>>>> HI,
>>>>>>>
>>>>>>> When I try to install the digidoc software, an alert windows
>>>>>>> appears: --------------------
>>>>>>> Unhandled Exception
>>>>>>>
>>>>>>> ErrorNumber 0X80070725
>>>>>>> Incompatible verion of the RPC card
>>>>>>>
>>>>>>> Set up will now terminate.
>>>>>>> ---------------------
>>>>>>>
>>>>>>> It happens at one blockof the end of the installation process.
>>>>>>>
>>>>>>> Can anyone help me ?
>>>>>>>
>>>>>>> Thanks.
>>>>>>
>>>>>> Have you tried the latest version?
>>>>>> http://www.chaintechusa.com/tw/eng/D...No=6&PISNo=266
>>>>>
>>>>> I just did. Same result. :-(
>>>>
>>>> Ok, do you have the latest BIOS for your board?
>>>> http://www.chaintechusa.com/tw/eng/D...No=4&PISNo=266
>>>
>>> No. I have the bios from the first release, dated from 1/16/04.
>>>
>>> How to preceed ?
>>
>> First, create a bootable Floppy

>
> I've find a home page in my language on the chaintech site. It says how-to do :
> just press Alt-F2 at the startup with the .bin file on an inserted floppy.
> DOne it. At least, it works.
> Now, I'll try to install all the software.

NO the digidoc stuff is still not installing. >:|

--
Martin
http://www.CodedColor.com
Digital Imaging Software

Martin wrote:
> Martin a couché sur son écran :
>> Après mure réflexion, Ugly Mugly a écrit :
>>> Martin wrote:
>>>> Ugly Mugly a exposé le 29/08/2004 :
>>>>> Martin wrote:
>>>>>> Ugly Mugly a pensé très fort :
>>>>>>> Martin wrote:
>>>>>>>> HI,
>>>>>>>>
>>>>>>>> When I try to install the digidoc software, an alert windows
>>>>>>>> appears: --------------------
>>>>>>>> Unhandled Exception
>>>>>>>>
>>>>>>>> ErrorNumber 0X80070725
>>>>>>>> Incompatible verion of the RPC card
>>>>>>>>
>>>>>>>> Set up will now terminate.
>>>>>>>> ---------------------
>>>>>>>>
>>>>>>>> It happens at one blockof the end of the installation process.
>>>>>>>>
>>>>>>>> Can anyone help me ?
>>>>>>>>
>>>>>>>> Thanks.
>>>>>>>
>>>>>>> Have you tried the latest version?
>>>>>>> http://www.chaintechusa.com/tw/eng/D...No=6&PISNo=266
>>>>>>
>>>>>> I just did. Same result. :-(
>>>>>
>>>>> Ok, do you have the latest BIOS for your board?
>>>>> http://www.chaintechusa.com/tw/eng/D...No=4&PISNo=266
>>>>
>>>> No. I have the bios from the first release, dated from 1/16/04.
>>>>
>>>> How to preceed ?
>>>
>>> First, create a bootable Floppy
>
>>
>> I've find a home page in my language on the chaintech site. It says
>> how-to do : just press Alt-F2 at the startup with the .bin file on
>> an inserted floppy. DOne it. At least, it works.
>> Now, I'll try to install all the software.
>
> NO the digidoc stuff is still not installing. >:|

Ok. Now, have you downloaded the latest motherboard drivers and installed
them?
http://www.chaintechusa.com/tw/eng/D...o=15&PISNo=266

And second, if you have MBM 5.x or later, you MUST uninstall it before you
install DigiDoc...

Ugly Mugly a utilisé son clavier pour écrire :
> Martin wrote:
>> Martin a couché sur son écran :
>>> Après mure réflexion, Ugly Mugly a écrit :
>>>> Martin wrote:
>>>>> Ugly Mugly a exposé le 29/08/2004 :
>>>>>> Martin wrote:
>>>>>>> Ugly Mugly a pensé très fort :
>>>>>>>> Martin wrote:
>>>>>>>>> HI,
>>>>>>>>>
>>>>>>>>> When I try to install the digidoc software, an alert windows
>>>>>>>>> appears: --------------------
>>>>>>>>> Unhandled Exception
>>>>>>>>>
>>>>>>>>> ErrorNumber 0X80070725
>>>>>>>>> Incompatible verion of the RPC card
>>>>>>>>>
>>>>>>>>> Set up will now terminate.
>>>>>>>>> ---------------------
>>>>>>>>>
>>>>>>>>> It happens at one blockof the end of the installation process.
>>>>>>>>>
>>>>>>>>> Can anyone help me ?
>>>>>>>>>
>>>>>>>>> Thanks.
>>>>>>>>
>>>>>>>> Have you tried the latest version?
>>>>>>>> http://www.chaintechusa.com/tw/eng/D...No=6&PISNo=266
>>>>>>>
>>>>>>> I just did. Same result. :-(
>>>>>>
>>>>>> Ok, do you have the latest BIOS for your board?
>>>>>> http://www.chaintechusa.com/tw/eng/D...No=4&PISNo=266
>>>>>
>>>>> No. I have the bios from the first release, dated from 1/16/04.
>>>>>
>>>>> How to preceed ?
>>>>
>>>> First, create a bootable Floppy
>>
>>>
>>> I've find a home page in my language on the chaintech site. It says
>>> how-to do : just press Alt-F2 at the startup with the .bin file on
>>> an inserted floppy. DOne it. At least, it works.
>>> Now, I'll try to install all the software.
>>
>> NO the digidoc stuff is still not installing. >:|
>
> Ok. Now, have you downloaded the latest motherboard drivers and installed
> them?
> http://www.chaintechusa.com/tw/eng/D...o=15&PISNo=266
>
> And second, if you have MBM 5.x or later, you MUST uninstall it before you
> install DigiDoc...

MBM ?

--
Martin
http://www.CodedColor.com
Digital Imaging Software