2460 problems with SATA drives

hoppy269 · 2007-10-17

I have a 2460 with dual 1.2's. I wanted to upgrade the hard drives to SATA. I purchased the Silicom Image 3114 raid 5 capable and installed two WD SATA 1.5 drive into it. The system recognizes the drives at boot and when I have another drive loaded with XP SP2. I cannot get the XP CD to recognize drives either directly connected to the SI3114 or in an Antec external SATA case. I have used the WD Lifeguard software and prepared the drives making them bootable but still no luck, need some help and thanks in advance.

Discussion in 'Tyan' started by hoppy269, Oct 17, 2007.

hoppy269

Joined:

Oct 17, 2007

Messages:

1

Likes Received:

0

I have a 2460 with dual 1.2's. I wanted to upgrade the hard drives to SATA. I purchased the Silicom Image 3114 raid 5 capable and installed two WD SATA 1.5 drive into it. The system recognizes the drives at boot and when I have another drive loaded with XP SP2. I cannot get the XP CD to recognize drives either directly connected to the SI3114 or in an Antec external SATA case. I have used the WD Lifeguard software and prepared the drives making them bootable but still no luck, need some help and thanks in advance.

hoppy269, Oct 17, 2007

#1

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.

Ask a Question

Similar Threads

Welcome to Motherboard Point

Welcome to Motherboard Point a friendly motherboard forum full of tech experts..

Please join our friendly community by clicking the button below - it only takes a few seconds and is totally free. You'll be able to ask questions about your motherboard or chat with the community and help others. Ask a Question