8RDA3+ and ram Compatability how do i know what ram will work ?

Discussion in 'Epox' started by Paul Mathews, Jun 18, 2004.

  1. Paul Mathews

    Paul Mathews Guest

    I want to add some :
    TWINX1024-4000PRO 1GB DDR Kit
    What Corsair has to say about the TWINX1024-4000PRO:

    "The TWINX1024-4000PRO is a 1 GByte matched memory pair specifically
    designed for motherboards using chipsets with dual memory channels.
    This memory kit consists of two CMX512-4000PRO memory modules that
    have been tested together on an 875P dual channel DDR motherboard at
    DDR500 (250 MHz). TwinX memory kits are designed to provide the
    ultimate in performance and stability in dual channel boards. As part
    of Corsair's new XMS ProSeries, each module includes the new
    high-efficiency aluminum XMS heatsink, and 18 activity LED's that show
    the level of memory activity on each bank."

    TWINX1024-4000PRO Features:


    1024 Megabytes of memory - Two matched CMX512-4000PRO modules
    New high-efficiency aluminum XMS heatsink
    95% greater surface area than standard memory heatspreaders
    Thermally bonded to the module
    18 activity LED's show level of memory activity
    Benchmarked over multiple chip sets, processors, and motherboards
    Tested and packaged in pairs
    Modules tested together in an Asus P4C800 test setup
    Tested at DDR500 (250MHz)
    Tested at JEDEC-standard latency settings (3-4-4-8)
    Test voltage 2.75V
    Plug-n-FragTM Auto-Configuration
    Boots automatically using latency values optimized for bus speed
    SPD programmed at JEDEC PC3200 values
    Legendary Corsair reliability and service
    Lifetime warranty

    TWINX1024-4000PRO Specifications:


    Part Number: TWINX1024-4000PRO
    Speed: 500 MHz (PC4000)
    Size: 1024MB (2 x 512MB)
    Package: 2 x 184 DIMM
    Latency: 3-4-4-8
    32M x 8 DDR SDRAMs
    Dimensions: Approximately 1.75" tall x 5.41" long x 0.30" wide; 2.9 oz


    And see if i can get 250mhz fsb with a Mobile Xp 2500 Barton :)


    Does Epox have a mobo ram compatability list anywhere ?


    Thanks from the reviews this board is great for overclocking, no raid
    but cna get a card for that.

    Thanks.
     
    Paul Mathews, Jun 18, 2004
    #1
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.