A7N Overclock

Discussion in 'Abit' started by Guest, Aug 3, 2004.

  1. Guest

    Guest Guest

    **** Post for FREE via your newsreader at post.usenet.com ****

    I have two motherboards, the Abit NF7 (ver. 2.0), and an Abit AN7. I can
    put my Athlon 2500 Barton and DDR 400 memory into my NF7, and get a decent
    overclock of FSB 185, multiplier at 11.5. However, if I put the same
    hardware into the AN7, I get no overclocking at all. Any mismatch from
    preset values gets me the two-tone siren, and a code of A.F. on the status
    display. This code isn't explained in any manual or website I've found so
    far...
    Any ideas why it would work in one MB, but not in the other?




    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
    *** Usenet.com - The #1 Usenet Newsgroup Service on The Planet! ***
    http://www.usenet.com
    Unlimited Download - 19 Seperate Servers - 90,000 groups - Uncensored
    -=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
     
    Guest, Aug 3, 2004
    #1

    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.
Similar Threads

  1. A7N crashing with 2x DDR 512MB RAM works fine with 1

  2. How good is the onboard sound on a A7N-8X .

  3. A7N 266VM verrrrry sluggish

  4. A7N*X-DLX What's the correct MAC address?

  5. A7n-8x-E Dlx

  6. A7n-266C : disk disabled

  7. A7N-VM probs

Loading...