A7N8X Deluxe2.0 w/1005 - Cold Boot Issue

Discussion in 'Asus' started by cal, Jun 29, 2003.

  1. cal

    cal Guest

    Anyone experiencing this? When cold booting system hangs before post.
    After reset it boots perfectly. Wondering if this could be a glitch
    in bios version 1005 as I think it started after bios update. I don't
    think its a power supply issue as after reset it boots fine.

    I'm running:
    XP2600/333
    400 w Antec
    2-256 pc2100 (I'll get better ram when prices drop)
    Pri/Master-ATA100 40gig
    Pri/Slave-ATA66 20gig
    Sec/Master-DVDrom
    Sec/Slave-CDRW
    SATA1-ATA100 20gig w/Iwill converter
    SATA2-not used
    AGP-Gainward Ti-450(Ti-200) Golden Sample (old but still a great card)

    cal
     
    cal, Jun 29, 2003
    #1
    1. Advertisements

  2. Anyone experiencing this? When cold booting system hangs before post.
    No problems here. Been running 1005 since the day it was released.

    XP 2600 (10.5x200)
    2-512MB PC3500 Kingston
    400w Antec
    Pri/Master - WD 120GB ATA100
    Pri/Slave - WD 100GB ATA100
    Sec/Master - HP 200i DVD+RW
    Sec/Slave - TDK 40/12/48 CDRW
    Video - MSI GF4 Ti4200 w/8X AGP

    Jason
     
    Jason Knutson, Jun 29, 2003
    #2
    1. Advertisements

  3. cal

    Greg Surratt Guest

    I'm seeing the same thing with ver 1004. I also have the same problem
    on an IBM board with a P4 1.6 chip. After watching the start up, I've
    concluded it is the auto drive detection routine causing the delays on
    both machines.

    Greg
     
    Greg Surratt, Jun 29, 2003
    #3
  4. cal

    cal Guest

    Find any way around this?

    cal
     
    cal, Jun 30, 2003
    #4
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.