ABIT IC7-MAX3 Raid Issue

Discussion in 'Abit' started by laguna turbo, Mar 30, 2008.

  1. laguna turbo

    laguna turbo

    Mar 30, 2008
    Likes Received:
    I have an Abit IC7-MAX3 motherboard with 3 WD 5000 AAKS (500GB) hard drives connected in raid 0 on the silicon image 3114 controller the problem I am having is that I boot into the Windows XP home SP2 setup press F6 and install the raid driver windows then detects the 1.5 TB logical drive formats it and installs the installation files once complete it restarts the system which would normally go to the second step of the setup but it will not boot into the drive all it does is restart the cd and starts the whole setup process again.

    However if I only set two HDD's as raid 0 the setup completes without any issues:confused:

    Can any one tell me why this is happening as I would really like all three drives in raid 0.
    laguna turbo, Mar 30, 2008
Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.