ABIT IS7 Motherboard Blank Monitor

Discussion in 'Abit' started by JB1300, Dec 12, 2003.

  1. JB1300

    JB1300 Guest

    I have a new ABIT IS7 Motherboard.
    SATA Raptor Hard DRive
    2 512MB PC3200 DDR RAM
    P4 2.6
    ATI 9200 SE
    and other pci devices which are disconnected.
    500 Watt PS

    Plugged everything in. Power on and get fans spinning, 2 led lights,
    but no output from monitor. No beeps either (monitor works on other

    Tried known good video card - same result
    removed all IDE connections and left SATA for HD - same result
    remove CMOS battery and rest CMOS Jumper - Same result
    re-seat all power connections - same result
    remove 1 RAM chip and leave one in - same result
    re-seat CPU - same result

    Any Ideas???
    JB1300, Dec 12, 2003
    1. Advertisements

  2. Presumably you've connected the ATX12v power header *as well as* the normal
    ATX plug?

    Richard Hopkins
    Cardiff, Wales, United Kingdom
    (replace .nospam with .com in reply address)

    The UK's leading technology reseller www.dabs.com
    Out with the old & in with the new at www.dabsxchange.com
    Get the most out of your digital photos www.dabsxpose.com
    Richard Hopkins, Dec 12, 2003
    1. Advertisements

  3. JB1300

    TomG Guest

    try it with the mobo out of the case on a safe work surface.


    Thomas Geery
    Network+ certified

    ftp://geerynet.d2g.com Abit Mirror <----- Cable modem IP
    This IP is dynamic so it *could* change!...
    over 120,000 FTP users served!
    TomG, Dec 13, 2003
    1. Advertisements

Ask a Question

Want to reply to this thread or ask your own question?

You'll need to choose a username for the site, which only take a couple of moments (here). After that, you can post your question and our members will help you out.